Opens in a new tab

BQ25792RQMR

5A buck-boost charger, 1-4 cell, USB PD 3.0, dual-input, QFN-29

3930

Effective Inventory

Image for reference only

Manufacturer Part:

BQ25792RQMR

Package:

29-Pin QFN (4.0 x 4.0 x 0.75 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The BQ25792RQMR is a Texas Instruments I2C-controlled 5A 1-4 cell buck-boost battery charger with dual-input selector and USB PD 3.0 OTG output. It integrates 4 switching MOSFETs, input/battery current sensing, and JEITA thermistor support. Packaged in QFN-29, -40C to +85C.

Key Specifications

Charge Current 5 A
Cell Count 1 to 4 cells (Li-ion/Li-Po)
VBUS Range 3.6 V to 24 V
Topology Buck-Boost (4 switches)
Interface I2C / SMBus
USB PD 3.0 OTG output

Features

  • 5A charging with integrated MOSFETs
  • 1-4 cell Li-ion/Li-Po support
  • Dual-input selector (ACDRV1/2)
  • USB PD 3.0 OTG output
  • I2C/SMBus programmable
  • JEITA thermistor compliance
  • Ship mode with 30mA SYS discharge
  • Input current and voltage limiting

Applications

  • USB-C PD chargers for laptops
  • Power banks and portable chargers
  • Dual-input industrial charging
  • Smartphone and tablet fast charging
Product Introduction: BQ25792RQMR Product Introduction

The BQ25792RQMR is a Texas Instruments I2C-controlled 5A buck-boost battery charger designed for 1-4 cell Li-ion and Li-polymer batteries with USB Power Delivery 3.0 support. The integrated 4-switch buck-boost converter charges batteries from any VBUS voltage between 3.6V and 24V, whether above, below, or equal to the battery voltage. The dual-input selector with ACDRV1/ACDRV2 charge-pump drivers automatically selects between two input sources (e.g., USB-C and barrel jack). USB PD 3.0 OTG (On-The-Go) output allows the device to supply power from the battery to a USB-C port in sink mode. All four switching MOSFETs, current sensing circuits, and loop compensation are integrated for a compact solution. The I2C interface provides full programmability of charge voltage, current limits, and switching frequency. JEITA-compliant thermistor monitoring ensures safe charging across the battery temperature range. Ship mode minimizes battery leakage with SDRV-controlled ship FET. Packaged in QFN-29 rated for -40C to +85C.

Working Principle: BQ25792RQMR Working Principle

The BQ25792 uses a 4-switch buck-boost topology with integrated MOSFETs Q1-Q4. When VBUS > VBAT, Q1/Q2 operate as a synchronous buck charger. When VBUS < VBAT, Q3/Q4 operate as a boost charger. When VBUS is near VBAT, all four switches operate in buck-boost mode for seamless regulation across the full input range. The dual-input selector uses charge-pump-driven back-to-back N-channel MOSFETs (ACFET + RBFET) on each input, with automatic selection based on VBUS voltage. For OTG mode, the converter reverses direction, generating VBUS from the battery using the same 4-switch topology. The TS pin monitors battery temperature via NTC thermistor, adjusting charge current/voltage per JEITA profile. The PROG pin resistor sets default switching frequency and charge profile at power-up. The ship FET (SFET) controlled by SDRV disconnects the battery in ship mode for minimum leakage. Thermal regulation reduces charge current at high junction temperatures.

Pin Description: BQ25792RQMR Pin Definition and Functions

29-pin QFN with key pins: VBUS, ACDRV1/2 (input FET drives), QON (ship FET control), CE (charge enable), SCL/SDA (I2C), TS (thermistor), ILIM_HIZ (current limit/HIZ), BATP (battery sense), BTST1/2 (bootstrap), PROG (default config), INT (interrupt), BAT (battery connection), SDRV (ship FET drive), SYS (system output), SW1/SW2 (switch nodes), GND. Refer to datasheet for complete 29-pin QFN mapping.

Application Scenarios: In which products and applications is BQ25792RQMR used
  • USB-C PD laptop charger with 5A charging from 5-20V PD adapters
  • Power bank with OTG output capability and dual-input (USB-C + wireless)
  • Industrial dual-input charger selecting between solar and AC adapter
  • Smartphone/tablet fast charger with JEITA thermistor safety
Alternative Models: What chips are recommended as replacements for BQ25792RQMR
Model Manufacturer Key Difference
BQ25790RQMR TI 3A version
BQ25756 TI Narrower VBUS, different pkg
MP2762A MPS Similar buck-boost charger
ISL9238 Renesas Similar USB PD charger

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1