Opens in a new tab

BQ51051BRHLR

Qi Wireless Pwr Rcvr+Charger, 1.5A, 4.35V, VQFN-20

3071

Effective Inventory

Image for reference only

Manufacturer Part:

BQ51051BRHLR

Package:

VQFN-20 (3.5 x 4.5 x 0.95 mm, 0.5mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The BQ51051BRHLR from Texas Instruments is a Qi v1.2-compliant wireless power receiver with integrated Li-Ion/Li-Pol battery charger, 1.5A charging, 93% efficiency, and 20-pin VQFN package.

Key Specifications

Type Qi-Compliant Wireless Power Receiver and Battery Charger
WPC Standard Qi v1.2 compliant
Battery Charge Voltage 4.35V (4.20V/4.40V options available)
Charge Current Up to 1.5A
AC-DC Efficiency 93% (peak)
Input Voltage (RECT) 4V to 10V (recommended); 20V max (absolute)
Synchronous Rectifier RDS(ON) 100 mOhm (typical)
Communication Qi v1.2 inductive (capacitive/resistive load modulation)
Supply Current 8 mA (typical)
Temperature Monitoring TS/CTRL pin with NTC threshold detection
Package VQFN-20 (RHL, 3.5 x 4.5 mm)
Operating Temperature 0C to +125C (junction)

Features

  • Single-stage wireless power receiver + battery charger
  • Qi v1.2 communication protocol compliant
  • 4.35V battery charge voltage (4.20V/4.40V options) Up to 1.5A charge current
  • 93% peak AC-DC charging efficiency
  • Low-impedance synchronous rectifier (100mOhm RDS(ON))
  • Overvoltage protection (20V max input)
  • Overcurrent, thermal shutdown, and fault detection
  • NTC temperature monitoring via TS/CTRL pin
  • AD pin for wired adapter override
  • Dynamic rectifier voltage control for efficiency

Applications

  • Smartphone wireless charging
  • Wireless headset charging
  • Portable device battery packs
  • Wearable device charging
Product Introduction: BQ51051BRHLR Product Introduction

The BQ51051BRHLR from Texas Instruments is a single-chip Qi v1.2-compliant wireless power receiver with an integrated Li-Ion/Li-Pol battery charge controller. The device combines the wireless power receiver (AC-DC rectifier), digital controller for Qi communication, and battery charge controller into a single 3.5×4.5mm VQFN-20 package, minimizing external component count. The synchronous rectifier uses low-RDS(ON) N-MOSFETs (100mOhm typical) to achieve 93% peak AC-DC charging efficiency. The rectified output feeds an LDO that regulates the battery charge voltage and current. The 4.35V charge voltage supports Li-Pol batteries with 4.35V chemistry; 4.20V and 4.40V voltage options are available in the bq51050B and bq51052B variants. The Qi v1.2 communication is implemented through capacitive or resistive load modulation on the COMM1/COMM2 pins, which vary the reflected impedance seen by the transmitter coil to regulate power transfer and send control data. The dynamic rectifier voltage control adjusts the rectifier output voltage to track the battery voltage, minimizing the voltage drop across the LDO and maximizing efficiency across the full charge cycle. The AD pin allows a wired adapter to override wireless charging, automatically switching to the wired source when detected.

Working Principle: BQ51051BRHLR Working Principle

The BQ51051BRHLR operates as a complete wireless power transfer receiver system. The AC signal from the receiver coil (connected to AC1/AC2) is rectified by the internal synchronous rectifier, which uses N-MOSFETs driven by a zero-current switching controller to minimize losses. The rectified DC voltage at the RECT pin is monitored and regulated by the digital controller through Qi communication with the transmitter. The receiver communicates with the transmitter by modulating the load on the receiver coil (capacitive modulation via COMM1/COMM2), which creates a reflected impedance change detectable by the transmitter. The Qi v1.2 protocol sends control error packets to increase or decrease the transmitted power, maintaining the RECT voltage within the target range. The LDO stage regulates the rectified voltage down to the battery charge voltage (4.35V). The battery charge controller implements a CC/CV profile: constant current (up to 1.5A) until the battery reaches 4.35V, then constant voltage until the current tapers to the termination threshold set by the ILIM/TERM pins. The TS/CTRL pin monitors an external NTC thermistor on the battery pack and suspends charging if the temperature is outside the safe range. The FOD (Foreign Object Detection) feature monitors the received power and compares it with the measured battery charge power, reducing the transmitted power if excessive loss is detected (indicating a foreign metal object absorbing power). The AD-EN pin enables an external wired adapter path, which overrides the wireless power when detected.

