Opens in a new tab

ERA-2AEB910X

Thin film chip resistor, 91 ohm, 0.1%, 0.063W, 0402, AEC-Q200, ERA-2A series, Panasonic

8765

Effective Inventory

Image for reference only

Manufacturer Part:

ERA-2AEB910X

Package:

0402 (1005 Metric) 1.0 x 0.5 x 0.35 mm

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The Panasonic ERA-2AEB910X is a 91 ohm, 0.063W high-reliability thin film chip resistor in a 0402 (1005 metric) package. Featuring plus/minus 0.1% tolerance, plus/minus 25 ppm/C temperature coefficient, and AEC-Q200 qualification, it delivers exceptional precision and stability for automotive and industrial instrumentation applications.

Key Specifications

Resistance 91 ohm
Tolerance plus/minus 0.1%
Power Rating 0.063 W (1/16 W)
Temperature Coefficient plus/minus 25 ppm/C
Max Voltage 50 V
Operating Temperature -55C to +155C
Package 0402 (1.0 x 0.5 x 0.35 mm)
Qualification AEC-Q200

Features

  • Ultra-precise plus/minus 0.1% tolerance for critical analog circuits
  • Low TCR of plus/minus 25 ppm/C ensures stability across temperature
  • Thin film technology for low noise and excellent linearity
  • AEC-Q200 qualified for automotive applications
  • Compact 0402 package for high-density designs
  • High reliability: stable at high temperature and humidity (85C/85%RH)
  • IEC 60115-8, JIS C 5201-8 compliant
  • RoHS compliant

Applications

  • Precision current sensing and measurement circuits
  • Op-amp gain and feedback networks in instrumentation
  • ADC/DAC reference voltage dividers
  • Automotive sensor signal conditioning
  • Precision voltage reference circuits
Product Introduction: ERA-2AEB910X Product Introduction

The Panasonic ERA-2AEB910X is a 91 ohm high-reliability thin film chip resistor from the ERA-2A series, housed in a compact 0402 (1005 metric) package. With plus/minus 0.1% tolerance and plus/minus 25 ppm/C temperature coefficient, it delivers exceptional precision for critical analog and measurement circuits. The thin film resistive element (typically nichrome or tantalum nitride) is sputtered onto an alumina substrate, providing low current noise, excellent linearity, and superior long-term stability compared to thick film alternatives. The device is AEC-Q200 qualified, meeting automotive reliability standards including operation at 85C/85%RH under rated load. It complies with IEC 60115-8, JIS C 5201-8, and JEITA RC-2133C standards.

Working Principle: ERA-2AEB910X Working Principle

The ERA-2AEB910X uses a thin film resistive element created by sputtering a nichrome (NiCr) or tantalum nitride (TaN) alloy onto a polished alumina substrate in a vacuum chamber. The film thickness (typically 50-200 nm) and composition determine the sheet resistance. The 91 ohm value is achieved by photolithographically patterning the film into a specific geometry and then laser-trimming to the precise target value with plus/minus 0.1% accuracy. Thin film resistors exhibit lower current noise than thick film types because the continuous metallic film has no particle-to-particle contact resistance. The plus/minus 25 ppm/C TCR results from the intrinsic temperature behavior of the NiCr alloy, which is significantly lower than thick film ruthenium oxide elements (typically plus/minus 100 ppm/C). The film is protected by a passivation layer (SiO2 or polyimide) to prevent oxidation and mechanical damage.

Pin Description: ERA-2AEB910X Pin Definition and Functions
Pin Name Type Function
1 Terminal 1 Terminal Resistor terminal — solder pad on PCB
2 Terminal 2 Terminal Resistor terminal — solder pad on PCB
Application Scenarios: In which products and applications is ERA-2AEB910X used
  • Precision current measurement shunt in battery monitoring systems
  • Op-amp feedback resistor in precision instrumentation amplifiers
  • ADC reference voltage divider for 16-bit measurement accuracy
  • Automotive sensor bridge completion resistor
  • Precision voltage reference load resistor in 0.1% accurate circuits
Alternative Models: What chips are recommended as replacements for ERA-2AEB910X
Manufacturer Part Number Package Notes
Panasonic ERA2AEB910X 0402 Same part without hyphen
Vishay Y14880R91000T9R 0402 Precision thin film equivalent
Susumu RG1005P-910-B-T5 0402 Thin film 91 ohm 0.1%
Yageo RT0402BRD0791RL 0402 Thin film 91 ohm 0.1%
Bourns CHP0402-91RLF 0402 Precision thin film alternative

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1