Opens in a new tab

DMN62D0LFB-7

60V N-ch MOSFET, 320mA, 1.3Ω@4V, ESD-protected gate, X1-DFN1006 (0.6mm²), 0.45nC Qg

17922

Effective Inventory

Image for reference only

Manufacturer Part:

DMN62D0LFB-7

Package:

X1-DFN1006-3 (1.0 x 0.6 x 0.47 mm, 0.5mm pitch, bottom terminals)

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

The DMN62D0LFB-7 from Diodes Incorporated is a 60 V N-channel enhancement-mode small-signal MOSFET in a 3-pin X1-DFN1006-3 package (1.0 x 0.6 x 0.47 mm). Key specifications include 60 V drain-source voltage, 320 mA continuous drain current, 1.3 Ω maximum RDS(on) at VGS = 4 V, 1.0 V maximum threshold voltage, 0.45 nC typical gate charge at 4.5 V, 32 pF typical input capacitance, and 500 mW power dissipation. The device features ESD-protected gate and halogen-free construction. Operating temperature range is -55°C to +150°C (TJ). The -7 suffix denotes 3000-unit tape-and-reel.

Product Introduction: DMN62D0LFB-7 Product Introduction

The DMN62D0LFB-7 from Diodes Incorporated is a 60 V N-channel enhancement-mode MOSFET in the ultra-miniature X1-DFN1006-3 package, occupying only 0.6 mm² of board area with a 0.47 mm profile. This is one of the smallest MOSFET packages available, taking less than half the board space of SOT-723 and approximately one-third the space of SOT-23.

The 60 V drain-source voltage rating provides ample margin for 12 V, 24 V, and 48 V industrial and telecom applications. The 1.3 Ω maximum RDS(on) at VGS = 4 V is adequate for small-signal switching, load switching, and level translation where current does not exceed 320 mA. At VGS = 2.5 V, RDS(on) increases to 2.5 Ω maximum, still usable for lower-current 2.5 V logic-driven switches.

The ESD-protected gate eliminates the need for external gate protection, a practical benefit in high-volume consumer electronics manufacturing. The 0.45 nC typical gate charge enables fast switching with minimal drive power.

The X1-DFN1006-3 package uses bottom-side terminals (no leads), requiring controlled-accuracy PCB assembly. The package is MSL-1 rated (unlimited floor life), simplifying storage and handling. With RθJA of 258°C/W, the package limits continuous power dissipation to approximately 500 mW at 25°C ambient.

The DMN62D0LFB is part of Diodes’ next-generation MOSFET portfolio targeting space-constrained applications in smartphones, tablets, wearables, and IoT devices. The 60 V rating distinguishes it from typical small-signal MOSFETs (20-30 V), enabling use in higher-voltage industrial and telecom circuits.

Working Principle: DMN62D0LFB-7 Working Principle

**N-Channel Enhancement MOSFET:** The DMN62D0LFB is an N-channel enhancement-mode MOSFET. With VGS below the threshold (VGS(th) = 0.6-1.0 V), no channel forms and the device is off. When VGS exceeds VGS(th), an inversion layer forms under the gate oxide, creating a conductive channel between drain and source. The channel resistance (RDS(on)) decreases with increasing VGS.

**Trench MOSFET Structure:** The device uses trench gate technology where the gate electrode is formed in vertical trenches etched into the silicon. This maximizes channel width per unit area, achieving low RDS(on) in a small die. The 0.45 nC gate charge reflects the small gate area, enabling fast switching.

**ESD-Protected Gate:** Internal ESD protection structures (Zener clamp or back-to-back diodes) are integrated between gate and source. These structures shunt ESD energy away from the thin gate oxide during handling and assembly, allowing the device to survive ESD events without external protection components.

**DFN1006 Package Thermal Considerations:** The bottom-only terminals provide a low-inductance connection to the PCB, but the small die and lack of a thermal tab result in RθJA of 258°C/W. Thermal management relies on PCB copper pours under the drain terminal. For higher power applications, consider the larger X1-DFN1212-3 variant (DMN62D0LFD-7) with better thermal performance.

Pin Description: DMN62D0LFB-7 Pin Definition and Functions
Pin Name Type Description
1 Source P/G Source terminal; typically connected to ground for low-side switching; 320mA per channel; body diode cathode
2 Gate I Gate input; ESD-protected; VGS(th) 0.6-1.0V; VGS max ±20V; 0.45nC gate charge; drive from MCU GPIO
3 Drain O Drain terminal; 60V max; 320mA continuous; 1.3Ω RDS(on)@4V; connect to load; bottom-side terminal; solder to copper pad
Application Scenarios: In which products and applications is DMN62D0LFB-7 used
Application Description
Space-Constrained Load Switch Low-side load switch in smartphones and wearables; 0.6mm² footprint; MCU GPIO drives gate at 2.5-3.3V; 320mA adequate for LEDs, sensors, and small modules; ESD-protected gate survives handling
Industrial 24V Signal Switching 60V rating provides margin for 24V industrial signals; low-side switch for solenoid drivers and sensor interfaces; 1.3Ω RDS(on) at 100mA gives only 13mV drop; X1-DFN fits inside cable connectors
Logic-Level Voltage Translation Open-drain level shifting from 1.8V MCU to 5V bus; gate driven by 1.8V logic; pull-up on drain sets high level; 1.0V max VGS(th) ensures full enhancement at 1.8V
Alternative Models: What chips are recommended as replacements for DMN62D0LFB-7
Model Manufacturer Compatibility Key Difference
DMN62D0LFD-7 Diodes Inc Package Variant Same die in X1-DFN1212-3 (1.2×1.2mm); larger footprint with better thermal; 480mW vs 500mW; use when thermal or assembly requirements favor larger DFN
2N7002KVT1G onsemi Functional Equivalent 60V N-ch; 300mA; 2Ω@4.5V; SC-88; dual with common source; higher RDS(on); use as alternate source
BSS138-7-F Diodes Inc Competitive Alternative 50V N-ch; 220mA; 3.5Ω@5V; SOT-23; much larger package; lower voltage; use when DFN assembly not available

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1