Opens in a new tab

Home » Audio ICs, Integrated Circuits ICs » EPM1270T144C3N

EPM1270T144C3N

MAX II CPLD, 1,270 macrocells, 8Kbit UFM, instant-on flash, 1.8V/2.5V/3.3V I/O

10562

Effective Inventory

Image for reference only

Manufacturer Part:

EPM1270T144C3N

Package:

144-pin TQFP

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

EPM1270T144C3N is an Intel/Altera MAX II EPM1270 CPLD, 1,270 macrocells, 144-pin TQFP, commercial grade, speed grade 3.

Key Specifications

Type MAX II CPLD
Macrocells 1,270
UFM 8,192 bits user flash
Package 144-pin TQFP (T144)
Speed Grade C3
Series EPM1270

Features

  • 1,270 macrocell MAX II CPLD
  • 8K bits user flash memory (UFM)
  • In-system programmable
  • 144-pin TQFP package

Applications

Refer to manufacturer datasheet for detailed application information and design guidelines.

Product Introduction: EPM1270T144C3N Product Introduction

EPM1270T144C3N is an Intel/Altera MAX II EPM1270 CPLD, 1,270 macrocells, 144-pin TQFP, commercial grade, speed grade 3.

Working Principle: EPM1270T144C3N Working Principle

The EPM1270T144C3N is a MAX II CPLD from Intel/Altera. It uses a macrocell-based architecture with programmable AND/OR logic arrays and flip-flops. The Macrocells are grouped into Logic Array Blocks (LABs) interconnected by a programmable routing matrix. User Flash Memory (UFM) provides non-volatile storage. Configuration is instant-on from on-chip flash, enabling the device to be operational immediately after power-up without external configuration. I/O elements support multiple standards and feature programmable drive strength and slew rate.

Pin Description: EPM1270T144C3N Pin Definition and Functions
Pin Group Name Description
I/O GPIO Programmable I/O with multiple drive strength settings
Power VCC, VCCIO Core and I/O supply (1.8V/2.5V/3.3V)
Ground GND Ground reference
JTAG TDI, TDO, TMS, TCK IEEE 1149.1 JTAG boundary scan and ISP
Clock CLK Global clock input
Application Scenarios: In which products and applications is EPM1270T144C3N used
  • Address decoding and glue logic
  • Power-on reset and sequencing control
  • I2C/SPI bus bridging
  • State machine implementation
  • Board-level interface adaptation
Alternative Models: What chips are recommended as replacements for EPM1270T144C3N
Model Manufacturer Key Difference
XC2C128 Xilinx CoolRunner-II, 128 macrocell, ultra-low power
MACHXO2 Lattice 6K LUT CPLD with embedded flash

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1