Opens in a new tab

FT4232HL-TRAY

Quad-channel USB 2.0 Hi-Speed to UART/FIFO bridge, MPSSE, 64-LQFP, -40 to 85°C

7939

Effective Inventory

Image for reference only

Manufacturer Part:

FT4232HL-TRAY

Package:

64-LQFP (10 x 10 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The FT4232HL-TRAY from FTDI Chip is a quad-channel USB 2.0 Hi-Speed to UART/FIFO/MPSSE bridge IC in a 64-pin LQFP package. Providing four independent serial channels (two configurable as UART, two as UART or FIFO) with Hi-Speed USB (480 Mbps) support, it enables multi-interface connectivity for industrial, embedded, and debug applications.

Key Specifications

USB Interface USB 2.0 Hi-Speed (480 Mbps)
Channels 4 independent (2 UART, 2 UART/FIFO)
Baud Rate (UART) Up to 12 Mbaud
FIFO Mode Up to 8 MB/s data transfer
MPSSE Yes (Multi-Protocol Synchronous Serial Engine)
GPIO Configurable CBUS pins per channel
Supply Voltage 1.8 V core, 3.3 V I/O
Operating Temperature -40°C to 85°C
Package 64-LQFP (Tray)
Drivers VCP (Virtual COM Port) and D2XX

Features

  • Four independent serial channels from a single USB connection
  • USB 2.0 Hi-Speed (480 Mbps) for high-throughput applications
  • MPSSE engine for SPI, I2C, JTAG synchronous serial protocols
  • Two channels support 245 FIFO mode for high-speed data streaming
  • Integrated 1.8 V voltage regulator — single 3.3 V supply operation
  • Drivers for Windows, Linux, macOS, and Android

Applications

  • Multi-port USB-to-UART debug and programming adapters
  • Embedded system JTAG/SPI/I2C debug interfaces
  • Industrial multi-channel serial communication gateways
  • FPGA and SoC development boards with multi-interface USB connectivity
  • Robotics and motor control multi-UART bridge
Product Introduction: FT4232HL-TRAY Product Introduction

The FT4232HL-TRAY from FTDI Chip is a quad-channel USB 2.0 Hi-Speed to UART/FIFO bridge IC. It provides four independent serial interface channels from a single USB Hi-Speed (480 Mbps) connection: two channels are configurable as UART with baud rates up to 12 Mbaud, and the other two channels support either UART or 245 FIFO mode for data streaming up to 8 MB/s. Channels A and B include FTDI’s MPSSE (Multi-Protocol Synchronous Serial Engine) for implementing SPI, I2C, and JTAG interfaces. The device integrates a 1.8 V voltage regulator, requiring only a single 3.3 V supply. FTDI provides royalty-free VCP and D2XX drivers for all major operating systems.

Working Principle: FT4232HL-TRAY Working Principle

The FT4232HL-TRAY operates as a multi-protocol USB bridge: (1) USB Interface — the device enumerates as a composite USB device with four independent interfaces, connecting to the host via USB 2.0 Hi-Speed (480 Mbps); (2) Channel Controllers — each of the four channels independently handles its assigned protocol (UART, FIFO, or MPSSE), with dedicated TX/RX buffers (256 bytes TX, 256 bytes RX per channel); (3) MPSSE Engine — channels A and B include dedicated MPSSE controllers that handle clock generation and data shift operations for SPI (up to 30 MHz), I2C (up to 1 MHz), and JTAG (TCK up to 30 MHz) protocols without CPU intervention; (4) FIFO Controller — channels C and D in 245 FIFO mode provide synchronous bidirectional data transfer with externally controlled read/write strobes for high-speed streaming to FPGAs and other logic.

Pin Description: FT4232HL-TRAY Pin Definition and Functions
Pin Group Function
USB DM/DP USB 2.0 Hi-Speed differential data pair
AD0-AD7 (Ch A) Channel A data bus / UART TX/RX / MPSSE
BD0-BD7 (Ch B) Channel B data bus / UART TX/RX / MPSSE
CD0-CD7 (Ch C) Channel C data bus / UART or FIFO
DD0-DD7 (Ch D) Channel D data bus / UART or FIFO
CBUS pins Configurable GPIO per channel (clock output, LED drive, etc.)
VCC/VREGIN 3.3 V supply input / internal 1.8 V regulator
GND Ground
Application Scenarios: In which products and applications is FT4232HL-TRAY used
  • Multi-port USB debug adapter providing 4 UART channels for simultaneous firmware development on multiple MCUs
  • FPGA development board with MPSSE-based JTAG programming and two FIFO channels for high-speed data streaming
  • Industrial gateway converting a single USB connection to four RS-232/RS-485 serial ports
  • Embedded system test fixture with SPI, I2C, JTAG, and UART interfaces from one USB connection
  • Robotics controller with multi-UART bridge for motor drivers, GPS, telemetry, and debug console
Alternative Models: What chips are recommended as replacements for FT4232HL-TRAY
Model Manufacturer Key Difference
FT2232HL FTDI Dual-channel version (2 UART/FIFO/MPSSE)
FT232HL FTDI Single-channel Hi-Speed UART/FIFO bridge
CH9102F WCH Single-channel USB to UART, lower cost
CP2105 Silicon Labs Dual-channel USB to UART bridge
TUSB3410 TI Single USB-to-UART bridge with embedded 8052

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1