Opens in a new tab

CD4511BE

BCD-to-7-segment latch/decoder/driver, 25mA, PDIP-16

5000

Effective Inventory

Image for reference only

Manufacturer Part:

CD4511BE

Package:

PDIP-16 (19.3 x 6.35 x 4.57mm, 2.54mm pitch, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The CD4511BE from Texas Instruments is a CMOS BCD-to-7-segment latch/decoder/driver with active-HIGH segment outputs, capable of directly driving common-cathode LED displays at up to 25mA per segment in a 16-pin PDIP package.

Key Specifications

Function BCD-to-7-segment latch/decoder/driver
Supply Voltage 3V to 18V
Input 4-bit BCD (D, C, B, A)
Output 7 segment outputs (a-g), active HIGH
Output Current 25mA per segment @ VDD=10V
Latch Enable Active LOW (transparent when LOW)
Lamp Test Active LOW (all segments on)
Blanking Active LOW (all segments off, for leading zero suppression)
Invalid BCD (10-15) All segments off (blank)
Operating Temperature -55°C to +125°C
Package PDIP-16 (19.3 x 6.35mm)

Features

  • BCD-to-7-segment decode + latch in one IC
  • 25mA output drive — directly drives LEDs
  • Lamp test input — all segments on for diagnostics
  • Ripple blanking input — leading zero suppression
  • Blanking on invalid BCD inputs (10-15)
  • CMOS 4000B: 3V-18V operation

Applications

  • BCD counter display driver
  • Multiplexed multi-digit displays
  • Digital clock and timer
  • Instrumentation panel display
Product Introduction: CD4511BE Product Introduction

The CD4511BE from Texas Instruments is a CMOS BCD-to-7-segment latch/decoder/driver that accepts a 4-bit BCD input and drives a common-cathode 7-segment LED display. Unlike the CD4026 (which is a counter+decoder), the CD4511 only decodes — it doesn’t count. This makes it suitable for use with external counters (CD4017, CD4029, 74LS90, or microcontroller BCD outputs). The 25mA output current per segment is sufficient to directly drive LEDs with appropriate current-limiting resistors (typically 220Ω-1kΩ per segment at 5V). The latch stores the BCD value when LE goes HIGH, freezing the display while the input changes. The Lamp Test (LT, active LOW) turns all segments on simultaneously for display verification. The Blanking Input (BI, active LOW) turns all segments off for leading zero suppression or display multiplexing. Invalid BCD inputs (10-15) are automatically blanked. The BE suffix denotes the PDIP-16 package with full temperature range.

Working Principle: CD4511BE Working Principle

The CD4511BE has three functional blocks: (1) A 4-bit transparent latch controlled by LE: when LE is LOW, the latch is transparent (outputs follow inputs); when LE goes HIGH, the current BCD value is latched and held. (2) A BCD-to-7-segment decoder that converts the latched BCD value to 7-segment format. Digits 0-9 produce normal segment patterns; digits 10-15 (invalid BCD) produce blank output (all segments off). (3) An output driver that provides active-HIGH current-limited outputs capable of sourcing up to 25mA per segment. The three control inputs override the decoded output: LT (Lamp Test) activates all segments regardless of BCD input — used to check for burned-out LEDs. BI (Blanking Input) deactivates all segments — used for display blanking during multiplexing or for leading zero suppression. When both LT and BI are inactive (HIGH), the segment outputs follow the decoded BCD value. For leading zero suppression: connect the RBI of the most significant digit to GND; if that digit is 0, its segments are blanked AND its RBO goes LOW; connect this RBO to the next digit’s RBI, causing cascading blanking of leading zeros. The 4511 does NOT have a Ripple Blanking Output (RBO) — for ripple blanking, use the CD4543 or handle it with external logic.

Pin Description: CD4511BE Pin Definition and Functions
Pin Name Type Description
1 B Input BCD input B (2^1)
2 C Input BCD input C (2^2)
3 LT Input Lamp test (active LOW, all segments on)
4 BI Input Blanking input (active LOW, all segments off)
5 LE Input Latch enable (LOW=transparent, HIGH=latched)
6 D Input BCD input D (MSB, 2^3)
7 A Input BCD input A (LSB, 2^0)
8 VSS Power Ground
9 e Output Segment e output
10 d Output Segment d output
11 c Output Segment c output
12 b Output Segment b output
13 a Output Segment a output
14 g Output Segment g output
15 f Output Segment f output
16 VDD Power Supply (3V to 18V)
Application Scenarios: In which products and applications is CD4511BE used
  • Single Digit Display: MCU 4-bit BCD → CD4511 inputs D,C,B,A; LE=LOW; 220Ω resistors on a-g; common-cathode display; displays 0-9
  • Multiplexed 4-Digit: One CD4511; 4 common-cathode displays; digit enable via PNP transistors; MCU scans digits at 100Hz
  • Counter Display: CD4017 or 74LS90 counter → CD4511 BCD inputs; LE=LOW (transparent); displays count on 7-segment
  • Latched Display: LE=LOW to load value; then LE=HIGH to freeze display; MCU can change BCD without affecting displayed value
Alternative Models: What chips are recommended as replacements for CD4511BE
Model Manufacturer Key Difference Package Supply
CD4511BM TI SOIC-16 surface-mount version with identical logic function and 3-18V range SOIC-16 3-18V
CD4511BE TI Through-hole DIP version for prototyping and legacy board repair DIP-16 3-18V
HEF4511BT NXP Pin-compatible CMOS version with improved ESD protection and 3-15V supply SOIC-16 3-15V
MC144511BDR2G onsemi Pin-compatible equivalent with RoHS compliance and AEC-Q100 automotive option SOIC-16 3-18V
74HC4511D TI/Nexperia HC CMOS version with higher speed and 2-6V supply for modern logic systems SOIC-16 2-6V
74HC4511N TI/Nexperia HC CMOS through-hole version for prototyping with 2-6V supply range DIP-16 2-6V
74HCT4511D Nexperia HCT version with TTL-compatible inputs for mixed 5V TTL/CMOS systems SOIC-16 4.5-5.5V

CD4511 is the CMOS 4000-series bcd-to-7-segment latch/decoder/driver operating over the wide 3-18V supply range. The HEF4511 (NXP) and MC144511 (onsemi) are direct pin-compatible equivalents. For higher speed at the cost of narrower voltage range, the 74HC4511 HC/HCT families offer significantly faster propagation delay and lower power consumption at 2-6V. Surface-mount versions use the BM/M suffix (SOIC); through-hole versions use the BE suffix (DIP).

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1