Opens in a new tab

DP83848KSQ

10/100 Ethernet PHY, MII/RMII, Auto-MDIX, LQFP-48

5678

Effective Inventory

Image for reference only

Manufacturer Part:

DP83848KSQ

Package:

LQFP-48 (7.0 x 7.0 x 1.4 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The DP83848KSQ from Texas Instruments is a 10/100 Ethernet PHY transceiver with MII/RMII interface, IEEE 802.3u compliance, and LQFP-48 package.

Key Specifications

Type 10/100 Ethernet PHY Transceiver
Speed 10 Mbps and 100 Mbps
MAC Interface MII / RMII
Standards IEEE 802.3u, IEEE 802.3x
Auto-Negotiation Yes
Auto-MDIX Yes (auto crossover)
Supply Voltage 3.3V (I/O); 1.8V (core, internal regulator)
Current Consumption 130 mA (typical, 100Mbps active)
Package LQFP-48 (7 x 7 mm)
Operating Temperature -40C to +85C (I grade, K suffix)

Features

  • 10/100Mbps Ethernet PHY with auto-negotiation
  • MII and RMII MAC interface support
  • Auto-MDIX for automatic TX/RX crossover
  • IEEE 802.3u compliant
  • Integrated 1.8V core voltage regulator
  • 25MHz crystal or oscillator input

Applications

  • Embedded Ethernet connectivity
  • Industrial networking
  • IoT gateways
  • Network-enabled microcontroller systems
Product Introduction: DP83848KSQ Product Introduction

The DP83848KSQ from Texas Instruments (formerly National Semiconductor) is a robust 10/100 Mbps Ethernet physical layer transceiver designed for embedded networking applications. The device provides a complete PHY solution with integrated 100Base-TX and 10Base-T transceivers, supporting both MII (Media Independent Interface) and RMII (Reduced MII) connections to the MAC layer. Auto-negotiation automatically selects the best available speed and duplex mode. Auto-MDIX eliminates the need for crossover cables by automatically detecting and correcting TX/RX pair polarity. The integrated 1.8V core voltage regulator simplifies the power supply design to a single 3.3V rail. The device is compliant with IEEE 802.3u and IEEE 802.3x standards. The LQFP-48 package provides adequate pin spacing for manufacturing ease while maintaining a compact footprint.

Working Principle: DP83848KSQ Working Principle

The DP83848KSQ implements the physical layer of the Ethernet protocol stack. For 100Base-TX operation, the transmitter encodes 4-bit nibbles from the MII into 5-bit symbols using 4B/5B encoding, scrambles the data, and converts it to MLT-3 (Multi-Level Transmit) three-level signaling for transmission over the twisted pair. The receiver performs the reverse: equalization, MLT-3 decoding, descrambling, and 5B/4B decoding to recover the MII nibbles. For 10Base-T, Manchester encoding is used. The auto-negotiation protocol (IEEE 802.3u) exchanges capability information with the link partner using Fast Link Pulses (FLP) to determine the highest common speed and duplex mode. Auto-MDIX detects whether the cable is straight-through or crossover by measuring the received signal polarity on the TX pair and swapping the TX/RX pairs if needed. The internal PLL generates all required clock frequencies from the 25 MHz input reference.

Pin Description: DP83848KSQ Pin Definition and Functions
Pin Group Name Type Function
MAC TXD[0:3]/TXD[0:1] Input MII/RMII transmit data
MAC RXD[0:3]/RXD[0:1] Output MII/RMII receive data
MAC TX_CLK/TX_EN I/O MII clock/Transmit enable
MAC RX_CLK/RX_DV Output MII clock/Receive data valid
MAC MDC/MDIO I/O Management interface (SMI)
Line TXP/TXN Output Differential transmit pair
Line RXP/RXN Input Differential receive pair
Clock X1/X2 I/O 25 MHz crystal/oscillator
Power VDD/AVDD Power 3.3V supply
Application Scenarios: In which products and applications is DP83848KSQ used
  • STM32F4 Ethernet connectivity with RMII interface and Auto-MDIX
  • Industrial Modbus TCP gateway with 10/100Mbps PHY and auto-negotiation
  • IoT smart home hub with Ethernet backhaul and 130mA active current
  • Embedded web server with MII interface to custom FPGA MAC
Alternative Models: What chips are recommended as replacements for DP83848KSQ
Manufacturer Part Number Package Notes
TI DP83848CVV LQFP-48 Commercial temp version
Microchip KSZ8041NLIA QFN-32 10/100 PHY, smaller package
Realtek RTL8201F-VB-CG QFN-32 10/100 PHY, lower cost
Microchip KSZ9031RNXIA QFN-48 Gigabit PHY upgrade
TI DP83867IR QFN-48 Gigabit PHY, RGMII

Recommend Parts

MSP432P401RIPZR

Ultra-low-power Cortex-M4F MCU, 48MHz, 256KB Flash, 14-bit ADC, 850nA standby, 100-LQFP

Brand: TI

Package: 100-LQFP (14 x 14 x 1.4mm)

IN STOCK: 3750pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PTN78060WAH

4.5A positive-input buck-IT module, adjustable, SMD module

Brand: TI

Package: Module (34.3 x 19.3 x 8.2 mm)

IN STOCK: 4786pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC16F1526-I/PT

8-bit PIC16 MCU, 14KB Flash, 768B RAM, 30-ch 10-bit ADC, 10x CCP, 64-TQFP, XLP

Brand: MICROCHIP

Package: TQFP-64 (10.0 x 10.0 x 1.05 mm)

IN STOCK: 5600pcs

Cargo cycle: 3-7 Days

The minimum order is 1

R2A20178NP

8-channel 8-bit voltage output DAC, R-2R architecture, buffered rail-to-rail output, SPI interface up to 25MHz, 2.7-5.5V

Brand: Renesas

Package: 24-pin HWQFN (4x4x0.75mm)

IN STOCK: 6399pcs

Cargo cycle: 3-7 Days

The minimum order is 1

VS-40CPQ100-N3

Dual Schottky rectifier, common cathode, 2x20A, 100V, 0.61V VF, TO-247AC-3L, Vishay Q-series, 175 degC TJ, guard ring

Brand: VISHAY

Package: TO-247AC 3L (3-lead through-hole, 15.5mm width, tab for heatsink, common cathode configuration)

IN STOCK: 8950pcs

Cargo cycle: 3-7 Days

The minimum order is 1

BSC040N10NS5

OptiMOS 5 N-ch 100V 4mΩ 136A MOSFET, SuperSO8

Brand: infineon

Package: PG-TDSON-8 (SuperSO8, 5 x 6mm)

IN STOCK: 10509pcs

Cargo cycle: 3-7 Days

The minimum order is 1