Opens in a new tab

BUF634P

250mA Hi-Speed Buffer, 2000V/us, 30-180MHz, PDIP-8

2345

Effective Inventory

Image for reference only

Manufacturer Part:

BUF634P

Package:

8-Pin PDIP (9.81 x 6.35 x 5.08 mm, 2.54mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The BUF634P from Texas Instruments (formerly Burr-Brown) is a 250mA high-speed open-loop buffer with 2000V/us slew rate, pin-selectable 30-180MHz bandwidth, and 8-pin PDIP package.

Key Specifications

Type 250mA High-Speed Unity-Gain Open-Loop Buffer
Output Current +/-250 mA (continuous)
Slew Rate 2000 V/us
Bandwidth 30 MHz (low Iq mode) to 180 MHz (wide BW mode)
Gain 0.99 V/V @ RL=1kOhm; 0.93 @ RL=100Ohm (wide BW)
Supply Voltage +/-2.25V to +/-18V (4.5V to 36V total)
Quiescent Current 1.5 mA (low Iq, 30MHz BW); 15 mA (wide BW, 180MHz)
Input Offset Voltage +/-30 mV (typical); +/-100 mV (max)
Input Bias Current +/-0.5 uA (typical, low Iq); +/-5 uA (max, wide BW)
Short-Circuit Current +/-350 mA (typical, low Iq); +/-550 mA (wide BW)
Settling Time (0.1%) 200 ns @ 20V step, RL=100Ohm
Thermal Shutdown 175C (typical)
Package 8-Pin PDIP (P suffix)
Operating Temperature -40C to +85C (specification); -40C to +125C (operating)

Features

  • 250mA continuous output current
  • 2000V/us slew rate
  • Pin-selectable bandwidth: 30MHz (low Iq) to 180MHz (wide BW)
  • Unity-gain open-loop buffer (can be used inside op-amp feedback)
  • +/-2.25V to +/-18V wide supply range
  • Internal current limit and thermal shutdown
  • 8-Pin PDIP through-hole package

Applications

  • Op-amp output current booster
  • Capacitive load driver
  • Headphone driver
  • Coil/cable driver
Product Introduction: BUF634P Product Introduction

The BUF634P from Texas Instruments (originally Burr-Brown) is a 250mA high-speed unity-gain open-loop buffer in an 8-pin PDIP through-hole package. The device is designed to be used inside the feedback loop of an op-amp to increase output current capability, eliminate thermal feedback, and improve capacitive load drive. In the low quiescent current mode (BW pin floating or connected to V- through a resistor), the BUF634 operates on 1.5mA with 30MHz bandwidth and 2000V/us slew rate. In the wide bandwidth mode (BW pin connected directly to V-), the quiescent current increases to 15mA but the bandwidth extends to 180MHz. The 250mA continuous output current and 2000V/us slew rate make the BUF634 ideal for driving heavy loads such as cables, transformers, and headphones while maintaining the precision of the driving op-amp. When placed inside the feedback loop of a precision op-amp, the op-amp’s error correction eliminates the BUF634’s 30mV typical input offset voltage, providing a composite amplifier with the op-amp’s precision and the BUF634’s output drive capability. The internal current limit and thermal shutdown protect the device from fault conditions. The P suffix indicates the 8-pin PDIP through-hole package.

