Opens in a new tab

BD6231F-E2

H-bridge DC motor driver, 1A, 6-15V, thermal/OCP, SSOP-16, ROHM

2040

Effective Inventory

Image for reference only

Manufacturer Part:

BD6231F-E2

Package:

SSOP-16

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The BD6231F-E2 from ROHM Semiconductor is an H-bridge motor driver IC designed for bidirectional DC motor control. It integrates NPN Darlington output transistors in an H-bridge configuration supporting up to 1A output current with built-in thermal shutdown and over-current protection.

Key Specifications

  • Type: H-Bridge DC Motor Driver
  • Output Configuration: Full H-bridge (bipolar)
  • Supply Voltage: 6-15V
  • Output Current: 1A continuous (per channel)
  • Peak Current: 1.5A
  • V_CE(sat): 1.5V max (upper+lower total)
  • Control: Forward/Reverse/Brake/Stop via logic inputs
  • Protection: Thermal shutdown (150C typical), over-current
  • Package: SSOP-16
  • Operating Temp: -20C to +75C typical

Features

  • Integrated H-bridge for bidirectional motor drive
  • Forward/reverse/brake/stop modes via logic control
  • Built-in thermal shutdown and over-current protection
  • 1A continuous output current
  • Compact SSOP-16 package

Applications

  • DC motor drive in consumer electronics
  • Vending machine dispensing mechanisms
  • Valve and actuator control
  • Printer and scanner motor control
  • Automotive mirror and seat motors
Product Introduction: BD6231F-E2 Product Introduction

The BD6231F-E2 from ROHM is an H-bridge DC motor driver with 1A output, 6-15V supply, and built-in thermal/over-current protection in an SSOP-16 package.

Working Principle: BD6231F-E2 Working Principle

The BD6231F integrates four NPN Darlington transistors in an H-bridge configuration. Logic inputs (FIN, RIN) control the bridge state: FIN high drives forward, RIN high drives reverse, both high activates brake, both low enters standby. Internal clamp diodes protect against inductive kickback.

Pin Description: BD6231F-E2 Pin Definition and Functions
Pin Name Function
1 OUT1 Motor output A
2 VREF Output current reference voltage
3 VCC Motor supply (6-15V)
4 FIN Forward input
5 RIN Reverse input
6 VCC2 Logic supply
7-8 GND Ground
9-10 OUT2 Motor output B
Application Scenarios: In which products and applications is BD6231F-E2 used
  • DC motor drive in consumer electronics
  • Printer and scanner motor control
  • Valve and actuator drive
  • Automotive mirror/seat motor
Alternative Models: What chips are recommended as replacements for BD6231F-E2
Model Manufacturer Spec1 Spec2
BD6232F-E2 ROHM 2A H-bridge SSOP-16
DRV8833PWP TI 2A dual H-bridge HTSSOP-16
TB6612FNG Toshiba 1.2A dual SSOP-24

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1