Opens in a new tab

CD4066BM96

Quad CMOS bilateral switch, 125Ω Ron, 10pA leak, 40MHz, SOIC-14

9200

Effective Inventory

Image for reference only

Manufacturer Part:

CD4066BM96

Package:

SOIC-14 (9.9 x 3.9 x 1.58mm, 1.27mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The CD4066BM96 is a CMOS quad bilateral analog switch from Texas Instruments with 125Ω on-resistance, 10pA off-state leakage, and 40MHz bandwidth in a SOIC-14 package.

Key Specifications

Number of Switches 4 (SPST, independent control)
Supply Voltage (VDD) 3V to 18V
Analog Signal Range Up to 15Vp-p (VDD to VSS)
On-Resistance 125Ω typical at VDD=15V
On-Resistance Match 5Ω typical between channels at VDD=15V
Off-State Leakage 10pA typical at VDD=10V, 25°C
Bandwidth (On) 40MHz typical
Crosstalk -50dB typical at 8MHz, RL=1kΩ
Harmonic Distortion <0.5% typical at 1kHz, 5Vp-p
On/Off Ratio 80dB typical at 10kHz, RL=1kΩ
Control Input Impedance 10^12Ω typical
Signal Path Bidirectional
Operating Temperature -55°C to +125°C
Package SOIC-14 (9.9 x 3.9mm)

Features

  • 4 independent SPST bilateral switches with individual control
  • 125Ω typical on-resistance at 15V (lower than CD4016B)
  • Flat on-resistance across full signal input range
  • 10pA off-state leakage for low offset current
  • 40MHz bandwidth for video and RF signal switching
  • -50dB crosstalk between switches at 8MHz
  • <0.5% THD for high-fidelity audio switching
  • Bidirectional signal path (transmit in either direction)
  • Pin-compatible with CD4016B (but lower Ron)
  • Extremely high control input impedance (10^12Ω)

Applications

  • Analog signal switching and multiplexing
  • Audio and video signal routing
  • Sample-and-hold circuits (CD4016B recommended)
  • Modulators, demodulators, and choppers
  • Programmable gain and filter circuits
Product Introduction: CD4066BM96 Product Introduction

The CD4066BM96 from Texas Instruments is a quad bilateral switch intended for the transmission or multiplexing of analog or digital signals. It contains four independent single-pole single-throw (SPST) switches, each controlled by its own control input. The device is pin-compatible with the CD4016B but offers significantly lower on-resistance (125Ω vs. 500Ω at 15V) and flatter on-resistance over the signal input range. The 10pA off-state leakage current at 25°C makes it suitable for precision sample-and-hold and integrator circuits. The 40MHz bandwidth and -50dB crosstalk support video signal switching. The bidirectional signal path allows use as either a switch or a multiplexer. The matched control-input-to-signal-output capacitance reduces output transients during switching. The M96 suffix denotes the SOIC-14 package with tape-and-reel packaging.

Working Principle: CD4066BM96 Working Principle

Each of the four switches in the CD4066BM96 consists of a parallel n-channel and p-channel MOSFET pair forming a transmission gate. When the control input (nC) is high (near VDD), both the n-channel and p-channel MOSFETs conduct, creating a low-impedance bidirectional path between the switch I/O pins. The parallel n/p structure is critical because the n-channel conducts well for signals near VSS but poorly near VDD, while the p-channel conducts well near VDD but poorly near VSS. Together, they provide a relatively flat on-resistance (125Ω typical at 15V) across the full signal range from VSS to VDD. When the control input is low (near VSS), both MOSFETs are off and the switch presents high impedance. The extremely low 10pA off-state leakage results from the fully complementary CMOS structure where both transistors are completely cutoff. The bidirectional nature comes from the symmetric MOSFET structure: current can flow in either direction through the transmission gate. The -50dB crosstalk specification is achieved because each switch is isolated by the high-impedance off-state of adjacent switches and by layout techniques that minimize parasitic coupling. For sample-and-hold applications, the CD4016B is recommended because its higher but more consistent off-state leakage provides more predictable charge injection characteristics.

