Opens in a new tab

Home » Integrated Circuits ICs » CAT25080YI-GT3

CAT25080YI-GT3

8Kbit SPI EEPROM, 20MHz, 1M cycles, TSSOP-8

11214

Effective Inventory

Image for reference only

Manufacturer Part:

CAT25080YI-GT3

Package:

TSSOP-8

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The CAT25080YI-GT3 from onsemi (formerly Catalyst) is an 8 Kbit SPI serial EEPROM with 20 MHz clock rate and 1 million erase/write cycle endurance. It supports SPI modes 0 and 3 with sector/page protection for critical data integrity.

Key Specifications

Function 8 Kbit SPI serial EEPROM
Density 8 Kbit (1 Kbyte)
Interface SPI (Mode 0 and 3)
Clock Rate Up to 20 MHz
Endurance 1 million erase/write cycles
Supply Voltage 1.8V to 5.5V
Package TSSOP-8 (4.4x3mm)

Working Principle

SPI interface (SI, SO, SCK, CS) provides synchronous serial access to 1024 bytes of non-volatile memory. Page write allows writing 16 bytes at a time. Hardware write-protect (WP) pin and software status register protect against accidental writes. Hold (HOLD) pin pauses serial communication without resetting the device.

Applications

  • Configuration storage
  • Calibration data
  • User preference storage
  • Serial number / ID
Product Introduction: CAT25080YI-GT3 Product Introduction

The CAT25080YI-GT3 from onsemi (formerly Catalyst) is an 8 Kbit SPI serial EEPROM with 20 MHz clock rate and 1 million erase/write cycle endurance. It supports SPI modes 0 and 3 with sector/page protection for critical data integrity.

Working Principle: CAT25080YI-GT3 Working Principle

SPI interface (SI, SO, SCK, CS) provides synchronous serial access to 1024 bytes of non-volatile memory. Page write allows writing 16 bytes at a time. Hardware write-protect (WP) pin and software status register protect against accidental writes. Hold (HOLD) pin pauses serial communication without resetting the device.

Pin Description: CAT25080YI-GT3 Pin Definition and Functions
Pin Name Description
1 CS Chip select (active low)
2 SO Serial data output
3 WP Write protect
4 VSS Ground
5 SI Serial data input
6 SCK Serial clock
7 HOLD Hold
8 VDD Supply
Application Scenarios: In which products and applications is CAT25080YI-GT3 used
  • Configuration storage
  • Calibration data
  • User preference storage
  • Serial number / ID
Alternative Models: What chips are recommended as replacements for CAT25080YI-GT3
Model Manufacturer Key Difference
AT25080B Microchip Equivalent SPI EEPROM

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1