Opens in a new tab

Home » Passive Components, Resistors » ERA-6AEB105V

ERA-6AEB105V

Panasonic ERA series high precision thin film resistor, 1MΩ ±0.5%, 0.125W, ±50ppm/°C TCR, anti-sulfur, -55°C to +155°C

4188

Effective Inventory

Image for reference only

Manufacturer Part:

ERA-6AEB105V

Package:

0603 (1608 Metric)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ERA-6AEB105V is a high-precision thin film chip resistor from Panasonic’s ERA series, offering 1MΩ resistance with ±0.5% tolerance in a 0603 (1608 Metric) surface-mount package. Featuring a low ±50ppm/°C temperature coefficient and 0.125W power rating, this resistor delivers exceptional long-term stability and low noise performance, making it ideal for precision analog circuits, medical equipment, industrial measurement, and automotive electronics where accuracy and reliability are critical.

Key Specifications

Resistance 1MΩ (1,000,000Ω)
Tolerance ±0.5%
Power Rating 0.125W (1/8W)
Rated Voltage 75V
Overload Voltage 150V
Technology Thin Film (Sputtered)
Temperature Coefficient (TCR) ±50ppm/°C
Package / Case 0603 (1608 Metric)
Dimensions (L × W × H) 1.60mm × 0.80mm × 0.45mm
Operating Temperature -55°C to +155°C
Moisture Sensitivity MSL 1 (Unlimited)
Termination Anti-sulfur termination, Sn-plated
Packaging 7″ Reel, Paper Tape (5,000 pcs/reel)
Standards RoHS Compliant, AEC-Q200 Compatible
Series ERA Series (High Precision Thin Film)

Features

  • High precision thin film technology with ±0.5% tight tolerance
  • Low temperature coefficient ±50ppm/°C for stable resistance over temperature
  • Excellent long-term stability and reliability
  • Low electrical noise for precision signal processing
  • Anti-sulfur termination design for harsh environment resistance
  • Wide operating temperature range: -55°C to +155°C
  • 0.125W power rating with 75V working voltage
  • MSL Level 1 — no preconditioning required
  • RoHS compliant; lead-free and halogen-free
  • Panasonic quality and manufacturing precision

Applications

  • Precision analog circuits and operational amplifiers
  • Medical equipment and diagnostic devices
  • Industrial measurement and instrumentation
  • Automotive electronics — sensor interfaces and control modules
  • High-stability voltage dividers and reference circuits
  • Sensor signal conditioning and bridge circuits
  • Precision data acquisition and ADC front-ends
  • Test and measurement equipment
  • Telecommunications and high-fidelity audio
Product Introduction: ERA-6AEB105V Product Introduction

The ERA-6AEB105V is a 1MΩ high-precision thin film chip resistor from Panasonic’s industry-renowned ERA series. Manufactured using advanced sputtering thin film technology on a high-purity alumina substrate, this resistor delivers exceptional performance characteristics including ±0.5% resistance tolerance, ±50ppm/°C temperature coefficient, and excellent long-term stability — specifications that place it firmly in the precision resistor category, well above standard thick film devices.

The thin film resistive layer is deposited by sputtering a metallic alloy (typically a nickel-chromium or similar precision alloy) in a vacuum environment, producing an extremely uniform, dense film with precisely controlled thickness and composition. This manufacturing method results in a resistor element with superior noise performance, tighter tolerance control, and better stability compared to thick film alternatives.

The ERA-A series features anti-sulfur termination construction, which uses a specially designed electrode structure that eliminates the silver-based outer electrode layer vulnerable to sulfur contamination. This makes the ERA-6AEB105V particularly well-suited for applications in industrial environments, automotive engine compartments, and other settings where sulfur compounds in the atmosphere could cause conventional resistors to fail over time.

With a 0.125W power rating, 75V working voltage, and an operating temperature range spanning -55°C to +155°C, this resistor covers a wide range of precision application requirements. Supplied in tape-and-reel packaging (5,000 pieces per 7-inch reel) and fully RoHS compliant, the ERA-6AEB105V is ready for high-volume automated SMT assembly.

Panasonic’s ERA series thin film resistors are widely recognized in the industry for their consistency and reliability, making them a preferred choice in medical equipment, automotive electronics, industrial instrumentation, and other high-reliability applications where resistor accuracy directly impacts system performance.