Pin Description: CD4066BM96 Pin Definition and Functions
Pin Name Type Description
1 1C Input Switch 1 control (high=on)
2 1I/O I/O Switch 1 input/output
3 2I/O I/O Switch 2 input/output
4 2C Input Switch 2 control (high=on)
5 3C Input Switch 3 control (high=on)
6 3I/O I/O Switch 3 input/output
7 VSS Power Ground (negative supply)
8 4I/O I/O Switch 4 input/output
9 3I/O I/O Switch 3 input/output
10 4C Input Switch 4 control (high=on)
11 4I/O I/O Switch 4 input/output
12 1I/O I/O Switch 1 input/output
13 2I/O I/O Switch 2 input/output
14 VDD Power Positive supply (3V to 18V)

CD4066BM96 uses the SOIC-14 surface-mount package: VDD at Pin 14, VSS at Pin 7. Four independent bilateral switches: SW1 (Pin 1 in/out, Pin 2 in/out, Pin 13 control), SW2 (Pin 3 in/out, Pin 4 in/out, Pin 5 control), SW3 (Pin 8 in/out, Pin 9 in/out, Pin 6 control), SW4 (Pin 10 in/out, Pin 11 in/out, Pin 12 control). Each switch conducts bidirectionally when its control pin is HIGH. The bilateral nature means signal can flow in either direction — there is no dedicated input or output. On-resistance is typically 50Ω at 15V supply and 270Ω at 5V. For lower on-resistance, 74HC4066 provides 35Ω at 5V. The BM96 suffix denotes SOIC-16 tape-and-reel from TI.

Application Scenarios: In which products and applications is CD4066BM96 used
  • Audio Routing: <0.5% THD and 40MHz bandwidth pass audio signals without audible distortion; 4 switches handle L/R routing
  • Video Switching: 40MHz bandwidth and -50dB crosstalk handle composite video; low Ron preserves signal amplitude
  • Programmable Filters: Switch different R/C networks in and out of active filter circuits under MCU control
  • Chopper Applications: 10pA off-leakage minimizes charge injection errors in chopper-stabilized amplifiers
  • Mux Networks: 4 independent switches with individual control build custom multiplexer configurations beyond fixed 8:1 or 4:1 muxes
Alternative Models: What chips are recommended as replacements for CD4066BM96
Model Manufacturer Key Difference Package Supply
CD4066BM TI SOIC-14 surface-mount version with identical logic function and 3-18V range SOIC-14 3-18V
CD4066BE TI Through-hole DIP version for prototyping and legacy board repair DIP-14 3-18V
HEF4066BT NXP Pin-compatible CMOS version with improved ESD protection and 3-15V supply SOIC-14 3-15V
MC144066BDR2G onsemi Pin-compatible equivalent with RoHS compliance and AEC-Q100 automotive option SOIC-14 3-18V
74HC4066D TI/Nexperia HC CMOS version with higher speed and 2-6V supply for modern logic systems SOIC-14 2-6V
74HC4066N TI/Nexperia HC CMOS through-hole version for prototyping with 2-6V supply range DIP-14 2-6V
74HCT4066D Nexperia HCT version with TTL-compatible inputs for mixed 5V TTL/CMOS systems SOIC-14 4.5-5.5V

CD4066 is the CMOS 4000-series quad bilateral switch operating over the wide 3-18V supply range. The HEF4066 (NXP) and MC144066 (onsemi) are direct pin-compatible equivalents. For higher speed at the cost of narrower voltage range, the 74HC4066 HC/HCT families offer significantly faster propagation delay and lower power consumption at 2-6V. Surface-mount versions use the BM/M suffix (SOIC); through-hole versions use the BE suffix (DIP).

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1