Opens in a new tab

FT245RL-REEL

USB to Parallel FIFO Bridge, 12Mbps, 256B RX Buffer, SSOP-28, FTDI

5678

Effective Inventory

Image for reference only

Manufacturer Part:

FT245RL-REEL

Package:

SSOP-28 (10.2 x 5.3 x 1.8 mm, 0.65mm pitch)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The FT245RL-REEL from FTDI Chip is a USB 2.0 full-speed to parallel FIFO interface bridge with 256-byte receive and 128-byte transmit buffers in an SSOP-28 package.

Key Specifications

Type USB 2.0 FS to Parallel FIFO Interface IC
USB Speed Full Speed (12 Mbps)
FIFO Depth 256 bytes RX, 128 bytes TX
Interface Parallel FIFO (8-bit data bus)
Supply Voltage 3.3 V (internal) with 5V-tolerant I/O
EEPROM Integrated (VID/PID/serial number configurable)
Drivers VCP (virtual COM) and D2XX (direct API)
Package SSOP-28
Operating Temperature -40C to +85C

Features

  • USB 2.0 full-speed compliant
  • 8-bit parallel FIFO interface
  • 256-byte RX and 128-byte TX buffers
  • Integrated EEPROM for VID/PID customization
  • No external USB pull-up resistors required
  • Integrated 3.3V regulator (only 5V supply needed)
  • Virtual COM port and direct driver support
  • Transfer rates up to 1 MB/s

Applications

  • USB-to-parallel interface adapters
  • Embedded system USB connectivity
  • Data acquisition USB interface
  • Custom USB peripheral development
Product Introduction: FT245RL-REEL Product Introduction

The FT245RL-REEL from FTDI Chip is a USB 2.0 full-speed to parallel FIFO bridge controller. The device converts USB data to a simple 8-bit parallel FIFO interface with handshaking signals (RXF, TXE, RD, WR), enabling microcontrollers and FPGAs to communicate with a USB host without implementing USB protocol stacks. The 256-byte receive and 128-byte transmit buffers absorb USB transfer latency and provide smooth data streaming. The integrated 93C46-compatible EEPROM allows customization of USB VID, PID, serial number, and device description strings. The internal 3.3V regulator means the device requires only a single 5V supply, with 5V-tolerant I/O pins for direct connection to 5V logic. Virtual COM port (VCP) drivers provide a serial port abstraction, while the D2XX direct driver API enables maximum transfer rates up to 1 MB/s.

Working Principle: FT245RL-REEL Working Principle

The FT245RL-REEL implements the complete USB 2.0 full-speed device protocol in hardware, including the USB SIE (Serial Interface Engine), USB transceiver, and protocol handler. On the USB side, the SIE handles NRZI encoding/decoding, bit stuffing, CRC generation/checking, and packet formatting. On the FIFO side, the 8-bit data bus (D0-D7) transfers data between the FT245R and the external controller. When data is available from the USB host, the RXF# pin goes LOW; the external controller reads data by asserting RD# LOW, which clocks the next byte from the RX FIFO onto D0-D7. To send data to the USB host, the external controller checks TXE# (LOW means TX FIFO has space), then writes data by placing it on D0-D7 and asserting WR# LOW. The handshaking signals ensure no data is lost even when the external controller and USB host operate at different speeds. The internal EEPROM stores USB descriptors (VID, PID, manufacturer string, product string, serial number) that are read during USB enumeration. The internal 3.3V regulator generates the USB transceiver supply from the 5V VCC input.

Pin Description: FT245RL-REEL Pin Definition and Functions
Pin Group Name Type Function
8 pins D0-D7 I/O 8-bit bidirectional data bus
Dedicated RXF# Output RX FIFO has data (active LOW)
Dedicated TXE# Output TX FIFO has space (active LOW)
Dedicated RD# Input Read strobe (active LOW)
Dedicated WR# Input Write strobe (active LOW)
Dedicated USBDM/USBDP I/O USB data lines
Dedicated EECS/EESK/EEDATA I/O EEPROM interface
Application Scenarios: In which products and applications is FT245RL-REEL used
  • CPLD/FPGA development board USB-to-parallel data interface
  • Custom data acquisition system with USB FIFO streaming
  • Legacy parallel printer to USB adapter
  • Embedded system USB debug port with 1MB/s transfer rate
Alternative Models: What chips are recommended as replacements for FT245RL-REEL
Manufacturer Part Number Package Notes
FTDI FT2232HL-REEL LQFP-64 Dual channel, HS, FIFO+UART
FTDI FT232H-REEL LQFP-48 HS USB to FIFO/SPI/JTAG
FTDI FT245BL-REEL QFN-32 Same function, smaller package
Cypress CY7C68013A-56LTXC SSOP-56 USB 2.0 HS, programmable FIFO
Microchip MCP2210-I/SS SSOP-20 USB to SPI (not FIFO)

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1