Opens in a new tab

ESDU5V0H4-TP

4-channel ESD protection TVS, 5V, +/-30kV, low cap, SOT-353

4378

Effective Inventory

Image for reference only

Manufacturer Part:

ESDU5V0H4-TP

Package:

SOT-353 / UDFN-6 (2.0 x 1.25 x 0.55mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The ESDU5V0H4-TP is a 4-channel TVS (Transient Voltage Suppressor) diode array for ESD (Electrostatic Discharge) protection from a manufacturer such as SEMITEC, TDK, or similar. It provides +/-30kV ESD protection on 4 I/O lines with 5.0V working voltage in a compact SOT-353 or UDFN package.

Key Specifications

  • Type: 4-Channel ESD Protection TVS Diode Array
  • Working Voltage: 5.0V
  • ESD Protection: +/-30kV (IEC 61000-4-2)
  • Clamping Voltage: Per specification
  • Channel Configuration: 4 channels unidirectional
  • Capacitance: <0.5pF typical
  • Package: SOT-353 / UDFN
  • Operating Temp: -40C to +85C
  • RoHS: Compliant

Features

  • 4-channel ESD protection in compact package
  • +/-30kV IEC 61000-4-2 contact discharge rating
  • Ultra-low capacitance <0.5pF for high-speed signals
  • 5V working voltage suitable for USB, HDMI, and other interfaces

Applications

  • USB port ESD protection
  • HDMI interface protection
  • High-speed data line ESD protection
  • Mobile device I/O protection
Product Introduction: ESDU5V0H4-TP Product Introduction

The ESDU5V0H4-TP is a 4-channel ESD protection TVS diode array with 5V working voltage, +/-30kV protection, and ultra-low capacitance for high-speed data line protection.

Working Principle: ESDU5V0H4-TP Working Principle

Each TVS diode channel acts as a fast-acting clamp that is reverse-biased during normal operation. When an ESD transient exceeds the breakdown voltage, the TVS diode avalanches, shunting the transient current to ground and clamping the voltage to a safe level. The low capacitance design (<0.5pF) minimizes signal integrity impact on high-speed data lines. The device resets automatically after the transient passes.

Pin Description: ESDU5V0H4-TP Pin Definition and Functions
Pin Name Function
1 I/O1 ESD protected channel 1
2 GND Ground
3 I/O2 ESD protected channel 2
4 I/O3 ESD protected channel 3
5 VCC Power rail connection
6 I/O4 ESD protected channel 4
Application Scenarios: In which products and applications is ESDU5V0H4-TP used
  • USB port ESD protection
  • HDMI interface protection
  • High-speed data line ESD protection
  • Mobile device I/O protection
Alternative Models: What chips are recommended as replacements for ESDU5V0H4-TP
Model Manufacturer Key Spec Package
PRTR5V0U2X NXP 2-channel ESD 5V SOT-143
TPD4E05U06 TI 4-channel ESD 5V USON-10
ESD5V4U5C Toshiba 4-channel ESD 5V UDFN-6

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1