Opens in a new tab

FT234XD-R

FTDI USB 2.0 FS to UART bridge, 3Mbaud, DFN-12 3x3mm, crystal-less, 1.8V~3.3V I/O

14066

Effective Inventory

Image for reference only

Manufacturer Part:

FT234XD-R

Package:

DFN-12 (3mm x 3mm, 0.5mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The FT234XD-R from FTDI Chip is an ultra-compact USB 2.0 full-speed to UART serial interface bridge in a 3mm x 3mm DFN-12 package. It converts USB to a UART serial port with data rates from 300bps to 3Mbaud, requires no external crystal, and supports 1.8V to 3.3V I/O voltage, making it ideal for space-constrained embedded systems and IoT devices.

Key Specifications

USB Interface USB 2.0 Full-Speed (12Mbps)
UART Data Rate 300bps ~ 3Mbaud
Supply Voltage (VCC) 2.97V ~ 5.5V (internal 1.8V LDO)
I/O Voltage 1.8V ~ 3.3V (configurable)
TX/RX FIFO 512 bytes each
Hardware Handshake CTS#, RTS#
Integrated EEPROM 2048-byte MTP for VID/PID/serial
Operating Temperature -40C ~ +85C
Package DFN-12 (3mm x 3mm, 0.5mm pitch)

Features

  • Crystal-less operation with internal clock recovery from USB
  • Configurable CBUS pins for LED, sleep, and clock outputs
  • USB battery charging detection (BCD) support
  • 2048-byte MTP memory for custom VID/PID and serial number
  • Configurable I/O drive strength (4mA ~ 16mA)
  • UART signal inversion option for legacy device compatibility

Applications

  • USB-to-serial adapters and cables
  • Embedded system debug and programming interfaces
  • IoT device firmware update ports
  • Wireless module configuration interfaces
  • Portable instrumentation data logging
Product Introduction: FT234XD-R Product Introduction

The FT234XD-R from FTDI Chip is a single-channel USB 2.0 full-speed to UART bridge controller in an ultra-compact DFN-12 package measuring just 3mm x 3mm. The device eliminates the need for an external crystal by recovering the clock from the USB data stream, reducing BOM cost and board area. It supports UART data rates from 300bps to 3Mbaud with 512-byte transmit and receive FIFOs for smooth data flow. The integrated 2048-byte MTP (Multi-Time Programmable) memory stores USB Vendor ID, Product ID, serial number, and other configuration data. Three CBUS pins can be configured for TX/RX LEDs, sleep mode indication, or clock output functions. The I/O voltage is independently configurable from 1.8V to 3.3V, enabling direct connection to low-voltage MCUs and FPGAs without level shifters.

Working Principle: FT234XD-R Working Principle

The FT234XD-R operates as a bridge between the USB host and a UART serial port. On the USB side, the device enumerates as a Virtual COM Port (VCP) using FTDI drivers or as a D2XX direct driver device. USB data is received and placed into the 512-byte receive FIFO, then serialized out the TXD pin at the configured baud rate. Similarly, data received on RXD is packed into the 512-byte transmit FIFO and sent to the USB host. The internal 1.8V LDO generates the core supply from VCC (2.97V~5.5V), and a 0.1uF capacitor on VDD decouples this rail. The MTP EEPROM is programmed via FTDI utilities to customize VID/PID, serial number, CBUS pin functions, and I/O drive strength. USB battery charging detection can signal a connected charger to deliver higher current for faster device charging.

Pin Description: FT234XD-R Pin Definition and Functions
Pin Name Function
1 TXD UART Transmit Output
2 VCC 3.3V Power Input/Output
3 CBUS2 Configurable CBUS Pin
4 CBUS1 Configurable CBUS Pin
5 CBUS0 Configurable CBUS Pin
6 VDD 1.8V Internal LDO Output
7 DM USB Data Negative
8 DP USB Data Positive
9 GND Ground
10 RXD UART Receive Input
11 RTS# Request to Send Output
12 CTS# Clear to Send Input
Application Scenarios: In which products and applications is FT234XD-R used
  • USB-to-serial adapters: Create compact USB-to-UART cables and dongles for connecting legacy serial devices to modern PCs
  • Embedded debug: Provide a USB-based debug console and firmware download port for MCU-based products
  • IoT firmware updates: Enable field firmware updates via USB on IoT devices with 1.8V~3.3V MCU interfaces
  • Wireless module config: Program and configure BLE, Wi-Fi, and LoRa modules through the USB-UART bridge
  • Data logging: Transfer measurement data from portable instruments to a PC for analysis via USB virtual COM port
Alternative Models: What chips are recommended as replacements for FT234XD-R
Model Brand Baud Rate Package Key Difference
FT232RQ FTDI 3Mbaud QFN-32 More I/O, larger package
CP2102N-A02-GQFN24 Silicon Labs 2Mbaud QFN-24 Integrated EEPROM, 2Mbaud
CH340N WCH 2Mbaud SOP-8 Low cost, 2Mbaud
MCP2200-I/SN Microchip 1Mbaud SOIC-20 8 GPIO pins
FT230XQ-R FTDI 3Mbaud QFN-16 4 GPIO, slightly larger

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1