Working Principle: ERA-6AEB105V Working Principle

A thin film resistor operates by controlling the flow of electrical current through a precisely deposited metallic resistive film on an insulating ceramic substrate. Unlike thick film resistors which use screen-printed paste, thin film resistors are fabricated using vacuum deposition techniques that produce a much thinner, more uniform, and more stable resistive layer.

In the ERA-6AEB105V, the fabrication process begins with a high-purity 96% alumina ceramic substrate, which provides excellent electrical insulation, high thermal conductivity, and a smooth surface ideal for thin film deposition. The resistive layer — typically a nickel-chromium (NiCr) or similar precision alloy — is deposited onto the substrate using DC magnetron sputtering. In this process, a target of the resistive alloy is bombarded with high-energy ions in a vacuum chamber, causing atoms to be ejected (sputtered) from the target and deposited onto the substrate surface. The resulting film is extremely thin (typically only a few hundred to a few thousand angstroms), highly uniform in thickness and composition, and densely packed at the atomic level.

Following deposition, the resistor film is patterned using photolithography and etching to define the precise resistor geometry. The resistance value is then fine-tuned through a laser trimming process, where a focused laser beam ablates portions of the resistive film to adjust the resistance to within the specified tolerance (±0.5% for this part). The trimming can be performed in various patterns (L-cut, straight-cut, etc.) depending on the required precision and power handling characteristics.

A protective overcoat of silicon nitride or similar dielectric material is then deposited via plasma-enhanced chemical vapor deposition (PECVD) to protect the thin film resistor element from moisture, mechanical damage, and environmental contaminants. This passivation layer is critical for maintaining the excellent long-term stability characteristics of thin film resistors.

End terminations are applied in multiple layers: typically a titanium-tungsten (TiW) or chrome adhesion layer, a nickel barrier layer to prevent solder leaching, and a tin (Sn) outer plating for solderability. The ERA series features an anti-sulfur termination design that eliminates silver from the electrode structure, preventing sulfur-induced corrosion failures in harsh industrial and automotive environments.

When current flows through the thin film resistor, electrons scatter off the metallic lattice, impurities, and grain boundaries, converting electrical energy into thermal energy (Joule heating). The excellent thermal conductivity of the alumina substrate efficiently conducts this heat away, allowing the ERA-6AEB105V to dissipate up to 0.125W continuously while maintaining stable resistance characteristics. The thin film structure inherently produces lower electrical noise than thick film resistors because the homogeneous metallic film provides a more uniform current path with fewer scattering centers.

Pin Description: ERA-6AEB105V Pin Definition and Functions
Terminal Type Description
Terminal 1 (End A) End Electrode First resistor terminal — anti-sulfur design with Ni barrier and matte Sn plating
Terminal 2 (End B) End Electrode Second resistor terminal — anti-sulfur design with Ni barrier and matte Sn plating

Note: The ERA-6AEB105V is a non-polarized passive component. Either terminal may be connected to either side of the circuit without affecting performance. The thin film resistive element is symmetrically distributed between the two end electrodes.

Application Scenarios: In which products and applications is ERA-6AEB105V used
  • Precision voltage dividers and reference circuits
  • Operational amplifier feedback networks
  • Medical instrumentation and patient monitoring equipment
  • Industrial process control and measurement systems
  • Automotive sensor interfaces and control modules
  • Wheatstone bridge and strain gauge signal conditioning
  • Precision ADC/DAC analog front-end circuits
  • Test and measurement instruments — oscilloscopes, multimeters
  • High-fidelity audio equipment and professional audio
  • Telecommunications infrastructure equipment
Alternative Models: What chips are recommended as replacements for ERA-6AEB105V
Model Resistance Tolerance TCR Package
ERA-6AEB104V 100kΩ ±0.5% ±50ppm/°C 0603
ERA-6AEB103V 10kΩ ±0.5% ±50ppm/°C 0603
ERA-6AEB2003V 200kΩ ±0.5% ±50ppm/°C 0603
ERA-6AEB4993V 499kΩ ±0.5% ±50ppm/°C 0603
RP0603BRD07105KL 1MΩ ±0.1% ±25ppm/°C 0603
ERJ-6ENF1003V 100kΩ ±1% ±100ppm/°C 0603

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1