Opens in a new tab

CSS1604SS-MI

16Mb SPI/QPI PSRAM, 2Mx8, 1.62~3.6V, 133MHz, self-refresh, SOP-8L, industrial

6789

Effective Inventory

Image for reference only

Manufacturer Part:

CSS1604SS-MI

Package:

SOP-8L (150mil)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The CSS1604SS-MI is a 16Mbit (2M x 8-bit) Quad-SPI Pseudo-SRAM (PSRAM) from Cascadeteq, identical to the CSS1604SU-MI but in a standard SOP-8L (150mil) package. It operates at 1.62V to 3.6V with SPI/QPI interface, clock rates up to 133 MHz, and industrial temperature range (-40°C to +85°C).

Key Specifications

Density 16Mb (2M x 8 bits)
Supply Voltage 1.62V to 3.6V
Interface SPI / QPI
Max Clock Rate 133 MHz (wrapped), 84 MHz (linear)
Page Size 512 bytes
Burst Mode Configurable wrap: 16/32/64/512; Linear 512
Refresh Self-managed
Standby Current 35 µA typ @ 25°C
Operating Temp -40°C to +85°C
Package SOP-8L (150mil)
Part Status Active

Features

  • 16Mb SPI/QPI PSRAM in standard SOP-8L package
  • Self-managed refresh
  • Configurable wrap burst: 16/32/64/512 bytes
  • Programmable output drive: 50/100/200Ω
  • Software reset
  • Domestic alternative to imported PSRAM

Applications

  • MCU external PSRAM
  • IoT and wearable devices
  • Portable electronics
Product Introduction: CSS1604SS-MI Product Introduction

The CSS1604SS-MI is a 16Mbit (2M x 8-bit) Quad-SPI Pseudo-SRAM from Cascadeteq in a standard SOP-8L (150mil) package. Operating at 1.62V to 3.6V with SPI/QPI interfaces and clock rates up to 133 MHz, it features self-managed refresh, configurable wrap burst lengths, and programmable output drive strength. The industrial temperature grade (-40°C to +85°C) and standard SOP-8L package make it a drop-in domestic alternative for imported PSRAM chips.

Working Principle: CSS1604SS-MI Working Principle

Identical to CSS1604SU-MI. Serial pseudo-SRAM with internal DRAM array and self-refresh. SPI/QPI interface with configurable burst modes. Programmable output drive for signal integrity optimization.

Pin Description: CSS1604SS-MI Pin Definition and Functions
Pin Name Type Function
1 CE# Input Chip select
2 SO/SIO[1] I/O Data[1]
3 SIO[2] I/O Data[2]
4 VSS Power Ground
5 SI/SIO[0] I/O Data[0]
6 CLK Input Clock
7 SIO[3] I/O Data[3]
8 VDD Power Supply
Application Scenarios: In which products and applications is CSS1604SS-MI used
  • MCU external PSRAM in standard footprint
  • IoT device auxiliary memory
  • Wearable electronics
Alternative Models: What chips are recommended as replacements for CSS1604SS-MI
Manufacturer Part Number Package Notes
Cascadeteq CSS1604SU-MI USON-8L Ultra-compact variant
Lyontek LY68L3200SLIT SOP-8 32Mb imported alternative

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1