Opens in a new tab

Home » Integrated Circuits ICs » CF3817TPG060

CF3817TPG060

Phototransistor optocoupler, 5000V isolation, 50-600% CTR, 35V VCEO, 6-pin DIP with base pin

12345

Effective Inventory

Image for reference only

Manufacturer Part:

CF3817TPG060

Package:

6-DIP

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The CF3817TPG060 is a high-performance phototransistor optocoupler (photocoupler) designed for signal transmission with electrical isolation between input and output circuits. This device consists of a gallium arsenide infrared emitting diode (IRED) optically coupled to a silicon NPN phototransistor, all housed in a 6-pin DIP package with base connection for enhanced design flexibility. The optocoupler provides 5000Vrms isolation voltage and is suitable for use in power supply feedback circuits, digital logic isolation, and various industrial control applications requiring galvanic isolation.

Key Specifications

Type Phototransistor Optocoupler
Input Side Infrared LED (GaAs)
Output Side Silicon NPN Phototransistor
Isolation Voltage (VISO) 5000 Vrms (1 min)
Current Transfer Ratio (CTR) 50-600% at IF=5mA, VCE=5V
Collector-Emitter Voltage (VCEO) 35 V min
Collector-Base Voltage (VCBO) 70 V min
Saturation Voltage (VCE(sat)) 0.2 V max at IF=20mA, IC=1mA
Rise/Fall Time (tr/tf) 3µs / 4µs typical
Package 6-Pin DIP (through-hole)
Operating Temperature -55°C ~ +110°C

Features

  • High isolation voltage: 5000 Vrms
  • Wide CTR range: 50% to 600%
  • 6-pin DIP package with base connection
  • Fast switching speed
  • UL recognized (E214129 equivalent)
  • VDE approved (DIN EN 60747-5-5)
  • RoHS compliant and halogen-free
  • High collector-emitter voltage: 35V
  • Low saturation voltage
  • Long term reliability

Applications

  • Switch-mode power supply feedback
  • Digital logic signal isolation
  • Microprocessor system interface
  • Programmable logic controllers (PLC)
  • Industrial automation and control
  • Telecommunications equipment
  • Home appliances
  • Motor drive control
Product Introduction: CF3817TPG060 Product Introduction

The CF3817TPG060 is a 6-pin DIP phototransistor optocoupler featuring an infrared emitting diode optically coupled to a silicon NPN phototransistor with base terminal access. This configuration provides designers with flexibility in setting the CTR (Current Transfer Ratio) and frequency response through external base resistance. The device provides 5000Vrms of electrical isolation between input and output, making it suitable for safety-critical isolation applications. With a CTR range of 50% to 600% at IF=5mA and VCE=5V, it offers multiple CTR grades to match specific application requirements. The phototransistor output provides a collector-emitter voltage rating of 35V, enabling direct interfacing with common logic and power supply voltage levels. The device is packaged in a standard 6-pin DIP through-hole package, compatible with automated insertion equipment, and is designed for reliable operation over a -55°C to +110°C temperature range. It is commonly used in switch-mode power supply feedback loops, digital logic isolation, microprocessor interface circuits, and industrial control systems.

Working Principle: CF3817TPG060 Working Principle

The CF3817TPG060 optocoupler operates on the principle of optical coupling between an infrared LED input and a phototransistor output, providing complete electrical isolation between two circuits. When a forward current (IF) flows through the input LED (pins 1-2), it emits infrared light proportional to the current. This light is transmitted across an insulating gap and is incident on the base region of the phototransistor (pins 3-5-6). The absorbed photons generate electron-hole pairs in the base-collector junction, creating a photocurrent that acts as the base drive for the transistor. This causes the collector-emitter path to conduct, with the collector current (IC) being approximately CTR × IF. The base terminal (pin 6) is available for external connection, allowing the designer to add a base-emitter resistor to adjust the device’s sensitivity, frequency response, and noise immunity. Without external base resistor, the device operates with maximum sensitivity. When used in switching mode, the phototransistor saturates at low VCE(sat) when sufficient LED current is applied, and turns off when the LED current is removed. The isolation between input and output (5000Vrms) is achieved through the physical separation of the LED and phototransistor, with the intervening transparent dielectric material providing the insulating barrier.

Pin Description: CF3817TPG060 Pin Definition and Functions
Pin Number Pin Name Type Description
1 Anode Input LED anode (forward current input)
2 Cathode Input LED cathode (ground return)
3 N.C. – No internal connection
4 Emitter Output Phototransistor emitter
5 Collector Output Phototransistor collector
6 Base Output Phototransistor base (external access)
Application Scenarios: In which products and applications is CF3817TPG060 used
  • Switch-mode power supply voltage feedback
  • Digital logic level translation and isolation
  • Microprocessor and MCU interface circuits
  • Programmable logic controller I/O isolation
  • Industrial sensor signal conditioning
  • Telecom equipment line cards
  • Home appliance control boards
  • AC motor drive control circuits
Alternative Models: What chips are recommended as replacements for CF3817TPG060
Manufacturer Part Number Description
Everlight EL817 Phototransistor optocoupler, 4-DIP, 5000V isolation
ON Semiconductor 4N25 Phototransistor optocoupler with base, 6-DIP
Vishay CNY17-1 Phototransistor optocoupler, 6-DIP, 5300V
Lite-On LTV-817 Phototransistor optocoupler, 4-DIP

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1