Opens in a new tab

ERJP08J100V

10Mohm 1W anti-surge resistor, ±5%, 2010 SMD, -55 to 155C, AEC-Q200

7340

Effective Inventory

Image for reference only

Manufacturer Part:

ERJP08J100V

Package:

2010 (5025 Metric, 5.0×2.5mm)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The Panasonic ERJP08J100V is a 10 MΩ, 1W anti-surge thick film chip resistor in a 2010 (5025 metric) package. With ±5% tolerance and high surge withstand capability, it provides reliable high-value resistance in automotive and industrial power applications.

Key Specifications

Resistance 10 MΩ
Tolerance ±5% (J)
Power Rating 1 W
TCR ±200 ppm/°C
Surge Withstand Per IEC 61000-4-5
Operating Temperature -55°C to +155°C
Package 2010 (5025 Metric, 5.0×2.5mm)

Features

  • Anti-surge thick film technology
  • High 10MΩ resistance value
  • 1W power rating
  • Excellent surge withstand capability
  • AEC-Q200 qualified
  • RoHS compliant

Applications

  • High-voltage voltage dividers
  • Bleeder resistor for capacitor discharge
  • EMI filter damping resistor
  • Automotive sensor biasing
Product Introduction: ERJP08J100V Product Introduction

The ERJP08J100V from Panasonic is a 10 MΩ, 1W anti-surge thick film chip resistor from the ERJP08 series in a 2010 (5025 metric) package. The anti-surge construction withstands transient voltage spikes per IEC 61000-4-5, making it suitable for high-voltage divider and bleeder applications. With ±5% tolerance, 1W power rating, and AEC-Q200 qualification, it provides reliable high-value resistance in automotive and industrial circuits operating from -55°C to +155°C.

Working Principle: ERJP08J100V Working Principle

The ERJP08 series uses Panasonic anti-surge thick film technology with a specially formulated resistive element and protective overcoat designed to absorb transient energy. The thick film paste is screen-printed on an alumina substrate and laser-trimmed to the target resistance. The overcoat provides environmental protection and enhances surge withstand capability. At 10MΩ, the resistor is used in high-impedance circuits such as voltage dividers for high-voltage measurement or bleeder paths for capacitor discharge.

Pin Description: ERJP08J100V Pin Definition and Functions
Pin Name Type Description
1 Term 1 Passive Resistor terminal 1
2 Term 2 Passive Resistor terminal 2
Application Scenarios: In which products and applications is ERJP08J100V used
  • High-voltage measurement voltage dividers
  • Capacitor bleeder/discharge resistor
  • EMI filter damping and termination
  • Automotive sensor bias and pull-up
Alternative Models: What chips are recommended as replacements for ERJP08J100V
Model Manufacturer Key Difference
CRG2010J10M TE Connectivity 10MΩ 1W alternative
RCR2010JK10MJ KOA Speer Surge-resistant equivalent

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1