Opens in a new tab

CD4013BE

Dual D flip-flop, CMOS, 3-18V, set/reset, PDIP-14

8000

Effective Inventory

Image for reference only

Manufacturer Part:

CD4013BE

Package:

PDIP-14 (19.3 x 6.35 x 4.57mm, 2.54mm pitch, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The CD4013BE from Texas Instruments contains two independent D-type flip-flops with direct set and reset, positive-edge triggered, in a 14-pin PDIP package — the CMOS equivalent of the 7474 for low-power applications.

Key Specifications

Number of Flip-Flops 2 (dual, independent)
Technology CD4000B CMOS
Trigger Type Positive-edge (rising edge of CLK)
Supply Voltage 3V to 18V
Max Clock Frequency 16MHz typical @ VDD=15V; 8MHz @ 10V
Set (S) Active HIGH (asynchronous, sets Q=1)
Reset (R) Active HIGH (asynchronous, sets Q=0)
Setup Time 20ns typical @ VDD=10V
Operating Temperature -55°C to +125°C
Package PDIP-14 (19.3 x 6.35mm)

Features

  • Dual D-type flip-flops, positive-edge triggered
  • Asynchronous set and reset (active HIGH)
  • Wide supply voltage: 3V to 18V
  • Push-pull outputs (Q and NOT-Q)
  • CMOS 4000B: very low power consumption

Applications

  • Data latch / register
  • Frequency divider (toggle mode)
  • Debounce circuit
  • One-shot / monostable
  • Sync logic in battery-powered designs
Product Introduction: CD4013BE Product Introduction

The CD4013BE from Texas Instruments contains two independent D-type flip-flops with direct set (S, active HIGH) and reset (R, active HIGH) inputs. On each rising edge of the clock, the data at the D input is transferred to the Q output. The asynchronous set and reset override the clocked operation: S=1 forces Q=1, R=1 forces Q=0. The CD4013 is the CMOS equivalent of the TTL 7474, with the advantage of 3V-18V supply range and near-zero static power consumption, making it ideal for battery-powered and low-voltage applications. In toggle mode (D connected to NOT-Q), the CD4013 divides the clock frequency by 2. A single CD4013 can implement a switch debounce circuit (D=1, CLK=button, R=reset), or a set-reset latch (using the S and R inputs without clock). The BE suffix denotes the PDIP-14 package with full temperature range.

Working Principle: CD4013BE Working Principle

The CD4013BE D-type flip-flop captures the value at the D input on the rising edge of the clock and holds it at Q until the next rising edge. The truth table: CLK rising edge with D=0 → Q=0; CLK rising edge with D=1 → Q=1. When CLK is not rising, Q holds its value regardless of D. The asynchronous inputs override the clock: when S=HIGH, Q=1 immediately (regardless of CLK and D); when R=HIGH, Q=0 immediately. When both S and R are HIGH, both Q and NOT-Q go HIGH (invalid state); the final state after both are released is indeterminate. For normal clocked operation, S and R must both be LOW. For toggle mode: connect NOT-Q to D; each rising clock edge toggles Q, dividing the clock by 2. For a data latch: D receives data, CLK rising edge captures it. For debounce: D=VDD, CLK=switch through RC filter (R=100kΩ, C=0.1µF), R=reset button; the RC filter ensures only one clean edge reaches CLK.

Pin Description: CD4013BE Pin Definition and Functions
Pin Name Type Description
1 1Q Output Flip-flop 1 Q output
2 1NOT-Q Output Flip-flop 1 NOT-Q output
3 1CLK Input Flip-flop 1 clock (rising edge)
4 1R Input Flip-flop 1 reset (active HIGH, sets Q=0)
5 1D Input Flip-flop 1 data input
6 1S Input Flip-flop 1 set (active HIGH, sets Q=1)
7 VSS Power Ground
8 2S Input Flip-flop 2 set (active HIGH)
9 2D Input Flip-flop 2 data input
10 2R Input Flip-flop 2 reset (active HIGH)
11 2CLK Input Flip-flop 2 clock (rising edge)
12 2NOT-Q Output Flip-flop 2 NOT-Q output
13 2Q Output Flip-flop 2 Q output
14 VDD Power Supply (3V to 18V)
Application Scenarios: In which products and applications is CD4013BE used
  • Toggle / Divide-by-2: 1NOT-Q → 1D; clock on 1CLK; 1Q = clock/2; cascade for divide-by-4, -8, etc.
  • Data Latch: Data on 1D; 1CLK rising edge captures data to 1Q; hold until next clock
  • Debounce: D=VDD; CLK=button with RC filter (R=100k, C=0.1µF to GND); R=reset; one clean output per press
  • SR Latch: Use S and R inputs only; ignore CLK and D; S pulse sets Q=1, R pulse clears Q=0
  • Shift Register: 1Q → 2D; shared clock; 2-stage shift register; cascade for longer
Alternative Models: What chips are recommended as replacements for CD4013BE
Model Manufacturer Key Difference Package Supply
CD4013BM TI SOIC-14 surface-mount version with identical logic function and 3-18V range SOIC-14 3-18V
CD4013BE TI Through-hole DIP version for prototyping and legacy board repair DIP-14 3-18V
HEF4013BT NXP Pin-compatible CMOS version with improved ESD protection and 3-15V supply SOIC-14 3-15V
MC144013BDR2G onsemi Pin-compatible equivalent with RoHS compliance and AEC-Q100 automotive option SOIC-14 3-18V
74HC74D TI/Nexperia HC CMOS version with higher speed and 2-6V supply for modern logic systems SOIC-14 2-6V
74HC74N TI/Nexperia HC CMOS through-hole version for prototyping with 2-6V supply range DIP-14 2-6V
74HCT74D Nexperia HCT version with TTL-compatible inputs for mixed 5V TTL/CMOS systems SOIC-14 4.5-5.5V

CD4013 is the CMOS 4000-series dual d-type flip-flop operating over the wide 3-18V supply range. The HEF4013 (NXP) and MC144013 (onsemi) are direct pin-compatible equivalents. For higher speed at the cost of narrower voltage range, the 74HC74 HC/HCT families offer significantly faster propagation delay and lower power consumption at 2-6V. Surface-mount versions use the BM/M suffix (SOIC); through-hole versions use the BE suffix (DIP).

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1