Opens in a new tab

FT4232HL-REEL

Quad USB 2.0 HS to UART/MPSSE IC, 4 UARTs, 12Mbaud, LQFP-64

2409

Effective Inventory

Image for reference only

Manufacturer Part:

FT4232HL-REEL

Package:

LQFP-64 (10 × 10 × 1.45 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The FT4232HL-REEL from FTDI is a quad-channel USB 2.0 High Speed (480 Mb/s) to UART/MPSSE IC in a 64-pin LQFP package. As FTDI’s 5th generation USB device, it features four UARTs with two independently configurable MPSSE engines for JTAG, SPI, I2C, and bit-bang emulation. The entire USB protocol is handled on-chip with no firmware programming required.

Key Specifications

  • USB 2.0 High Speed (480 Mb/s) and Full Speed (12 Mb/s)
  • 4 UART Channels (2 with MPSSE)
  • UART Data Rate: up to 12 Mbaud (RS232/RS422/RS485)
  • Supply Voltage: 3.3 V (core 1.8 V via internal LDO)
  • Operating Current: 70 mA typ
  • I/O Drive Strength: 4/8/12/16 mA programmable
  • ESD: ±2 kV HBM, ±200 V MM, ±500 V CDM
  • Operating Temperature: -40°C to +85°C
  • Package: LQFP-64 (10 × 10 mm), MSL 3

Features

  • Single chip USB to quad serial ports
  • Two MPSSE engines for JTAG/SPI/I2C emulation
  • Integrated 1.8 V LDO and PLL (12 MHz → 480 MHz)
  • Configurable VCP and D2XX drivers (royalty-free)
  • 5 V tolerant I/O pins
  • Adjustable receive buffer timeout
  • Auto RS485 transmit enable control

Applications

  • USB to quad UART/SPI/JTAG debug interfaces
  • Embedded system programming and debugging
  • Industrial communication gateways
  • FPGA configuration via JTAG
  • Consumer electronics USB bridges
Product Introduction: FT4232HL-REEL Product Introduction

The FT4232H is FTDI’s 5th generation USB device, providing a single-chip USB 2.0 High Speed (480 Mb/s) to quad UART/MPSSE bridge solution. The device integrates four independent UART channels, two of which can be independently configured as Multi-Protocol Synchronous Serial Engine (MPSSE) interfaces for JTAG, SPI, I2C, or bit-bang operation. The entire USB protocol is handled on-chip, eliminating the need for USB firmware development. The highly integrated design includes an internal +1.8 V LDO regulator for VCORE, an on-chip clock multiplier PLL (12 MHz to 480 MHz), and programmable I/O drive strength. FTDI’s royalty-free Virtual COM Port (VCP) and Direct (D2XX) drivers further simplify system integration.

Working Principle: FT4232HL-REEL Working Principle

The FT4232H connects to a USB host through its D+ and D- pins, handling all USB 2.0 High Speed protocol transactions internally. The internal PLL multiplies the 12 MHz external clock to 480 MHz for USB HS operation. Data received over USB is demultiplexed into one of four UART channels based on endpoint addressing. Channels A and B include MPSSE engines that translate USB commands into synchronous serial protocols (JTAG TCK/TMS/TDI/TDO, SPI SCK/MOSI/MISO/CS, I2C SCL/SDA). Each UART channel has independent baud rate generators and 256-byte transmit/receive FIFOs. The internal LDO generates 1.8 V for the core logic from the 3.3 V supply. Configurable EEPROM stores USB VID/PID, serial number, and channel mode settings.

Pin Description: FT4232HL-REEL Pin Definition and Functions
Pin Name Description
1-8 AD0-AD7 Port A Data Bus (MPSSE/UART)
9 GND Ground
10 SI/WUA Send Immediate / Wakeup A
11 VCIO Configurable I/O Voltage
12 EECS EEPROM Chip Select
13 EECLK EEPROM Clock
14 EEDATA EEPROM Data
15 DM USB Data Minus
16 DP USB Data Plus
17 VREGIN Regulator Input (5V)
18 VCORE Core Supply (1.8V from LDO)
19 TEST Test Pin (tie to GND)
20 RESET# Reset Input (Active Low)
21-28 BD0-BD7 Port B Data Bus (MPSSE/UART)
29 SI/WUB Send Immediate / Wakeup B
30 PWREN# USB Power Enable
31-38 CD0-CD7 Port C Data Bus (UART)
39 SI/WUC Send Immediate / Wakeup C
40-47 DD0-DD7 Port D Data Bus (UART)
48 SI/WUD Send Immediate / Wakeup D
49 SUSP# USB Suspend Indicator
50 XTIN Oscillator Input (12 MHz)
51 XTOUT Oscillator Output
52-64 VCC/GND Power and Ground
Application Scenarios: In which products and applications is FT4232HL-REEL used
  • FPGA/CPU Debug Interfaces: Quad JTAG/SPI/UART ports enable simultaneous programming and debugging of multiple devices
  • Industrial Gateways: USB to multi-channel RS232/RS485 bridges for factory communication systems
  • Embedded Development Boards: On-board debug and console access via single USB connection
  • Consumer Electronics: USB to multi-port serial expansion in set-top boxes and IoT gateways
  • Automotive Diagnostics: Multi-protocol communication via MPSSE for ECU programming and testing
Alternative Models: What chips are recommended as replacements for FT4232HL-REEL
Model Brand Channels Speed MPSSE
FT2232HL FTDI 2 480 Mb/s Yes (2)
FT232HL FTDI 1 480 Mb/s Yes (1)
CH9344 WCH 4 12 Mb/s No
CP2105 Silicon Labs 2 12 Mb/s No
TUSB3410 TI 1 12 Mb/s No

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1