Opens in a new tab

EP3C25F256I7N

Cyclone III FPGA, 24624 LE, 594Kb RAM, 66 multipliers, 4 PLLs, industrial -40~100°C, 256-FBGA, Altera EP3C25F256I7N

950

Effective Inventory

Image for reference only

Manufacturer Part:

EP3C25F256I7N

Package:

256-Pin FineLine BGA (FBGA256, 17mm × 17mm), surface mount

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The EP3C25F256I7N is a field-programmable gate array from Altera (now Intel) Cyclone® III family, offering enhanced logic density, memory, and DSP capabilities in a low-power, low-cost architecture. Housed in a 256-pin FineLine BGA package, this industrial-grade device features 24,624 logic elements (LEs), 66 M9K RAM blocks totaling 594 Kbits of embedded memory, 66 embedded 18×18 multipliers, 4 phase-locked loops (PLLs), 20 global clock networks, and up to 182 user I/O pins. Built on TSMC’s 65nm low-power process technology with a 1.2V core, Cyclone III devices deliver significantly lower static power compared to previous generations. The -7 speed grade and industrial temperature range (-40°C to +100°C) make this device suitable for demanding industrial, automotive, and communications applications requiring reliable operation over wide temperature ranges.

Key Specifications

Parameter Value
Manufacturer Altera (Intel® PSG)
Part Number EP3C25F256I7N
Product Family Cyclone® III
Product Type Field Programmable Gate Array (FPGA)
Logic Elements (LEs) 24,624
Logic Array Blocks (LABs) 1,539 (16 LEs per LAB)
Embedded Memory (M9K Blocks) 66 blocks (9,216 bits each)
Total RAM Bits 594 Kbits (608,256 bits)
Embedded Multipliers 66 (18 × 18-bit multipliers)
Phase-Locked Loops (PLLs) 4
Global Clock Networks 20
Maximum User I/O Pins Up to 182 (256-pin FBGA)
Core Voltage 1.2 V (nominal)
I/O Voltage Support 3.3 V, 2.5 V, 1.8 V, 1.5 V, 1.2 V
I/O Standards LVTTL, LVCMOS, SSTL, HSTL, PCI, LVDS, etc.
Differential I/O Channels Up to 72 channels (LVDS)
External Memory Support DDR/DDR2 SDRAM, SDR SDRAM, QDRII SRAM
DDR2 Interface Performance Up to 333 Mbps
Configuration Modes AS (Active Serial), AP, PS, FPP, JTAG
Speed Grade -7 (I7 = Industrial, speed 7)
Operating Temperature -40°C ~ +100°C (industrial, I grade)
Package / Case 256-Pin FineLine BGA (FBGA256, 17mm × 17mm)
Mounting Type Surface Mount
Process Technology 65 nm TSMC low-power
RoHS RoHS Compliant
MSL Level MSL 3 (168 hours)
Product Status Mature / Active

Features

  • Low-cost, low-power Cyclone III FPGA family (65nm)
  • 24,624 logic elements (LEs) for custom logic
  • 594 Kbits of embedded SRAM (66 × M9K blocks)
  • 66 embedded 18×18 multipliers for DSP
  • 4 phase-locked loops (PLLs) for clock synthesis
  • 20 global clock networks
  • Up to 182 user I/O pins (256-FBGA)
  • Single-ended I/O: LVTTL, LVCMOS 3.3/2.5/1.8/1.5/1.2V
  • Differential I/O: LVDS, mini-LVDS, RSDS, LVPECL, HSTL
  • External memory: DDR2, DDR, SDR SDRAM, QDRII
  • DDR2 support up to 333 Mbps
  • Nios II soft embedded processor support
  • Extensive IP core library
  • 1.2V core voltage, low static power
  • Multiple I/O banks with independent voltages
  • 65 nm TSMC low-power process
  • Configuration: serial flash, parallel flash, JTAG
  • Industrial temperature range: -40°C ~ +100°C
  • 256-pin FineLine BGA package
  • RoHS compliant, MSL 3
  • High value for high-volume applications

Applications

  • Industrial control and automation
  • Automotive electronics
  • Video processing and displays
  • Communications and networking
  • Motor control and drives
  • Medical equipment
  • Nios II soft processor systems
  • Image and signal processing
  • Test and measurement
  • Consumer electronics
Product Introduction: EP3C25F256I7N Product Introduction

