Opens in a new tab

Home » Integrated Circuits ICs » EPC2LC20N

EPC2LC20N

EPC2LC20N – FPGA Configuration Device

9500

Effective Inventory

Image for reference only

Manufacturer Part:

EPC2LC20N

Package:

PLCC-20

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The EPC2LC20N is an Intel/Altera serial configuration device for FPGAs. 2Mbit density for storing configuration data for APEX, FLEX, and Cyclone FPGAs. Active Serial interface for single-FPGA configuration. JTAG in-system programmable. PLCC-20 package.

Key Specifications

Type Serial Configuration Device (EPC2)
Density 1,705,984 bits (2 Mbit)
Interface Active Serial (AS)
Clock Frequency Up to 20 MHz (DCLK)
Programming JTAG ISP
Supply Voltage 3.3V
Operating Temp 0 to +70C (Commercial)
Package PLCC-20

Working Principle

The EPC2 stores FPGA configuration bitstreams in non-volatile flash memory. On power-up, the EPC2 automatically clocks out the configuration data to the FPGA via the Active Serial (AS) interface using DCLK and DATA0 signals. The nCS pin selects the device; nCONF_DONE signals successful configuration. The EPC2 supports page mode for storing multiple configuration files. JTAG interface allows in-system programming of the flash memory without removing the device.

Applications

  • FPGA configuration storage
  • Active Serial programming
  • Multi-page configurations
Product Introduction: EPC2LC20N Product Introduction

The EPC2LC20N is an Intel/Altera serial configuration device for FPGAs. 2Mbit density for storing configuration data for APEX, FLEX, and Cyclone FPGAs. Active Serial interface for single-FPGA configuration. JTAG in-system programmable. PLCC-20 package.

Working Principle: EPC2LC20N Working Principle

The EPC2 stores FPGA configuration bitstreams in non-volatile flash memory. On power-up, the EPC2 automatically clocks out the configuration data to the FPGA via the Active Serial (AS) interface using DCLK and DATA0 signals. The nCS pin selects the device; nCONF_DONE signals successful configuration. The EPC2 supports page mode for storing multiple configuration files. JTAG interface allows in-system programming of the flash memory without removing the device.

Pin Description: EPC2LC20N Pin Definition and Functions
Pin Name Desc
DCLK Clock Serial clock output
DATA0 Data Serial data output
nCS Chip Select Active low select
JTAG TCK/TDI/TDO/TMS Programming
Application Scenarios: In which products and applications is EPC2LC20N used
  • FPGA configuration storage
  • Active Serial programming
  • Multi-page configurations
Alternative Models: What chips are recommended as replacements for EPC2LC20N
Model Vendor Diff
EPC4 Intel 4 Mbit

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1