Opens in a new tab

DM8603EP

H-bridge DC motor driver, bidirectional, ~1A, integrated FETs, thermal/OCP protection

5216

Effective Inventory

Image for reference only

Manufacturer Part:

DM8603EP

Package:

DIP-8 / SSOP-16

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The DM8603EP is an H-bridge motor driver IC designed for bidirectional DC motor control. It integrates N-channel and P-channel MOSFETs in an H-bridge configuration with built-in protection features including thermal shutdown, over-current protection, and undervoltage lockout.

Key Specifications

  • Type: H-Bridge DC Motor Driver
  • Output Configuration: Full H-bridge (bipolar)
  • Supply Voltage: 2.5-12V typical range
  • Output Current: Up to 1A continuous
  • Peak Current: Up to 2A
  • On Resistance: Low R_DS(on) (integrated FETs)
  • Control: PHASE/ENABLE or IN1/IN2
  • Protection: Thermal shutdown, OCP, UVLO
  • Package: DIP-8 or SSOP-16 (varies)
  • Operating Temp: -20C to +85C typical

Features

  • Integrated H-bridge eliminates external MOSFETs
  • Bidirectional DC motor drive capability
  • Built-in thermal shutdown and over-current protection
  • Simple logic interface (PHASE/ENABLE or IN1/IN2)
  • Low on-resistance for efficient motor drive

Applications

  • DC motor drive in toys and consumer electronics
  • Vending machine dispensing mechanisms
  • Valve and actuator control
  • Small robot drive motors
  • Automotive mirror and seat adjustment
Product Introduction: DM8603EP Product Introduction

The DM8603EP is an integrated H-bridge DC motor driver with built-in MOSFETs and protection features for bidirectional motor control in consumer and industrial applications.

Working Principle: DM8603EP Working Principle

The H-bridge consists of four integrated MOSFET switches arranged in an H configuration. By controlling the ON/OFF states of the switch pairs, current flows through the motor in either direction or is braked. PWM on the enable pin provides speed control. Thermal and over-current protection automatically disable outputs during fault conditions.

Pin Description: DM8603EP Pin Definition and Functions
Pin Name Function
1 OUT1 Motor output A
2 OUT2 Motor output B
3 VDD Motor supply voltage
4 GND Ground
5 IN1/PHASE Direction control input
6 IN2/ENABLE Enable/speed control input
Application Scenarios: In which products and applications is DM8603EP used
  • DC motor drive in consumer electronics
  • Valve and actuator control
  • Small robot drive motor
  • Automotive mirror adjustment
Alternative Models: What chips are recommended as replacements for DM8603EP
Model Manufacturer Spec1 Spec2
DRV8833PWP TI 2A dual H-bridge HTSSOP-16
L9110S ASIC/Agam 800mA H-bridge SOP-8
TB6612FNG Toshiba 1.2A dual H-bridge SSOP-24

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1