Working Principle: BUF634P Working Principle

The BUF634P is an open-loop unity-gain buffer with a complementary emitter-follower output stage. Unlike a closed-loop buffer, there is no internal feedback from output to input. The input signal drives the bases of complementary NPN and PNP transistors in a push-pull Class AB configuration. The output voltage follows the input voltage with a gain of approximately 0.99 (at light loads) due to the base-emitter voltage drops in the output stage. When used inside the feedback loop of an op-amp, the op-amp senses the buffer output (through its feedback network) and adjusts its own output to compensate for the buffer’s gain error and offset voltage, resulting in a composite amplifier with unity gain accuracy set by the op-amp. The BW pin controls the bias current of the output stage. When the BW pin is open (or connected to V- through a resistor), the output stage is biased at low current (1.5mA total), providing 30MHz bandwidth with Class AB operation that minimizes crossover distortion. When the BW pin is shorted to V-, the bias current increases to 15mA, widening the bandwidth to 180MHz by increasing the speed of the output stage. The 2000V/us slew rate is achieved by the large available current to charge the parasitic and load capacitances. The internal current limit operates by sensing the output current and reducing the drive to the output transistors when the current exceeds approximately 350mA (low Iq mode) or 550mA (wide BW mode). The thermal shutdown at 175C junction temperature disables the output stage to prevent damage.

Pin Description: BUF634P Pin Definition and Functions
Pin Name Type Function
1 BW Input Bandwidth select (float=open, tie to V-=wide BW)
2 NC – No connect
3 VIN Input Signal input
4 V- Power Negative supply
5 NC – No connect
6 V+ Power Positive supply
7 VO Output Buffer output
8 NC – No connect
Application Scenarios: In which products and applications is BUF634P used
  • Composite amplifier with OPA627 + BUF634 inside feedback loop for precision audio headphone driver at +/-15V, 250mA output
  • Capacitive load driver using BUF634 inside OPA227 feedback loop to drive 0.1uF cable load with 2000V/us slew rate
  • Low-Iq instrumentation driver at 1.5mA quiescent with 30MHz bandwidth for portable test equipment cable driving
Alternative Models: What chips are recommended as replacements for BUF634P
Manufacturer Part Number Package Notes
TI BUF634A SOIC-8/TO-220 Upgraded version, 210MHz, 3750V/us
TI BUF634U SOIC-8 SMD version, same function
TI BUF634T TO-220-5 Power package, same die
Analog Devices ADA4870 PSOP-20 1A output, higher current
TI OPA549T TO-220-8 8A power op-amp with buffer function

Recommend Parts

MSP432P401RIPZR

Ultra-low-power Cortex-M4F MCU, 48MHz, 256KB Flash, 14-bit ADC, 850nA standby, 100-LQFP

Brand: TI

Package: 100-LQFP (14 x 14 x 1.4mm)

IN STOCK: 3750pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PTN78060WAH

4.5A positive-input buck-IT module, adjustable, SMD module

Brand: TI

Package: Module (34.3 x 19.3 x 8.2 mm)

IN STOCK: 4786pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC16F1526-I/PT

8-bit PIC16 MCU, 14KB Flash, 768B RAM, 30-ch 10-bit ADC, 10x CCP, 64-TQFP, XLP

Brand: MICROCHIP

Package: TQFP-64 (10.0 x 10.0 x 1.05 mm)

IN STOCK: 5600pcs

Cargo cycle: 3-7 Days

The minimum order is 1

R2A20178NP

8-channel 8-bit voltage output DAC, R-2R architecture, buffered rail-to-rail output, SPI interface up to 25MHz, 2.7-5.5V

Brand: Renesas

Package: 24-pin HWQFN (4x4x0.75mm)

IN STOCK: 6399pcs

Cargo cycle: 3-7 Days

The minimum order is 1

VS-40CPQ100-N3

Dual Schottky rectifier, common cathode, 2x20A, 100V, 0.61V VF, TO-247AC-3L, Vishay Q-series, 175 degC TJ, guard ring

Brand: VISHAY

Package: TO-247AC 3L (3-lead through-hole, 15.5mm width, tab for heatsink, common cathode configuration)

IN STOCK: 8950pcs

Cargo cycle: 3-7 Days

The minimum order is 1

BSC040N10NS5

OptiMOS 5 N-ch 100V 4mΩ 136A MOSFET, SuperSO8

Brand: infineon

Package: PG-TDSON-8 (SuperSO8, 5 x 6mm)

IN STOCK: 10509pcs

Cargo cycle: 3-7 Days

The minimum order is 1