Opens in a new tab

Home » Diodes, Integrated Circuits ICs » ESD7951ST5G

ESD7951ST5G

Bidirectional ESD diode, 5V Vrwm, 0.5pF, 12.9V clamp@1A, SOD-923, USB/antenna protection

696

Effective Inventory

Image for reference only

Manufacturer Part:

ESD7951ST5G

Package:

SOD-923 (1.0 x 0.6 x 0.5 mm, 0.65mm pitch)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

The ESD7951ST5G from onsemi is a bidirectional ultra-low capacitance ESD protection diode in a 2-pin SOD-923 package (1.0 x 0.6 mm). It provides 5 V working voltage, 12.9 V clamping voltage at 1 A peak pulse current, 0.5 pF junction capacitance, and 1 µA maximum leakage current. The device protects against IEC 61000-4-2 ESD events. Its ultra-low capacitance makes it suitable for high-frequency signal lines such as USB 2.0 High-Speed and antenna paths. Operating temperature range is -55°C to +125°C. The T5G suffix denotes 8000-unit tape-and-reel packaging.

Product Introduction: ESD7951ST5G Product Introduction

The ESD7951 from onsemi is a bidirectional ESD protection diode designed for ultra-low capacitance applications. The ESD7951ST5G is the SOD-923 tape-and-reel version with 8000 units per reel. With only 0.5 pF junction capacitance, the device is optimized for high-frequency signal paths where capacitive loading must be minimized — USB 2.0 High-Speed (480 Mbps), HDMI, RF antenna lines, and other impedance-controlled interfaces.

The bidirectional configuration protects signal lines that swing both above and below ground, making it suitable for AC-coupled and differential pair interfaces. The 5 V reverse working voltage (VRWM) covers 3.3 V and 5 V logic rails, while the 12.9 V clamping voltage at 1 A ensures the protected IC sees a limited voltage during an ESD strike.

The SOD-923 package occupies only 0.6 mm² of board area with a 0.5 mm profile, making it one of the smallest ESD protection packages available. This is critical for smartphones, tablets, and wearables where PCB real estate is extremely limited.

The ESD7951 is also available in an automotive-qualified version (SZESD7951ST5G) with AEC-Q101 compliance for automotive applications.

Note: The LCSC listing marks this part as discontinued, but onsemi’s ESD7951 product family remains in production. Verify current availability with authorized distributors before designing into new products.

Working Principle: ESD7951ST5G Working Principle

**Bidirectional TVS Diode Structure:** The ESD7951 uses back-to-back Zener diodes in a single chip, providing symmetric clamping for both positive and negative ESD transients. In normal operation (voltage between -VRWM and +VRWM), both diodes are reverse-biased and draw only leakage current (1 µA max). When a positive transient exceeds VBR, the upper Zener diode avalanches and clamps the voltage. When a negative transient exceeds -VBR, the lower Zener diode conducts.

**Ultra-Low Capacitance Design:** The 0.5 pF capacitance is achieved through a specialized junction geometry that minimizes the depletion region area while maintaining adequate avalanche energy absorption. This is critical for USB 2.0 High-Speed where the specification limits total capacitive loading per D+/D- line.

**Clamping Mechanism:** During an IEC 61000-4-2 ESD event (8 kV contact, 15 kV air), the diode avalanches within sub-nanoseconds, diverting the ESD current away from the protected IC. The clamping voltage (12.9 V at 1 A) represents the voltage the protected device experiences during the event. Lower clamping voltage provides better protection.

Pin Description: ESD7951ST5G Pin Definition and Functions
Pin Name Type Description
1 I/O I/O ESD protection terminal; connect to protected signal line; bidirectional; 5V working voltage; 0.5pF capacitance to GND
2 GND G Ground reference; connect to PCB ground plane via shortest path; via-in-pad recommended for low inductance
Application Scenarios: In which products and applications is ESD7951ST5G used
Application Description
USB 2.0 High-Speed ESD Protection Protect D+/D- lines on USB 2.0 HS (480Mbps) ports; 0.5pF per line stays well under USB spec capacitance budget; place within 3mm of connector; pair with common-mode choke for full protection
RF Antenna Line Protection Protect antenna feed line from ESD at exposed connector; 0.5pF capacitance does not detune 2.4/5GHz impedance matching; bidirectional clamping suits AC-coupled RF paths
HDMI/DisplayPort Signal Protection Protect high-speed differential pairs; ultra-low capacitance preserves signal integrity; one diode per line placed near connector
Alternative Models: What chips are recommended as replacements for ESD7951ST5G
Model Manufacturer Compatibility Key Difference
ESD7951SOT5G onsemi Package Variant Same die in SOT-523 package (1.6×0.8mm); larger footprint but easier assembly; use when SOD-923 is too small for manufacturing capability
PRTR5V0U2X Nexperia Functional Equivalent Bidirectional ESD diode; 5V Vrwm; 0.8pF; SOT-143B; slightly higher capacitance; includes additional rail clamp diode
TPD2E001DRLR TI Competitive Alternative 2-channel ESD protection; 0.5pF per channel; SOT-533; integrated 2-in-1 saves board space vs two discrete diodes

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1