Opens in a new tab

DK2A-5V

5V DPDT signal relay, 2A/30VDC, 100mW coil, gold bifurcated contacts, DIP

5600

Effective Inventory

Image for reference only

Manufacturer Part:

DK2A-5V

Package:

DIP through-hole (20.4×7.5×15.0mm approx)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The Panasonic DK2A-5V is a 5V coil voltage DPDT (2-form-C) signal relay with 2A/30VDC contact rating. Ultra-sensitive 100mW coil power with gold-clad bifurcated contacts for reliable low-level signal switching.

Key Specifications

Coil Voltage 5 VDC
Contact Form DPDT (2-form-C)
Contact Rating 2A @ 30VDC / 0.3A @ 125VAC
Coil Power ~100 mW
Contact Resistance <50 mO max
Mechanical Life >10 million operations
Operating Temperature -40 to +70 C
Package Through-hole DIP type

Features

  • Ultra-sensitive 100mW coil power
  • DPDT 2-form-C contact arrangement
  • Gold-clad bifurcated contacts
  • Low contact resistance <50mO
  • UL/CSA approved

Applications

  • Telecom and datacom signal routing
  • Audio and video signal switching
  • Instrumentation range switching
  • Medical equipment signal isolation
Product Introduction: DK2A-5V Product Introduction

The DK2A-5V from Panasonic is a 5VDC coil DPDT (2-form-C) signal relay with ultra-sensitive 100mW coil power consumption. The gold-clad bifurcated cross-bar contacts ensure reliable switching of low-level signals (down to 10uA, 10mV) while also handling moderate power loads up to 2A at 30VDC. With >10 million mechanical operations life and <50mO contact resistance.

Working Principle: DK2A-5V Working Principle

The DK2A-5V uses an electromagnetic coil (5VDC, ~100mW) that generates a magnetic field when energized, attracting an armature that mechanically transfers the contacts from NC to NO position. The bifurcated (twin) contact design ensures reliable contact even if one contact point is contaminated. The gold cladding prevents oxide formation, enabling reliable low-level signal switching.

Pin Description: DK2A-5V Pin Definition and Functions
Pin Name Type Description
1,16 Coil+ Coil Coil positive terminal
2,9 NC1,NC2 Contact Normally closed contacts
4,11 NO1,NO2 Contact Normally open contacts
6,13 COM1,COM2 Contact Common wiper contacts
Application Scenarios: In which products and applications is DK2A-5V used
  • Audio preamp input source selection
  • Instrumentation range/gain switching
  • Telecom line and hook switch routing
  • Medical equipment patient-coupled switching
Alternative Models: What chips are recommended as replacements for DK2A-5V
Model Manufacturer Key Difference
DS2Y-S-DC5V Panasonic Similar 2-form-C, higher power
G6K-2F-DC5 Omron DPDT signal relay equivalent

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1