Opens in a new tab

Home » Crystals & Oscillators » DT-26 32.768KHZ

DT-26 32.768KHZ

KDS DT-26 32.768kHz tuning fork quartz crystal, 2x6mm cylinder, 12.5pF, ±20ppm, ESR 40kΩ max, -40 to +85°C

3824

Effective Inventory

Image for reference only

Manufacturer Part:

DT-26 32.768KHZ

Package:

DT-26 Cylindrical Through-Hole (2.0 x 6.0 mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The DT-26 32.768KHZ from KDS (Daishinku Corporation) is a 32.768 kHz tuning fork quartz crystal in a cylindrical 2x6mm through-hole package. This is one of the most widely used timekeeping crystals in the electronics industry, providing the standard 32.768 kHz reference frequency for real-time clock (RTC) circuits in watches, clocks, and embedded systems.

Key Specifications

Manufacturer KDS (Daishinku Corporation)
Frequency 32.768 kHz
Crystal Type Tuning Fork (NT-cut / XY-cut)
Frequency Tolerance ±20 ppm at 25°C
Load Capacitance 12.5 pF
ESR (Series Resistance) 40 kOhm max (50 kOhm per some grades)
Drive Level 1.0 µW max
Aging (1st year) < ±3 ppm
Turnover Temperature 25 ± 5°C
Parabolic Coefficient -0.04 ppm/°C² max
Operating Temperature -40°C to +85°C
Package DT-26 Cylindrical (2.0 x 6.0 mm), 2-pin through-hole
RoHS Compliant

Features

  • 32.768 kHz tuning fork quartz crystal
  • Industry-standard DT-26 cylindrical 2x6mm package
  • 12.5 pF load capacitance matching most RTC ICs
  • ±20 ppm frequency tolerance at 25°C
  • Low ESR 40 kOhm max
  • 1 µW max drive level
  • Parabolic temperature characteristic with turnover at 25°C
  • Widely used in watches and timekeeping circuits

Applications

  • Real-time clock (RTC) modules
  • Watch and clock circuits
  • Calendar functions in microcontrollers
  • Battery-backed time reference
  • Power metering timekeeping
  • Automotive body electronics
  • Industrial timing systems
Product Introduction: DT-26 32.768KHZ Product Introduction

The DT-26 32.768KHZ from KDS (Daishinku Corporation) is a 32.768 kHz tuning fork quartz crystal in the industry-standard DT-26 cylindrical 2x6mm through-hole package. The 32.768 kHz frequency is the universal timekeeping reference (2^15 = 32768), allowing simple binary division to generate 1 Hz for real-time clock circuits. KDS is one of the world’s largest manufacturers of 32.768 kHz crystals, with the DT-26 being one of their most widely produced products used in watches, RTC modules, and embedded systems worldwide. The ±20 ppm frequency tolerance at 25°C translates to approximately ±1.7 seconds per day worst-case, while the typical performance is significantly better at around ±0.5 seconds per day.

Working Principle: DT-26 32.768KHZ Working Principle

The DT-26 32.768KHZ operates as a tuning fork quartz crystal using the X-Y flexural vibration mode of a bar-shaped quartz element. Unlike AT-cut crystals that use thickness shear mode for MHz frequencies, tuning fork crystals use a cantilever flexural mode where two tines vibrate in opposite directions, producing the 32.768 kHz frequency. The NT-cut orientation produces a parabolic frequency-temperature curve described by Δf = TC × (TA – TTP)² ppm, where TC is approximately -0.04 ppm/°C² and TTP (turnover temperature) is 25°C. The very low drive level of 1 µW maximum is critical because excessive drive power can fracture the thin tuning fork tines. The high ESR of 40 kOhm is characteristic of tuning fork crystals and requires careful oscillator circuit design with adequate gain margin (> 3x typical).

Pin Description: DT-26 32.768KHZ Pin Definition and Functions
Pin Name Type Function
1 Crystal Terminal 1 Passive One terminal of the tuning fork resonator; connects to oscillator input
2 Crystal Terminal 2 Passive Other terminal of the tuning fork resonator; connects to oscillator output
Application Scenarios: In which products and applications is DT-26 32.768KHZ used
  • Real-Time Clock: Provides 32.768 kHz reference for RTC ICs like DS3231, MCP7940N, and PCF8563 with 12.5pF load capacitance matching most RTC designs.
  • Watch Circuits: Time reference for analog and digital watches including Casio, Seiko, and other major brands.
  • MCU RTC: Drives on-chip RTC oscillator of microcontrollers for calendar and alarm functions in battery-backed modes.
  • Power Metering: Time reference for electricity, gas, and water meters requiring long-term time accuracy.
Alternative Models: What chips are recommended as replacements for DT-26 32.768KHZ
Manufacturer Part Number Package Frequency Notes
Epson MC-306 32.768K-E 8×3.8mm 32.768 kHz SMD alternative
Seiko SP-T2A-F32.768kHz 2x6mm 32.768 kHz Pin-compatible cylinder
NDK NX2012SA 32.768kHz 2.0×1.2mm 32.768 kHz Compact 2012 SMD
Murata XRCGB32K768K16R8-G 2.0×1.2mm 32.768 kHz Compact SMD alternative

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1