The EP3C25F256I7N is an industrial-grade FPGA from Altera’s Cyclone III family — the third generation of low-cost Cyclone FPGAs, built on TSMC’s 65nm low-power process technology. Compared to Cyclone II, Cyclone III devices offer roughly 2-3x more logic per equivalent package, significantly lower static power (due to the smaller process geometry), enhanced DSP capabilities, and improved I/O performance at similar price points. The EP3C25 variant is a mid-density member with 24,624 logic elements, striking a balance between resource count and cost for medium-complexity designs. The ‘I7’ suffix indicates industrial temperature range (-40°C to +100°C junction) with -7 speed grade, making this device suitable for industrial and automotive applications that require reliable operation over wide temperature extremes. The Cyclone III logic architecture is based on a refined logic element (LE) with a 4-input look-up table and a programmable register, organized into 1,539 logic array blocks (LABs) of 16 LEs each. The memory system includes 66 M9K RAM blocks (each 9,216 bits), totaling 594 Kbits of embedded memory that can be configured as single-port, dual-port, or FIFO buffers. For DSP applications, 66 embedded 18×18-bit multipliers provide dedicated hardware multiplication resources — enough for high-performance FIR filters, FFT accelerators, and other signal processing functions. Four phase-locked loops (PLLs) provide flexible clock synthesis with frequency synthesis, phase shifting, and spread-spectrum clocking support. Twenty global clock networks distribute clock signals with low skew across the device. The 256-pin FBGA package provides up to 182 user I/O pins organized into multiple independent I/O banks, supporting a comprehensive set of single-ended and differential I/O standards including LVDS at up to 840 Mbps. External memory interfaces support DDR2 SDRAM at up to 333 Mbps, plus DDR, SDR SDRAM, and QDRII SRAM. The device is fully supported by Altera’s Quartus II development software and the extensive library of Altera and third-party IP cores including the Nios II soft processor, DDR memory controllers, Ethernet MACs, and various DSP and interface functions. With its combination of logic density, DSP capability, low power, industrial temperature rating, and low cost, the EP3C25F256I7N is well-suited for industrial automation, automotive, video processing, and communications applications.

Working Principle: EP3C25F256I7N Working Principle

The Cyclone III FPGA is a SRAM-based programmable logic device whose functionality is determined by configuration data stored in internal SRAM cells. When power is first applied, the FPGA has no defined function and must be configured by loading a configuration bitstream. Configuration can occur through several modes: Active Serial (AS) mode where the FPGA loads data from a serial configuration flash device; Active Parallel (AP) mode for parallel flash; Passive Serial (PS) or Fast Passive Parallel (FPP) mode where an external controller loads the configuration data; or via the JTAG interface for in-system programming and debugging. Once configured, the FPGA implements the user’s logic design. The core logic building block is the logic element (LE), containing a 4-input look-up table (LUT) for implementing combinational logic functions, a programmable flip-flop for sequential circuits, carry-in/carry-out chains for arithmetic operations, and register chain connections. LEs are organized into 16-LE groups called logic array blocks (LABs), with each LAB having dedicated local routing resources for fast intra-LAB connections. The M9K memory blocks are 9,216-bit true dual-port SRAM blocks that can be configured in various depth and width combinations, supporting single-port, simple dual-port, true dual-port, shift register, ROM, and FIFO modes. The embedded multiplier blocks provide 18×18-bit signed/unsigned multiplication in hardware, each also configurable as two independent 9×9 multipliers for lower-precision applications. These multiplier blocks significantly enhance DSP performance by offloading multiplication from the general-purpose logic fabric. The four PLLs provide advanced clock management including frequency multiplication and division, phase shifting with fine resolution, spread-spectrum clocking for EMI reduction, and clock switchover for redundant clock sources. Twenty global clock networks with multiple clock control blocks provide flexible clock distribution with low skew across the entire device. The I/O structure features configurable I/O elements (IOEs) per pin, with each I/O bank supporting independent VCCIO voltages for interfacing with different logic families. Differential I/O support includes LVDS transmitters and receivers for high-speed serial data transfer. The routing architecture uses a hierarchical structure with local, row, column, and global routing channels of varying lengths to connect all device resources efficiently. When implementing a design, Quartus II synthesis converts the user’s HDL description (Verilog/VHDL) into a netlist of logic elements and other resources. The fitter then performs placement (assigning logic to specific physical locations) and routing (configuring the interconnect resources), followed by timing analysis to verify that the design meets its speed requirements. The resulting configuration bitstream is then used to program the device.

