Opens in a new tab

DRV8835DSSR

Dual H-bridge 1.5A, 0-11V, IN/IN & PH/EN modes, 305mOhm, WSON-12 3x2mm

3303

Effective Inventory

Image for reference only

Manufacturer Part:

DRV8835DSSR

Package:

WSON-12 (3.0 x 2.0 x 0.8 mm) with PowerPAD

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The DRV8835DSSR from Texas Instruments is a 12V dual H-bridge motor driver delivering up to 1.5A per bridge in a 12-pin WSON (3×2 mm) package. With two control interface modes (IN/IN and PHASE/ENABLE), 305 mOhm MOSFET RDS(ON), and 10 nA sleep current, it drives two DC motors or one stepper motor from a 0-11V motor supply and 2-7V logic supply.

Key Specifications

Full Bridges 2 (dual H-bridge)
Motor Supply (VM) 0V to 11V
Logic Supply (VCC) 2V to 7V
Peak Output Current 1.6A per bridge
RDS(ON) (HS+LS) 305 mOhm typ
Sleep Current 10 nA max
Control Interface IN/IN or PHASE/ENABLE (MODE pin)
Operating Temperature -40°C to +85°C
Package WSON-12 (3.0 x 2.0 x 0.8 mm)

Features

  • Dual H-bridge for two DC motors or one stepper motor
  • Two control modes: IN/IN and PHASE/ENABLE (MODE pin selectable)
  • 305 mOhm RDS(ON) for low power dissipation
  • 10 nA ultra-low sleep current
  • Internal charge pump for gate drive
  • Overcurrent, short-circuit, undervoltage, and thermal protection
  • Parallel bridge mode for 3A single motor drive

Applications

  • Camera lens and focus motor control
  • Toy and hobby robot motor drive
  • Medical device actuator control
  • Consumer electronics motor control
  • Precision stepper motor positioning
Product Introduction: DRV8835DSSR Product Introduction

The Texas Instruments DRV8835DSSR is a compact dual H-bridge motor driver designed for low-voltage and battery-powered motion control applications. It provides two independent H-bridges, each capable of driving up to 1.5A continuous current, suitable for driving two brushed DC motors or a single stepper motor. The device features two control interface modes selectable via the MODE pin: IN/IN mode provides individual control of each half-bridge output, while PHASE/ENABLE mode uses direction and enable inputs for simpler motor direction control. The low 305 mOhm MOSFET RDS(ON) minimizes power dissipation and voltage drop, critical for battery-powered applications. The 10 nA sleep current extends battery life in standby modes. Internal protection circuits include overcurrent protection (OCP), short-circuit protection, undervoltage lockout (UVLO), and thermal shutdown (TSD). The 3×2 mm WSON package with exposed thermal pad provides efficient heat dissipation in space-constrained designs.

Working Principle: DRV8835DSSR Working Principle

The DRV8835DSSR consists of two independent H-bridges, each containing four N-channel MOSFETs configured as a full-bridge. An internal charge pump generates the gate drive voltage above VM for the high-side MOSFETs, eliminating the need for external bootstrap capacitors. In IN/IN mode (MODE=low), each half-bridge output is controlled independently by two input pins (xIN1, xIN2), enabling coast, reverse, forward, and brake operations. In PHASE/ENABLE mode (MODE=high), one input controls the motor direction (xPHASE) and the other enables the bridge (xENABLE), simplifying the interface to a microcontroller. PWM speed control is achieved by pulsing the enable input (PHASE/ENABLE mode) or switching between forward/brake states (IN/IN mode). The overcurrent protection circuit senses the MOSFET current and limits it by regulating the gate voltage; if the overcurrent condition persists beyond the OCP timeout, all MOSFETs are disabled for approximately 1 ms before automatic retry. The two H-bridges can be paralleled for a single 3A motor drive by connecting AOUT1 to BOUT1 and AOUT2 to BOUT2 with corresponding inputs driven in parallel.

Pin Description: DRV8835DSSR Pin Definition and Functions
Pin Name Description
1 nSLEEP Sleep Mode Control (high=active, low=sleep)
2 AIN1/APHASE Channel A Input 1 / Phase (mode dependent)
3 AIN2/AENBL Channel A Input 2 / Enable (mode dependent)
4 BIN1/BPHASE Channel B Input 1 / Phase (mode dependent)
5 BIN2/BENBL Channel B Input 2 / Enable (mode dependent)
6 MODE Control Mode Select (low=IN/IN, high=PHASE/ENABLE)
7 AOUT1 Bridge A Output 1 (to motor)
8 AOUT2 Bridge A Output 2 (to motor)
9 BOUT1 Bridge B Output 1 (to motor)
10 BOUT2 Bridge B Output 2 (to motor)
11 GND Ground / PowerPAD
12 VCC Logic Supply (2-7V)
Application Scenarios: In which products and applications is DRV8835DSSR used
  • Camera Lens: Dual H-bridge for zoom and focus DC motors with PHASE/ENABLE mode simplifying MCU I/O requirements in DSLR and surveillance cameras
  • Toy Robot: 11V maximum motor supply and 10 nA sleep current for battery-powered toy robots driving two DC motors for differential drive locomotion
  • Stepper Motor: Two H-bridges driving a bipolar stepper motor with IN/IN mode for full-step and half-step microstepping sequences
  • Medical Actuator: Compact 3x2mm WSON package for portable medical device motor control with thermal shutdown protecting against stall conditions
  • Consumer Electronics: 1.5A per bridge for pan/tilt mechanisms, valve actuators, and door latch motors with dual control modes for design flexibility
Alternative Models: What chips are recommended as replacements for DRV8835DSSR
Model Brand Bridges Iout (A) Package
DRV8833DSSR TI 2 1.5 WSON-16
DRV8837DSQR TI 1 1.8 WSON-8
A4950ELJTR-T Allegro 1 2 MSOP-8
BD6211F-E2 ROHM 1 2 SOP-8
TB6612FNG Toshiba 2 1.2 SSOP-24

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1