Opens in a new tab

Home » Passive Components, Resistors » ERA-6AEB2103V

ERA-6AEB2103V

Panasonic ERA series high precision thin film resistor, 210kΩ ±0.5%, 0.125W, ±50ppm/°C TCR, anti-sulfur, -55°C to +155°C

2023

Effective Inventory

Image for reference only

Manufacturer Part:

ERA-6AEB2103V

Package:

0603 (1608 Metric)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ERA-6AEB2103V is a high-precision thin film chip resistor from Panasonic’s ERA series, featuring 210kΩ resistance with ±0.5% tolerance in a compact 0603 (1608 Metric) surface-mount package. With a low ±50ppm/°C temperature coefficient, 0.125W power rating, and anti-sulfur termination construction, this resistor delivers excellent stability and reliability for precision analog circuits, automotive electronics, industrial instrumentation, and medical equipment where accuracy and long-term consistency are required.

Key Specifications

Resistance 210kΩ (2103 = 210 × 10³)
Tolerance ±0.5% (High precision)
Power Rating 0.125W (1/8W)
Rated Voltage 75V
Overload Voltage 150V (2.5× rated, 5s)
Technology Thin Film (Sputtered Metal Film)
Temperature Coefficient ±50ppm/°C
Package / Case 0603 (1608 Metric)
Dimensions (L × W × H) 1.60mm × 0.80mm × 0.45mm
Operating Temperature -55°C to +155°C
Moisture Sensitivity MSL 1 (Unlimited)
Special Feature Anti-Sulfur Termination (No Silver)
Termination Anti-sulfur design, Ni-barrier, Sn-plated
Packaging 7″ Reel, Paper Tape (5,000 pcs/reel)
Standards RoHS Compliant, AEC-Q200 Compatible
Series ERA Series (High Precision Thin Film)

Features

  • High precision thin film technology with ±0.5% tight tolerance
  • Low temperature coefficient ±50ppm/°C for stable performance
  • Anti-sulfur termination design — immune to sulfur contamination
  • Excellent long-term stability and reliability
  • Low electrical noise for precision signal processing
  • Wide operating temperature range: -55°C to +155°C
  • 0.125W power rating with 75V working voltage
  • MSL Level 1 — no dry bake required
  • RoHS compliant; lead-free and halogen-free
  • Panasonic precision manufacturing quality

Applications

  • Precision analog circuits and operational amplifiers
  • Automotive electronics — sensor interfaces
  • Medical equipment and diagnostic devices
  • Industrial measurement and instrumentation
  • High-stability voltage dividers and references
  • Sensor signal conditioning and bridge circuits
  • Precision data acquisition and ADC front-ends
  • Test and measurement equipment
  • Telecommunications infrastructure
  • High-fidelity audio equipment
Product Introduction: ERA-6AEB2103V Product Introduction

The ERA-6AEB2103V is a 210kΩ high-precision thin film chip resistor from Panasonic’s ERA series — a line of precision resistors widely recognized in the electronics industry for their accuracy, stability, and reliability. Manufactured using advanced sputtering thin film technology on a high-purity alumina substrate, this resistor offers ±0.5% resistance tolerance and ±50ppm/°C temperature coefficient — performance levels well above standard thick film resistors.

The 210kΩ value (encoded as “2103” in the part number = 210 × 10³ ohms) is an E96 series standard value, making it useful for a wide range of precision circuit designs. The ±0.5% tolerance is significantly tighter than the ±1% commonly found in standard precision thick film resistors, making this part suitable for applications where more precise resistance values are required without stepping up to the much more expensive ±0.1% ultra-precision grade.

The ERA-A series features Panasonic’s anti-sulfur termination technology, which eliminates silver from the outer electrode structure. Silver-based terminations in conventional resistors can react with sulfur compounds present in industrial environments, automotive under-hood applications, and certain geographic regions, forming silver sulfide that causes resistance drift and eventual failure. The anti-sulfur design of the ERA series ensures reliable long-term performance even in sulfur-contaminated environments.

With a 0.125W (1/8W) power rating, 75V working voltage, and an operating temperature range spanning -55°C to +155°C, this resistor covers a broad range of precision application requirements. The low temperature coefficient of ±50ppm/°C means the resistance changes by only 0.5% over the full 100°C industrial temperature range, providing stable circuit performance across varying environmental conditions.

Supplied in tape-and-reel packaging (5,000 pieces per 7-inch paper tape reel) and fully RoHS compliant, the ERA-6AEB2103V is ready for high-volume automated SMT assembly. MSL Level 1 classification means no dry packing or pre-assembly bake-out is required, simplifying inventory management and manufacturing flow.

Panasonic’s ERA series thin film resistors are a preferred choice for design engineers working on medical devices, automotive electronics, industrial instrumentation, and other applications where resistor precision and long-term stability directly impact overall system accuracy and reliability.

