Opens in a new tab

CD4051BM96

8:1 CMOS analog mux, 3-20V, 125Ω Ron, logic-level conv, SOIC-16

7600

Effective Inventory

Image for reference only

Manufacturer Part:

CD4051BM96

Package:

SOIC-16 (9.9 x 3.9 x 1.58mm, 1.27mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The CD4051BM96 is a CMOS single 8-channel analog multiplexer/demultiplexer from Texas Instruments with logic-level conversion, 125Ω on-resistance, and break-before-make switching in a SOIC-16 package.

Key Specifications

Configuration 8:1 single-channel multiplexer/demultiplexer
Supply Voltage (VDD) 3V to 20V
Analog Signal Range Up to 20Vp-p (VDD to VEE)
Dual Supply Range ±3V to ±10V
On-Resistance 125Ω typical at VDD=15V
On-Resistance Match 5Ω typical between channels at VDD=15V
Off-State Leakage ±10pA typical at VDD=15V, 25°C
Quiescent Power 0.2µW typical at VDD=10V
Switching Break-before-make
Signal Path Bidirectional
ESD Rating 3000V HBM, 2000V CDM
Operating Temperature -55°C to +125°C
Package SOIC-16 (9.9 x 3.9mm)

Features

  • 8-channel multiplexer with 3-bit binary address selection
  • Wide analog signal range: up to 20Vp-p
  • Low on-resistance: 125Ω typical at 15V
  • Extremely low off-state leakage: ±10pA typical
  • Bidirectional signal path for mux/demux operation
  • Logic-level conversion between digital and analog supplies
  • INH input disables all channels simultaneously
  • Break-before-make switching prevents channel shorting
  • Ultra-low quiescent power: 0.2µW typical

Applications

  • Analog and digital signal multiplexing
  • A/D and D/A converter channel selection
  • Signal gating and routing
  • Data acquisition systems
  • Factory automation and process control
Product Introduction: CD4051BM96 Product Introduction

The CD4051BM96 from Texas Instruments is a CMOS single 8-channel analog multiplexer/demultiplexer with logic-level conversion capability. Three binary address inputs (A, B, C) select one of eight channels to connect to the common output. An inhibit (INH) input disables all channels when high. The device supports analog signals up to 20Vp-p, with the analog range determined by VDD (positive supply) and VEE (negative supply). When VDD=+5V and VEE=-13.5V, analog signals from -13.5V to +5V can be controlled by 0V to 5V digital inputs, providing logic-level conversion. The 125Ω on-resistance at VDD=15V is matched to within 5Ω between channels, ensuring consistent signal transfer. The break-before-make switching prevents momentary shorting between channels during switching. The bidirectional signal path allows use as either a multiplexer (8 inputs to 1 output) or demultiplexer (1 input to 8 outputs). The M96 suffix denotes the SOIC-16 package with tape-and-reel packaging.

Working Principle: CD4051BM96 Working Principle

The CD4051BM96 uses internally decoded CMOS transmission gates to connect the selected channel to the common terminal. Each channel consists of a parallel n-channel and p-channel MOSFET pair (transmission gate) that provides bidirectional conduction when both MOSFETs are turned on. The 3-bit binary address (A, B, C) is decoded by internal logic to select one of eight channels; when the selected channel’s transmission gate is enabled, the n-channel and p-channel MOSFETs both conduct, creating a low-impedance path (125Ω typical at 15V) between the channel I/O and the common terminal. The parallel n/p structure ensures a relatively flat on-resistance over the full analog signal range. When the INH pin is high, all transmission gates are disabled, and all channels present high impedance. The break-before-make circuit ensures that the previously selected channel turns off before the newly selected channel turns on, preventing momentary crosstalk between channels. The logic-level conversion works because the digital inputs are referenced to VDD-VSS while the analog switches operate between VDD-VEE; the internal level-shifting circuitry translates the digital control signals to the appropriate gate drive voltages for the transmission gates.

Pin Description: CD4051BM96 Pin Definition and Functions
Pin Name Type Description
1 CH4 I/O Channel 4 input/output
2 CH6 I/O Channel 6 input/output
3 COM I/O Common output/input
4 CH7 I/O Channel 7 input/output
5 CH5 I/O Channel 5 input/output
6 INH Input Inhibit (high = all channels off)
7 VEE Power Negative analog supply
8 VSS Power Ground (digital reference)
9 C Input Address bit C (MSB)
10 B Input Address bit B
11 A Input Address bit A (LSB)
12 CH3 I/O Channel 3 input/output
13 CH0 I/O Channel 0 input/output
14 CH1 I/O Channel 1 input/output
15 CH2 I/O Channel 2 input/output
16 VDD Power Positive supply (3V to 20V)
Application Scenarios: In which products and applications is CD4051BM96 used
  • Data Acquisition: 8-channel mux selects one of 8 sensors for a single ADC input, reducing ADC count and cost
  • Signal Routing: Bidirectional path and INH pin enable flexible signal routing in test and measurement equipment
  • Level Conversion: VEE=-13.5V allows switching bipolar analog signals with unipolar (0-5V) digital control
  • Process Control: 0.2µW quiescent power and ±10pA leakage suit battery-powered field instruments
  • Audio Switching: 5Ω Ron match and -50dB crosstalk (at 8MHz) provide clean channel switching for audio routing
Alternative Models: What chips are recommended as replacements for CD4051BM96
Model Manufacturer Key Difference Package Supply
CD4051BM TI SOIC-16 surface-mount version with identical logic function and 3-18V range SOIC-16 3-18V
CD4051BE TI Through-hole DIP version for prototyping and legacy board repair DIP-16 3-18V
HEF4051BT NXP Pin-compatible CMOS version with improved ESD protection and 3-15V supply SOIC-16 3-15V
MC144051BDR2G onsemi Pin-compatible equivalent with RoHS compliance and AEC-Q100 automotive option SOIC-16 3-18V
74HC4051D TI/Nexperia HC CMOS version with higher speed and 2-6V supply for modern logic systems SOIC-16 2-6V
74HC4051N TI/Nexperia HC CMOS through-hole version for prototyping with 2-6V supply range DIP-16 2-6V
74HCT4051D Nexperia HCT version with TTL-compatible inputs for mixed 5V TTL/CMOS systems SOIC-16 4.5-5.5V

CD4051 is the CMOS 4000-series 8-channel analog multiplexer/demultiplexer operating over the wide 3-18V supply range. The HEF4051 (NXP) and MC144051 (onsemi) are direct pin-compatible equivalents. For higher speed at the cost of narrower voltage range, the 74HC4051 HC/HCT families offer significantly faster propagation delay and lower power consumption at 2-6V. Surface-mount versions use the BM/M suffix (SOIC); through-hole versions use the BE suffix (DIP).

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1