Pin Description: BQ51051BRHLR Pin Definition and Functions
Pin Name Type Function
1,20 PGND Power Power ground
2 AC1 Input Receiver coil input 1
3 BOOT1 I/O Bootstrap capacitor for rectifier HS FET 1
4 BAT Output Battery charge output (4.35V, 1.5A max)
5 CLMP1 Output Overvoltage clamp capacitor 1
6 COMM1 Output Qi communication load modulation 1
7 CHG Output Charge status output (open-drain)
8 AD-EN Output Adapter detect enable (active when AD>VBAT)
9 AD Input Wired adapter input (overrides wireless)
10 TERM Input Charge termination current set resistor
11 EN2 Input Enable control input
12 ILIM Input Charge current limit set resistor
13 TS/CTRL Input NTC temperature sense / control input
14 FOD Input Foreign Object Detection calibration resistor
15 COMM2 Output Qi communication load modulation 2
16 CLMP2 Output Overvoltage clamp capacitor 2
17 BOOT2 I/O Bootstrap capacitor for rectifier HS FET 2
18 RECT Output Rectified DC voltage (4-10V)
19 AC2 Input Receiver coil input 2
Application Scenarios: In which products and applications is BQ51051BRHLR used
  • Smartphone wireless charging with 4.35V Li-Pol battery, 1.5A CC/CV charging via Qi v1.2 protocol and 93% AC-DC efficiency
  • Wireless headset charging dock using bq51051B with AD pin for USB-C wired override when plugged in
  • Wearable device wireless power with FOD safety and NTC temperature monitoring for safe Li-Ion charging
Alternative Models: What chips are recommended as replacements for BQ51051BRHLR
Manufacturer Part Number Package Notes
TI BQ51050BRHLR VQFN-20 4.20V battery voltage option
TI BQ51052BRHLR VQFN-20 4.40V battery voltage option
TI BQ51013ARHLR VQFN-28 Qi v1.1, separate VOUT (no charger)
NXP NT8034UK WLCSP-28 Qi receiver, similar function
IDT P9221-R QFN-32 Qi receiver with WPC 1.2

Recommend Parts

MSP432P401RIPZR

Ultra-low-power Cortex-M4F MCU, 48MHz, 256KB Flash, 14-bit ADC, 850nA standby, 100-LQFP

Brand: TI

Package: 100-LQFP (14 x 14 x 1.4mm)

IN STOCK: 3750pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PTN78060WAH

4.5A positive-input buck-IT module, adjustable, SMD module

Brand: TI

Package: Module (34.3 x 19.3 x 8.2 mm)

IN STOCK: 4786pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC16F1526-I/PT

8-bit PIC16 MCU, 14KB Flash, 768B RAM, 30-ch 10-bit ADC, 10x CCP, 64-TQFP, XLP

Brand: MICROCHIP

Package: TQFP-64 (10.0 x 10.0 x 1.05 mm)

IN STOCK: 5600pcs

Cargo cycle: 3-7 Days

The minimum order is 1

R2A20178NP

8-channel 8-bit voltage output DAC, R-2R architecture, buffered rail-to-rail output, SPI interface up to 25MHz, 2.7-5.5V

Brand: Renesas

Package: 24-pin HWQFN (4x4x0.75mm)

IN STOCK: 6399pcs

Cargo cycle: 3-7 Days

The minimum order is 1

VS-40CPQ100-N3

Dual Schottky rectifier, common cathode, 2x20A, 100V, 0.61V VF, TO-247AC-3L, Vishay Q-series, 175 degC TJ, guard ring

Brand: VISHAY

Package: TO-247AC 3L (3-lead through-hole, 15.5mm width, tab for heatsink, common cathode configuration)

IN STOCK: 8950pcs

Cargo cycle: 3-7 Days

The minimum order is 1

BSC040N10NS5

OptiMOS 5 N-ch 100V 4mΩ 136A MOSFET, SuperSO8

Brand: infineon

Package: PG-TDSON-8 (SuperSO8, 5 x 6mm)

IN STOCK: 10509pcs

Cargo cycle: 3-7 Days

The minimum order is 1