Opens in a new tab

CDCLVC1104PWR

1:4 LVCMOS clock buffer, 70fs additive jitter, <50ps skew, 250MHz, TSSOP-8

5278

Effective Inventory

Image for reference only

Manufacturer Part:

CDCLVC1104PWR

Package:

TSSOP-8 (3.0 × 6.4 × 1.05 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The CDCLVC1104PWR is a low-jitter 1:4 LVCMOS fan-out clock buffer from Texas Instruments, packaged in an 8-pin TSSOP (PW) package. It provides four LVCMOS output copies of a single LVCMOS input with an additive jitter of only 70 fs typical and output skew of less than 50 ps. The device operates from 2.5V or 3.3V supplies and supports frequencies up to 250 MHz at 3.3V.

Key Specifications

Function 1:4 LVCMOS Fan-out Clock Buffer
Fan-out Ratio 1:4
Additive Jitter 70 fs (typical), < 100 fs
Output Skew < 50 ps (pin-to-pin)
Supply Voltage 2.5V or 3.3V
Max Frequency 250 MHz (3.3V), 180 MHz (2.5V)
Input/Output LVCMOS
Output Enable Asynchronous (1G pin)
Package TSSOP-8 (3.0 × 6.4 mm)
Operating Temperature -40°C to +85°C

Features

  • Ultra-low additive jitter: 70 fs typical for minimal timing degradation
  • Low output skew: < 50 ps for tight clock alignment
  • Pin-compatible family from 1:2 to 1:12 fan-out configurations
  • Asynchronous output enable for flexible system control
  • Supports 2.5V and 3.3V supply voltages
  • Small 8-pin TSSOP package for space-constrained designs

Applications

  • Clock tree fan-out in communication systems
  • FPGA and processor clock distribution
  • ADC/DAC sample clock buffering
  • Industrial control system clock trees
  • Consumer electronics clock distribution
Product Introduction: CDCLVC1104PWR Product Introduction

The CDCLVC1104 is a low-jitter, high-fan-out LVCMOS clock buffer that produces four identical copies of a single LVCMOS input clock. With additive jitter of only 70 fs typical and output skew below 50 ps, it preserves the timing integrity of precision clock sources throughout the distribution network. The device is part of a pin-compatible family ranging from 1:2 to 1:12 fan-out configurations, allowing designers to scale clock distribution without board layout changes. The LMK1C1104 is a newer pin-compatible version that also supports 1.8V supply operation with even lower jitter performance.

Working Principle: CDCLVC1104PWR Working Principle

The CDCLVC1104 receives a single-ended LVCMOS clock input and distributes it to four identical LVCMOS output drivers through a carefully matched internal clock tree. The input buffer converts the LVCMOS signal to an internal logic level, which is then routed through symmetric metal traces to four output drivers. The matched trace lengths and balanced driver impedances ensure that all four outputs switch simultaneously within 50 ps of each other (output skew). The output enable (1G) pin provides asynchronous control to tri-state all outputs when de-asserted, allowing clock gating for power management. The low additive jitter is achieved through low-noise internal bias circuits and fast edge rates on the output drivers.

Pin Description: CDCLVC1104PWR Pin Definition and Functions
Pin Name Type Function
1 1G Input Output enable — active high, asynchronous
2 1Y1 Output Output 1 — LVCMOS clock copy
3 GND Power Ground
4 1Y2 Output Output 2 — LVCMOS clock copy
5 1Y3 Output Output 3 — LVCMOS clock copy
6 VDD Power Supply (2.5V or 3.3V)
7 1Y4 Output Output 4 — LVCMOS clock copy
8 1A Input LVCMOS clock input
Application Scenarios: In which products and applications is CDCLVC1104PWR used
  • FPGA system clock fan-out to multiple peripherals and clock domains
  • High-speed ADC/DAC sample clock distribution to data converters
  • Processor and SoC reference clock buffering in server platforms
  • Industrial PLC clock tree distribution across multiple I/O modules
  • Video timing generator clock fan-out in broadcast equipment
Alternative Models: What chips are recommended as replacements for CDCLVC1104PWR
Manufacturer Part Number Package Notes
TI LMK1C1104PWR TSSOP-8 Newer, 1.8/2.5/3.3V, lower jitter
TI CDCLVC1106PWR TSSOP-8 1:6 fan-out variant
Renesas 8SLVP1208 TSSOP-8 1:2 LVCMOS fan-out buffer
Microchip SY89873U SOIC-8 1:4 LVDS/CMOS fan-out
onsemi MC100LVEP14 SOIC-8 1:4 PECL fan-out

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1