Opens in a new tab

DRV8871DDAR

Single H-bridge 3.6A, 6.5-45V, integrated current sense, PWM, HSOIC-8 DDA

2222

Effective Inventory

Image for reference only

Manufacturer Part:

DRV8871DDAR

Package:

HSOIC-8 DDA with PowerPAD (4.9 x 6.0 x 1.55 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The DRV8871DDAR from Texas Instruments is a single H-bridge brushed DC motor driver with integrated current sensing in an 8-pin HSOIC (DDA) package. Operating from 6.5V to 45V, it delivers up to 3.6A peak output current with 565 mOhm RDS(ON), PWM speed control, and internal current regulation without an external sense resistor.

Key Specifications

Full Bridges 1 (single H-bridge)
Operating Voltage 6.5V to 45V
Peak Output Current 3.6A (3.7A abs max)
RDS(ON) (HS+LS) 565 mOhm typ
Sleep Current 10 µA typ
Control Interface PWM (2 inputs)
Current Regulation Internal (RILIM resistor sets threshold)
Operating Temperature -40°C to +125°C
Package HSOIC-8 (DDA) with PowerPAD (4.9 x 6.0 mm)

Features

  • Single H-bridge with 4 N-channel MOSFETs
  • 6.5V to 45V wide operating voltage range
  • 3.6A peak output current
  • Integrated current regulation without external sense resistor
  • PWM control via two logic inputs
  • UVLO, OCP, and thermal shutdown protection
  • HSOIC-8 package with exposed thermal pad

Applications

  • Printers and scanners
  • Home appliances and white goods
  • Industrial equipment actuators
  • Electronic locks and valves
  • Automotive auxiliary motors
Product Introduction: DRV8871DDAR Product Introduction

The Texas Instruments DRV8871DDAR is a single H-bridge brushed DC motor driver featuring integrated current sensing that eliminates the need for an external sense resistor. Operating from a wide 6.5V to 45V supply, it delivers up to 3.6A peak output current through four integrated N-channel MOSFETs with 565 mOhm typical RDS(ON). The device uses two logic inputs for PWM speed and direction control, with both inputs low entering a low-power sleep mode (10 µA). The internal current regulation circuit uses a low-power RILIM resistor to set the current trip threshold; when the motor current reaches this threshold, the device enters slow-decay mode for a fixed off-time (25 µs typical), providing precise current limiting without a high-power sense resistor or reference voltage. Protection features include undervoltage lockout (UVLO), overcurrent protection (OCP), and thermal shutdown (TSD) with automatic recovery.

Working Principle: DRV8871DDAR Working Principle

The DRV8871DDAR integrates four N-channel MOSFETs in an H-bridge configuration controlled by two logic inputs (IN1, IN2). The truth table is: IN1=1,IN2=0=forward; IN1=0,IN2=1=reverse; IN1=1,IN2=1=brake (low-side); IN1=0,IN2=0=sleep/coast. PWM speed control is achieved by switching between the drive state (forward/reverse) and the brake state at a duty cycle proportional to the desired speed. The integrated current regulation circuit measures the motor current through the MOSFETs internally (eliminating the external sense resistor). When the current exceeds the threshold set by the RILIM resistor (Itrip = K / RILIM), the device forces slow decay by enabling both low-side MOSFETs for a fixed off-time of 25 µs. After the off-time expires, the bridge re-enters the drive state, and the cycle repeats. This provides average current regulation without the power dissipation and cost of an external sense resistor. The overcurrent protection circuit disables all MOSFETs if the current exceeds the OCP threshold (approximately 6A), retrying after a fixed delay. Thermal shutdown activates at approximately 150°C junction temperature.

Pin Description: DRV8871DDAR Pin Definition and Functions
Pin Name Description
1 OUT1 H-Bridge Output 1 (to motor)
2 OUT1 H-Bridge Output 1 (to motor)
3 GND Ground / PowerPAD
4 IN2 Logic Input 2 (controls direction/brake)
5 IN1 Logic Input 1 (controls direction/brake)
6 RILIM Current Limit Set Resistor (to GND)
7 VM Motor Supply Voltage (6.5-45V)
8 OUT2 H-Bridge Output 2 (to motor)
Application Scenarios: In which products and applications is DRV8871DDAR used
  • Printer Motor: 24V to 45V operation driving stepper-replacement DC motors for paper feed and carriage mechanisms with integrated current regulation
  • Appliance Actuator: 12V/24V motor drive for dishwasher valves, washing machine pumps, and refrigerator damper actuators with 3.6A peak current
  • Electronic Lock: 12V solenoid/motor drive with RILIM current limiting protecting against mechanical stall without external sense resistor
  • Industrial Valve: 24V industrial motorized valve control with thermal shutdown and auto-retry protecting against sustained stall conditions
  • Automotive Auxiliary: 12V battery motor drive for seat adjusters, mirror actuators, and window lifters with 45V input tolerance for load-dump protection
Alternative Models: What chips are recommended as replacements for DRV8871DDAR
Model Brand Iout (A) Vin (V) Package
DRV8874DDAR TI 4.5 4.5-45 HSOIC-8
DRV8870DDAR TI 3.6 6.5-45 HSOIC-8
A4950ELJTR-T Allegro 2 8-40 MSOP-8
BTS6143D Infineon 7 5-40 TO-252-5
VNH5019ATR-E ST 30 5.5-24 PowerSSO-30

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1