Pin Description: EP3C25F256I7N Pin Definition and Functions

The EP3C25F256I7N is available in a 256-pin FineLine BGA package (17mm × 17mm). Major pin groups:

Pin Group Approx. Count Description
Power Supply Pins ~55 VCCINT (1.2V core), VCCIO (I/O banks), VCCA_PLL (PLL analog)
Ground Pins ~45 GND (multiple pins for power distribution)
User I/O Pins Up to 182 General-purpose I/O, organized into 8 I/O banks
I/O Banks 8 banks Banks 1A, 1B (left); 2A, 2B (right); 3A, 3B (top); 4A, 4B (bottom)
Dedicated Clock Inputs 16 CLK[0..15] (dual-purpose with general I/O)
PLL Clock Outputs 8 PLL1_OUT[0,1], PLL2_OUT[0,1], etc.
Differential Channels ~36 pairs LVDS differential I/O pairs (left and right banks)
Configuration Pins ~12 DCLK, DATA0, nCONFIG, nSTATUS, CONF_DONE, nCE, nCE0, nCSO, ASDO, CRC_ERROR
JTAG Pins 4 TCK, TMS, TDI, TDO (JTAG test interface)
Test Pins 2 TEST_IN, TEST_OUT (factory test only)
Configuration Flash ~4 Serial flash interface pins (AS mode)

Note: Exact I/O count and assignment depends on package and configuration. Refer to the official Cyclone III EP3C25 datasheet, pin list files, and Quartus II pin planner for complete pin assignments, I/O bank configurations, and electrical specifications.

Application Scenarios: In which products and applications is EP3C25F256I7N used
  • Industrial Control & Automation: Used in PLCs, industrial sensor interfaces, motion controllers, and factory automation systems for real-time signal processing, custom control logic, and industrial network protocol implementation, with the industrial temperature range ensuring reliable operation in harsh environments
  • Automotive Electronics: Deployed in automotive infotainment, ADAS pre-processing, and body electronics (with AEC-Q100 qualified variants), leveraging the -40°C to +100°C temperature range for under-hood and cabin applications
  • Video Processing & Displays: Used in video scalers, format converters, video wall controllers, display timing controllers, and image processing pipelines where parallel pixel processing and high-speed I/O are required
  • Communications & Networking: Found in network switches, wireless backhaul equipment, protocol converters, and telecom access equipment for packet processing, line interface functions, and protocol bridging
  • Motor Control & Drives: Used in industrial servo drives, VFDs, and robotics for high-speed current loop implementation, multi-channel PWM generation, encoder interfaces, and FOC algorithm acceleration
  • Medical Equipment: Deployed in medical imaging front-ends, patient monitors, and diagnostic equipment for signal processing, data acquisition, and custom interface logic, where reliability and temperature stability are critical
  • Nios II Embedded Systems: Implements complete Nios II soft processor systems with custom hardware accelerators, memory interfaces, and peripherals — providing a flexible, software-programmable platform with hardware acceleration capabilities
  • Test & Measurement: Used in oscilloscopes, logic analyzers, data acquisition systems, and custom test equipment for high-speed data capture, signal processing, and custom trigger logic implementation
Alternative Models: What chips are recommended as replacements for EP3C25F256I7N
Part Number Manufacturer LEs RAM (Kb) Multipliers Temp Range
EP3C25F256I7N Altera/Intel 24,624 594 66 -40~100°C
EP3C25F256C8N Altera/Intel 24,624 594 66 0~85°C
EP3C16F256I7N Altera/Intel 15,408 516 56 -40~100°C
EP3C40F324I7N Altera/Intel 39,600 1,134 116 -40~100°C
EP4CE22F17C6N Altera/Intel 22,320 608 66 0~85°C (Cyclone IV)
XC6SLX25 Xilinx 24,051 552 52 -40~100°C

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4019PBF

150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 2409pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1