Opens in a new tab

Home » Integrated Circuits ICs, Interface ICs » DS26LV32ATMX/NOPB

DS26LV32ATMX/NOPB

3.3V quad RS-422 receiver, 10Mbps, +/-7V CMR, failsafe, SOIC-16

9173

Effective Inventory

Image for reference only

Manufacturer Part:

DS26LV32ATMX/NOPB

Package:

SOIC-16 (9.9 x 6.0 x 1.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The DS26LV32ATMX/NOPB from Texas Instruments is a 3.3V quad differential line receiver compliant with TIA/EIA-422-B (RS-422) in a 16-pin SOIC package. With 10Mbps signaling rate, +/-7V common-mode range, and open-input failsafe, it provides robust differential signal reception for 3.3V digital communication systems.

Key Specifications

Protocol RS-422 / RS-485
Type Quad differential receiver (0/4)
Supply Voltage 3V to 3.6V (3.3V nominal)
Signaling Rate 10 Mbps
Common-Mode Range +/-7V @ VID=3V; +/-10V @ VID=0.2V
Receiver Hysteresis 35 mV
Receiver Skew 4 ns max
Supply Current 9 mA typical
ESD Tolerance >6.5 kV HBM
Failsafe Open input = HIGH output
Operating Temperature -40 to +85 C
Package SOIC-16

Features

  • 3.3V low-power CMOS quad receiver
  • Compliant with TIA/EIA-422-B (RS-422)
  • 10Mbps signaling rate
  • +/-7V wide common-mode range
  • Open-input failsafe (output goes HIGH)
  • 3-state output enable (EN/EN*)
  • 4ns max receiver skew
  • 32MHz toggle frequency
  • Interoperable with 5V RS-422 networks
  • Pin-compatible with DS26C32AT

Applications

  • 3.3V RS-422/RS-485 bus receivers
  • Industrial differential signal reception
  • Digital telecom line receivers
  • Point-to-point and multipoint communication
Product Introduction: DS26LV32ATMX/NOPB Product Introduction

The DS26LV32ATMX/NOPB from Texas Instruments is a 3.3V enhanced CMOS quad differential line receiver in a 16-pin SOIC package. The T suffix denotes the industrial temperature range version, M denotes SOIC-16 package, X indicates tape and reel, and /NOPB denotes lead-free packaging. Compliant with TIA/EIA-422-B (RS-422) and ITU-T V.11, the device features four independent differential receivers with +/-7V common-mode range at VID=3V and +/-10V at VID=0.2V. The open-input failsafe feature guarantees a HIGH output state when receiver inputs are left floating, preventing undefined bus states. The 3-state output enables (EN and EN*) allow multiple devices to share a common output bus. With 9mA typical supply current and 10Mbps signaling rate, it provides low-power 3.3V operation while maintaining interoperability with existing 5V RS-422 networks.

Working Principle: DS26LV32ATMX/NOPB Working Principle

The DS26LV32AT operates through three subsystems: (1) Differential Receiver: Each of the four receivers converts a differential input signal (A-B) to a single-ended TTL/LVCMOS output. The receiver detects signals as low as +/-200mV over the +/-10V common-mode range. The 35mV input hysteresis provides noise immunity for slowly transitioning signals. The differential Schmitt-trigger input architecture rejects common-mode noise effectively. (2) Failsafe Logic: When the differential inputs are left open (unconnected), the receiver output is guaranteed to be HIGH. This open-input failsafe is achieved by internal biasing that pulls the non-inverting input slightly above the inverting input when no external connection is present. This prevents undefined output states in partially populated bus configurations. (3) 3-State Control: The EN (active-high) and EN* (active-low) enable pins control all four receiver outputs simultaneously. When disabled, the outputs enter a high-impedance state, allowing multiple DS26LV32AT devices to share a common data bus without contention.

Pin Description: DS26LV32ATMX/NOPB Pin Definition and Functions
Pin Name Type Description
1 EN* Input Output enable (active low)
2,4,6,8 1A-4A Input Non-inverting differential inputs
3,5,7,9 1B-4B Input Inverting differential inputs
10,12,14,16 1Y-4Y Output Receiver outputs (3-state)
11 GND Power Ground
13 VCC Power 3.3V supply
15 EN Input Output enable (active high)
Application Scenarios: In which products and applications is DS26LV32ATMX/NOPB used
  • 3.3V industrial RS-422 bus receiver with +/-7V common-mode range and open-input failsafe
  • Differential backplane receiver with 10Mbps signaling and 4ns skew for clock distribution
  • Telecom line card with 3-state outputs for bus sharing and 6.5kV ESD protection
  • Mixed 3.3V/5V system with interoperability to existing 5V RS-422 transmitters
Alternative Models: What chips are recommended as replacements for DS26LV32ATMX/NOPB
Model Manufacturer Supply Rate Notes
DS34LV86TM/NOPB TI 3.3V 10Mbps Differential output version
AM26LV32CDR TI 3.3V 32Mbps Higher speed
SN65LVDS32DR TI 3.3V 400Mbps LVDS version
SP3485EN-L/TR MaxLinear 3.3V 10Mbps RS-485 transceiver

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1