Opens in a new tab

CD4029BE

4-bit presettable up/down binary/decade counter, CMOS, PDIP-16

2500

Effective Inventory

Image for reference only

Manufacturer Part:

CD4029BE

Package:

PDIP-16 (19.3 x 6.35 x 4.57mm, 2.54mm pitch, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The CD4029BE from Texas Instruments is a CMOS presettable up/down binary/decade counter with look-ahead carry, selectable between 4-bit binary (0-15) and BCD decade (0-9) counting modes in a 16-pin PDIP package.

Key Specifications

Function Presettable up/down binary/decade counter
Counter Bits 4
Technology CD4000B CMOS
Supply Voltage 3V to 18V
Max Clock Frequency 8MHz typical @ VDD=10V; 11MHz @ VDD=15V
Count Mode Binary (0-15) or Decade (0-9), pin-selectable
Count Direction Up or Down, pin-selectable
Preset Asynchronous via JAM inputs (J1-J4)
Carry Out Active-LOW (goes LOW at terminal count)
Operating Temperature -55°C to +125°C
Package PDIP-16 (19.3 x 6.35mm)

Features

  • Binary or BCD decade mode — pin-selectable
  • Up or down counting — pin-selectable
  • Asynchronous preset via JAM inputs
  • Look-ahead carry for high-speed cascading
  • Parallel or ripple clocking for cascading
  • CMOS 4000B: 3V-18V operation

Applications

  • Programmable frequency divider
  • Up/down event counter
  • Difference counting (up/down)
  • BCD or binary counting
  • Analog-to-digital conversion stages
Product Introduction: CD4029BE Product Introduction

The CD4029BE from Texas Instruments is one of the most versatile counter ICs in the CD4000B family. It combines four features that are rare to find in a single package: (1) Up/down counting — the UP/DOWN pin selects whether the counter increments or decrements on each clock edge. (2) Binary or decade mode — the BINARY/DECADE pin selects between 4-bit binary (0-15) and BCD decade (0-9) counting. (3) Preset capability — the JAM inputs (J1-J4) allow the counter to be loaded with any value asynchronously when PRESET ENABLE is HIGH. (4) Look-ahead carry — the CARRY OUT signal goes LOW one clock before the terminal count, enabling high-speed synchronous cascading. This versatility makes the CD4029 ideal for applications like event counters that increment and decrement, programmable dividers, and A/D converter stages. The BE suffix denotes the PDIP-16 package with full military temperature range (-55°C to +125°C).

Working Principle: CD4029BE Working Principle

The CD4029BE advances one count on the positive edge of the CLOCK when both CARRY-IN (active-LOW) and PRESET ENABLE are LOW. CARRY-IN acts as a clock enable: when HIGH, counting is inhibited. The BINARY/DECADE input selects the counting mode: HIGH = binary (0↔15), LOW = decade (0↔9). The UP/DOWN input selects direction: HIGH = count up, LOW = count down. In binary up mode, the counter sequences 0,1,2…14,15,0,1…; in decade up mode: 0,1,2…8,9,0,1…; in binary down mode: 15,14,13…1,0,15,14…; in decade down mode: 9,8,7…1,0,9,8… When PRESET ENABLE is HIGH, the JAM inputs (J1-J4) are asynchronously loaded into the counter — this allows starting from any value. J1 is the LSB, J4 is the MSB. The CARRY OUT signal is normally HIGH and goes LOW when: (a) counting up and the counter reaches its maximum (15 in binary, 9 in decade), OR (b) counting down and the counter reaches zero, provided CARRY-IN is LOW. This CARRY OUT connects to the CARRY-IN of the next stage for cascading. For synchronous (parallel) cascading, all chips share the same clock; each CARRY OUT feeds the next CARRY IN. For ripple cascading, each CARRY OUT connects to the next chip’s CLOCK input.

Pin Description: CD4029BE Pin Definition and Functions
Pin Name Type Description
1 JAM 1 Input Preset data input (LSB)
2 JAM 2 Input Preset data input
3 JAM 3 Input Preset data input
4 JAM 4 Input Preset data input (MSB)
5 CARRY OUT Output Carry out (active-LOW, goes LOW at terminal count)
6 CARRY IN Input Carry in / Clock enable (active-LOW, LOW=enable)
7 Q4 Output Counter output bit 4 (MSB)
8 VSS Power Ground (0V)
9 Q3 Output Counter output bit 3
10 Q2 Output Counter output bit 2
11 Q1 Output Counter output bit 1 (LSB)
12 CLOCK Input Clock input (positive edge triggered)
13 UP/DOWN Input Count direction (HIGH=up, LOW=down)
14 BINARY/DECADE Input Count mode (HIGH=binary, LOW=decade/BCD)
15 PRESET ENABLE Input Preset enable (HIGH=load JAM inputs, LOW=count)
16 VDD Power Positive supply (3V to 18V)
Application Scenarios: In which products and applications is CD4029BE used
  • Up/Down Event Counter: Sensor pulses → CLOCK; UP/DOWN toggled by direction; BINARY/DECADE=LOW for BCD display; preset to 0 via JAM=0000 + PE pulse
  • Programmable Divider: Preset JAM inputs to N; count down; CARRY OUT on zero → preset again; divides clock by (N+1)
  • BCD Counter with Display: CLOCK in; BINARY/DECADE=LOW; UP/DOWN=HIGH; Q1-Q4 → CD4511 BCD-to-7-segment; CARRY OUT → next CD4029 CLOCK for multi-digit
  • Difference Counter: Two CD4029 chips; one counts up (additions), one counts down (subtractions); difference = up_count − down_count
Alternative Models: What chips are recommended as replacements for CD4029BE
Model Manufacturer Key Difference Package Supply
CD4029BM TI SOIC-16 surface-mount version with identical logic function and 3-18V range SOIC-16 3-18V
CD4029BE TI Through-hole DIP version for prototyping and legacy board repair DIP-16 3-18V
HEF4029BT NXP Pin-compatible CMOS version with improved ESD protection and 3-15V supply SOIC-16 3-15V
MC144029BDR2G onsemi Pin-compatible equivalent with RoHS compliance and AEC-Q100 automotive option SOIC-16 3-18V
74HC192D TI/Nexperia HC CMOS version with higher speed and 2-6V supply for modern logic systems SOIC-16 2-6V
74HC192N TI/Nexperia HC CMOS through-hole version for prototyping with 2-6V supply range DIP-16 2-6V
74HCT192D Nexperia HCT version with TTL-compatible inputs for mixed 5V TTL/CMOS systems SOIC-16 4.5-5.5V

CD4029 is the CMOS 4000-series up/down binary/decade counter operating over the wide 3-18V supply range. The HEF4029 (NXP) and MC144029 (onsemi) are direct pin-compatible equivalents. For higher speed at the cost of narrower voltage range, the 74HC192 HC/HCT families offer significantly faster propagation delay and lower power consumption at 2-6V. Surface-mount versions use the BM/M suffix (SOIC); through-hole versions use the BE suffix (DIP).

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1