Opens in a new tab

BQ25792RQMR

I2C 5-A buck-boost battery charger, 1-4 cell, dual-input, USB PD 3.0 OTG, QFN-29

4752

Effective Inventory

Image for reference only

Manufacturer Part:

BQ25792RQMR

Package:

QFN-29 (3.5 x 3.5 x 0.75 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The BQ25792RQMR is a Texas Instruments I2C controlled, 1-4 cell, 5-A buck-boost battery charger with dual-input selector and USB PD 3.0 OTG output. It integrates four switching MOSFETs, input and charging current sensing, battery FET, and all loop compensation. The device operates from 3.6 V to 24 V input and supports USB Type-C and USB PD applications, packaged in a 29-pin QFN (3.5 x 3.5 mm).

Key Specifications

Charging Current Up to 5 A
Battery Cells 1-4 cell Li-ion/Li-Poly
Input Voltage 3.6 V to 24 V
Output Voltage Up to 18.8 V
Topology Buck-Boost
Interface I2C
USB PD 3.0 OTG
Package QFN-29 (3.5 x 3.5 mm)

Features

  • Integrated 4-switch buck-boost converter
  • Dual-input selector with priority logic
  • USB PD 3.0 OTG output (source mode)
  • I2C control interface
  • Integrated MOSFETs, current sensing, BATFET
  • JEITA temperature compliance
  • Thermal regulation and shutdown
  • Ship mode with <1 µA battery leakage
  • Wide input range: 3.6 V to 24 V

Applications

  • Smartphones and tablets USB-C charging
  • Portable power banks
  • USB PD chargers and adapters
  • Industrial handheld devices
  • Multi-cell battery systems
Product Introduction: BQ25792RQMR Product Introduction

The BQ25792RQMR is a Texas Instruments fully integrated switch-mode buck-boost battery charger for 1-cell to 4-cell Li-ion and Li-polymer batteries. It integrates four switching MOSFETs, input and charging current sensing circuits, the battery FET (BATFET), and all loop compensation for a compact design with minimum external components. The dual-input selector automatically selects between two power sources. USB PD 3.0 OTG output capability allows the device to source power to USB-C peripherals. I2C control provides full configurability of charging parameters, input current limits, and OTG voltage. JEITA temperature compliance ensures safe charging across temperature ranges.

Working Principle: BQ25792RQMR Working Principle

The BQ25792 operates as a buck-boost battery charger with multiple subsystems: (1) The 4-switch buck-boost converter regulates the battery voltage and charging current using integrated MOSFETs (Q1-Q4), operating in buck, boost, or buck-boost mode depending on the input-to-output voltage ratio. (2) The dual-input selector monitors two input sources (VBUS1, VBUS2) and automatically selects the higher-priority source using back-to-back N-channel MOSFETs driven by internal charge pumps. (3) The I2C interface allows the host to configure charge voltage, current limits, OTG output voltage, JEITA thresholds, and monitor status/fault registers. (4) The OTG mode reverses the converter to source power from the battery at programmable voltages (3.3-20.8V) for USB PD 3.0 negotiation. (5) Thermal regulation reduces charge current to maintain junction temperature at the programmed limit.

Pin Description: BQ25792RQMR Pin Definition and Functions

29-pin QFN package with key pins: VBUS (input power), PMID (switching node), SW1/SW2 (inductor connections), BAT (battery connection), SYS (system output), SDA/SCL (I2C), ACDRV1/2 (input FET drivers), SDRV (ship FET driver), TS (thermistor), PROG (configuration), ILIM_HIZ (current limit), INT (interrupt), CE (charge enable), QON (ship mode control), BTST1/2 (bootstrap), REGN (internal LDO output), and GND. Refer to the datasheet pin diagram for complete 29-pin mapping.

Application Scenarios: In which products and applications is BQ25792RQMR used
  • USB-C smartphone and tablet chargers with PD 3.0 negotiation (5A, 1-4 cell)
  • Portable power banks with dual-input (USB-C + adapter) and OTG source capability
  • Industrial handheld instruments with multi-cell Li-ion charging from wide input range
  • Laptop and ultrabook battery charging with buck-boost topology
  • USB PD docking stations with source and sink power delivery
Alternative Models: What chips are recommended as replacements for BQ25792RQMR
Model Manufacturer Key Difference
BQ25798RQMR TI Newer version with enhanced features
BQ25756 TI Narrower VDC range charger
BQ24171 TI Standalone 1-cell buck charger
MP2762A MPS Similar buck-boost charger
ISL9238 Renesas Similar buck-boost battery charger

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1