Opens in a new tab

EC103DAP

SCR 1A 400V, 200uA gate, TO-92, -40 to 125C

12056

Effective Inventory

Image for reference only

Manufacturer Part:

EC103DAP

Package:

TO-92 (5.2×5.2mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The EC103DAP is a 1A, 400V sensitive gate SCR. TO-92 for low-power AC switching, crowbar, and alarm circuits.

Key Specifications

Type Sensitive Gate SCR
IT(RMS) 1 A
VDRM/VRRM 400 V
IGT 200 uA max (sensitive gate)
IH 5 mA max
VTM 1.6V max @ 1A
Operating Temp -40 to +125C
Package TO-92 (5.2×5.2mm)

Features

  • 1A low-current SCR
  • 400V blocking voltage
  • 200uA ultra-sensitive gate
  • TO-92 through-hole
  • For low-power AC switching
  • RoHS compliant

Applications

  • Overvoltage crowbar
  • Alarm bell driver
  • Small solenoid driver
  • Low-power lamp dimming
Product Introduction: EC103DAP Product Introduction

The EC103DAP is a 1A 400V sensitive gate SCR in TO-92 package. 200uA ultra-sensitive gate trigger current for direct CMOS logic drive without amplification. 1A RMS current for low-power AC switching. For overvoltage crowbar protection (triggers SCR to blow fuse on OVP), alarm bell driving, small solenoid control, and low-power lamp dimming.

Working Principle: EC103DAP Working Principle

PNPN four-layer structure latches on when gate current exceeds 200uA. The ultra-sensitive gate allows direct connection to CMOS microcontroller outputs (4mA sink/source >> 200uA gate trigger). Once latched, the SCR conducts until anode current drops below 5mA holding current. In AC circuits, self-commutation occurs at zero crossing. The crowbar application connects the SCR across the supply; on overvoltage, the gate is triggered, the SCR shorts the supply rail, and the fuse blows, protecting the load.

Pin Description: EC103DAP Pin Definition and Functions
Pin Name Description
1 K Cathode
2 A Anode (case)
3 G Gate
Application Scenarios: In which products and applications is EC103DAP used
  • OVP crowbar
  • Alarm driver
  • Solenoid driver
Alternative Models: What chips are recommended as replacements for EC103DAP
Model Manufacturer Key Difference

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1