Working Principle: ERA-6AEB2103V Working Principle

A high-precision thin film resistor operates by controlling current flow through a precisely deposited metallic resistive film on a ceramic substrate. The thin film manufacturing process — using vacuum sputtering rather than screen-printing — produces a more uniform, denser, and more stable resistive layer than thick film technology, enabling tighter tolerances, lower TCR, and better long-term stability.

In the ERA-6AEB2103V, the resistor is fabricated on a high-purity 96% alumina (Al2O3) ceramic substrate that provides excellent electrical insulation, high thermal conductivity, and a smooth surface ideal for uniform thin film deposition.

The resistive layer is deposited using DC magnetron sputtering, a physical vapor deposition (PVD) technique performed in a high-vacuum chamber. A target of the resistive alloy — typically a nickel-chromium (NiCr) or similar precision alloy optimized for low temperature coefficient — is bombarded by energetic ions (usually argon ions generated in a plasma discharge). This bombardment ejects (sputters) atoms from the target surface, which travel through the vacuum and condense onto the substrate, building up a thin, uniform, dense metallic film. The thickness is precisely controlled by deposition time and power, typically resulting in films in the range of a few hundred to a few thousand angstroms thick.

The ±50ppm/°C temperature coefficient is achieved through careful selection of the resistive alloy composition and precise control of the sputtering parameters. In metallic conductors, resistance increases with temperature due to increased electron-phonon scattering — as lattice vibrations intensify at higher temperatures, they scatter conduction electrons more frequently. By alloying different metals (like nickel and chromium) in specific proportions, the intrinsic TCR can be tuned — nickel has a high positive TCR, while chromium has a lower or even negative TCR — and their combination can achieve a very low net TCR.

After deposition, the resistor pattern is defined using photolithography and etching: a photoresist is applied, exposed through a precision mask, developed, and the unwanted resistive film is etched away, leaving the precisely patterned resistor element.

Laser trimming then adjusts the resistance to within the ±0.5% tolerance. A focused laser beam ablates portions of the resistive film — typically in an L-shaped or straight cut pattern — effectively lengthening the current path and increasing resistance. The process is continuously monitored with high-precision resistance measurement and stops automatically when the target value is reached.

A protective passivation layer — typically silicon nitride (SiN) deposited by plasma-enhanced chemical vapor deposition (PECVD) — is applied over the resistor element. This passivation protects the thin film from moisture, mechanical damage, and environmental contaminants, and is critical for maintaining the resistor’s precision specifications over its service life.

The anti-sulfur termination is applied in multiple layers: a base adhesion layer (such as titanium-tungsten or chromium), a nickel barrier layer (to prevent solder leaching during assembly), and an outer tin plating for solderability. Critically, no silver is used in the outer electrode — the material most susceptible to sulfur-induced corrosion — making the ERA series resistant to the sulfidation failures that can occur in harsh environments.

When current flows through the resistor, the uniform metallic thin film provides a consistent resistance path with very low electrical noise (far lower than thick film resistors, which have noise from grain boundaries and glass-metal interfaces). The 0.125W power rating means the resistor can continuously dissipate up to an eighth of a watt at 70°C, with the alumina substrate efficiently conducting heat away to the end terminations and PCB.

The combination of precision thin film technology, anti-sulfur termination, and Panasonic’s manufacturing quality makes the ERA-6AEB2103V a reliable choice for precision applications where long-term stability matters.

Pin Description: ERA-6AEB2103V Pin Definition and Functions
Terminal Type Description
Terminal 1 (End A) End Electrode First resistor terminal — anti-sulfur design with Ni barrier and matte Sn plating, no silver in termination
Terminal 2 (End B) End Electrode Second resistor terminal — anti-sulfur design with Ni barrier and matte Sn plating, no silver in termination

Note: The ERA-6AEB2103V is a non-polarized passive component. Either terminal may be connected to either side of the circuit without affecting electrical performance. The thin film resistive element is symmetrically positioned between the two end electrodes.

Application Scenarios: In which products and applications is ERA-6AEB2103V used
  • Precision voltage dividers and reference circuits
  • Operational amplifier feedback and gain networks
  • Automotive sensor interfaces and control modules
  • Medical instrumentation and patient monitoring
  • Industrial process control and measurement systems
  • Wheatstone bridge and strain gauge conditioning
  • Precision ADC/DAC analog front-end circuits
  • Test and measurement instruments
  • High-fidelity audio and professional audio equipment
  • Telecommunications infrastructure equipment
Alternative Models: What chips are recommended as replacements for ERA-6AEB2103V
Model Resistance Tolerance TCR Package
ERA-6AEB1003V 100kΩ ±0.5% ±50ppm/°C 0603
ERA-6AEB2003V 200kΩ ±0.5% ±50ppm/°C 0603
ERA-6AEB2203V 220kΩ ±0.5% ±50ppm/°C 0603
ERA-6AEB105V 1MΩ ±0.5% ±50ppm/°C 0603
RP0603BRD072103KL 210kΩ ±0.1% ±25ppm/°C 0603
ERJ-6ENF2103V 210kΩ ±1% ±100ppm/°C 0603

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1