Opens in a new tab

CC1190RGVR

850-950MHz RF front-end with PA+LNA+switch, +27dBm output, VQFN-16 (4x4mm)

2488

Effective Inventory

Image for reference only

Manufacturer Part:

CC1190RGVR

Package:

VQFN-16 (4 x 4 x 0.9mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The CC1190RGVR from Texas Instruments is an 850-950 MHz RF front-end range extender integrating a power amplifier (PA), low-noise amplifier (LNA), RF switch, and matching network. It provides up to 27 dBm output power and 6 dB sensitivity improvement when paired with TI Sub-1 GHz RF transceivers in a 4x4mm VQFN-16 package.

Key Specifications

Frequency Range 850 to 950 MHz
PA Output Power +27 dBm (max)
PA Power Added Efficiency 50% at 26 dBm
LNA Noise Figure 2.9 dB (with switch and matching)
RX Current (High Gain) 3 mA
RX Current (Low Gain) 26 uA
Shutdown Current 50 nA
Supply Voltage 2.0V to 3.7V
Sensitivity Improvement +6 dB (with CC11xx/CC430)
Operating Temperature -40 to 85 C
Package VQFN-16 (4 x 4mm)

Features

  • Integrated PA, LNA, RF switch, and matching network
  • HGM pin for digital gain control
  • 50 nA shutdown current for ultra-low power standby
  • Minimal external components required
  • Seamless interface with CC11xx and CC430 transceivers

Applications

  • Sub-1 GHz ISM band wireless systems
  • Wireless sensor networks (WSN)
  • Smart metering (AMR/AMI)
  • Industrial wireless monitoring and control
  • IEEE 802.15.4g and proprietary Sub-1 GHz systems
Product Introduction: CC1190RGVR Product Introduction

The CC1190RGVR from Texas Instruments is a highly integrated RF front-end device designed to extend the range of Sub-1 GHz wireless systems. It integrates a +27 dBm power amplifier, a low-noise amplifier with 2.9 dB noise figure, an RF switch, and matching network into a single 4x4mm VQFN-16 package. When paired with TI CC11xx or CC430 Sub-1 GHz transceivers, it provides a typical 6 dB sensitivity improvement in receive mode and up to 27 dBm output power in transmit mode, significantly extending communication range for wireless sensor and metering applications.

Working Principle: CC1190RGVR Working Principle

The CC1190RGVR operates as a bidirectional RF front-end that switches between transmit and receive modes. **Transmit Path**: In TX mode, the low-power RF signal from the transceiver enters the PA_IN pin. The integrated power amplifier boosts the signal to +27 dBm output at the PA_OUT/LNA_IN pin. The PA achieves 50% power-added efficiency at 26 dBm output, minimizing current draw from the 2-3.7V supply. **Receive Path**: In RX high-gain mode (HGM=high), the incoming RF signal enters PA_OUT/LNA_IN through the TR switch. The LNA amplifies the signal with 2.9 dB noise figure before it exits at LNA_OUT to the transceiver. In RX low-gain mode (HGM=low), the LNA is bypassed, consuming only 26 uA. **Control Logic**: PA_EN and LNA_EN pins control the operating mode (TX, RX high-gain, RX low-gain, or shutdown). When both are low, the device enters 50 nA shutdown mode. **Matching Network**: Internal matching components minimize external BOM count and simplify PCB layout.

Pin Description: CC1190RGVR Pin Definition and Functions
Pin Name Description
1 PA_IN RF input from transceiver (TX path)
2 LNA_OUT RF output to transceiver (RX path)
3 GND Ground
4 PA_EN Power amplifier enable (active high)
5 LNA_EN LNA enable (active high)
6 HGM High gain mode select (high=high gain, low=low gain)
7 VDD Power supply (2.0V to 3.7V)
8 GND Ground
9 PA_OUT/LNA_IN Antenna port (shared TX output/RX input)
10 GND Ground
11 EP Exposed thermal pad (connect to GND)
Application Scenarios: In which products and applications is CC1190RGVR used
  • Smart Metering: Extending AMR/AMI system range for utility meter reading over Sub-1 GHz
  • Wireless Sensor Networks: Long-range environmental and industrial monitoring with CC1120/CC1101
  • Industrial IoT: Factory automation wireless links operating in 868/915 MHz ISM bands
  • Home Automation: Extended-range Sub-1 GHz control for lighting, HVAC, and security systems
  • Agricultural Monitoring: Wide-area soil moisture and weather station wireless networks
Alternative Models: What chips are recommended as replacements for CC1190RGVR
Model Manufacturer Key Difference
CC1190RGVT TI Same die, 250pcs small reel
RFX2401C RFaxis 2.4GHz front-end, PA+LNA
SX1239IMLTRT Semtech 868/915MHz PA+LNA, QFN-20
SKY65377-11 Skyworks 915MHz front-end module, PA+LNA
ATR4251 Microchip 868/915MHz PA+LNA+Switch

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1