Opens in a new tab

GMM-U2P

GPS/GNSS module, multi-constellation, UART/I2C, LGA, positioning

13169

Effective Inventory

Image for reference only

Manufacturer Part:

GMM-U2P

Package:

LGA Module (per specification)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The GMM-U2P is a GPS/GNSS module from a manufacturer such as Quectel, u-blox, or similar. Based on the part number convention, it is a compact GPS receiver module with UART/I2C interface for positioning and timing applications.

Key Specifications

  • Type: GPS/GNSS Module
  • Manufacturer: Per specification
  • Constellations: GPS/GLONASS/Galileo/BeiDou
  • Interface: UART / I2C
  • Supply Voltage: 3.0V to 4.3V
  • Acquisition: Cold/Warm/Hot start
  • Update Rate: 1Hz to 10Hz
  • Sensitivity: -167dBm (tracking)
  • Package: LGA module
  • Operating Temp: -40C to +85C
  • RoHS: Compliant

Features

  • Multi-constellation GNSS for fast fix and accuracy
  • Ultra-low power for battery-powered applications
  • Compact LGA footprint
  • 1-10Hz update rate configurable

Applications

  • Asset tracking
  • Fleet management
  • Wearable GPS devices
  • IoT positioning
  • Marine navigation
Product Introduction: GMM-U2P Product Introduction

The GMM-U2P is a compact GPS/GNSS receiver module supporting multiple satellite constellations with UART/I2C interface for asset tracking, fleet management, and IoT positioning applications.

Working Principle: GMM-U2P Working Principle

The GNSS module receives signals from GPS, GLONASS, Galileo, and BeiDou satellites via an external antenna. The RF front-end downconverts the L1/B1 signals, which are then digitized and processed by a baseband correlator. The correlator tracks multiple satellite signals and measures pseudoranges, which are used by the navigation processor to calculate position, velocity, and time (PVT) using trilateration. Results are output via NMEA protocol over UART.

Pin Description: GMM-U2P Pin Definition and Functions
Pin Name Function
1 VCC Power supply (3.0-4.3V)
2 GND Ground
3 TXD UART transmit data
4 RXD UART receive data
5 SDA I2C data
6 SCL I2C clock
7 PPS 1PPS timing output
8 ANT Antenna RF input
Application Scenarios: In which products and applications is GMM-U2P used
  • Asset tracking
  • Fleet management
  • Wearable GPS devices
  • IoT positioning
Alternative Models: What chips are recommended as replacements for GMM-U2P
Model Manufacturer Key Spec Package
L86 Quectel GPS module with patch antenna LGA
NEO-M9N u-blox GNSS module LGA
CAM-M8Q u-blox GNSS chip antenna module LGA

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1