Opens in a new tab

GRM188R71C104KA01D

0.1uF 16V X7R MLCC, 0603, +/-10%, decoupling, Murata GRM series

3336

Effective Inventory

Image for reference only

Manufacturer Part:

GRM188R71C104KA01D

Package:

0603 (1.60 x 0.80 x 0.80 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The GRM188R71C104KA01D from Murata is a 0.1uF, 16V, +/-10% X7R multilayer ceramic capacitor (MLCC) in a 0603 package. With stable temperature characteristics (+/-10% over -55C to +125C), it is the industry-standard decoupling capacitor for digital ICs.

Key Specifications

Capacitance 0.1 uF (100 nF)
Rated Voltage 16 V DC
Tolerance +/-10% (K)
Temperature Characteristic X7R (+/-10% over -55C to +125C)
Dissipation Factor 2.5% (max at 1kHz, 1Vrms)
Insulation Resistance 10 GOhm-uF (min)

Features

  • 0.1uF industry-standard decoupling capacitance value
  • X7R temperature characteristic for stable capacitance over temperature
  • 16V rating suitable for 3.3V and 5V power rails
  • 0603 compact footprint for high-density PCB layout
  • Low ESR and ESL for effective high-frequency decoupling
  • Murata GRM series with proven reliability and quality

Applications

  • Power supply decoupling for digital ICs and microcontrollers
  • Noise filtering on signal lines and I/O interfaces
  • Timing capacitor for RC oscillators and delay circuits
  • AC coupling and DC blocking in signal paths
Product Introduction: GRM188R71C104KA01D Product Introduction

The GRM188R71C104KA01D from Murata is a 0.1uF (100nF), 16V DC, +/-10% tolerance, X7R multilayer ceramic capacitor (MLCC) in a 0603 (1608 metric) surface-mount package. The 0.1uF value is the most widely used decoupling capacitance in digital electronics, placed near IC power pins to provide local charge storage and suppress supply voltage transients. The X7R dielectric provides capacitance stability of +/-10% over the full -55C to +125C temperature range, ensuring consistent decoupling performance across operating conditions. The 16V DC rating provides adequate margin for 3.3V and 5V power rails. The 0603 package size offers an optimal balance between miniaturization and PCB assembly ease. The MLCC construction provides inherently low equivalent series resistance (ESR) and low equivalent series inductance (ESL), enabling effective high-frequency noise suppression above 10MHz. Murata’s GRM series is one of the industry’s most widely specified MLCC product lines with extensive qualification data.

Working Principle: GRM188R71C104KA01D Working Principle

The GRM188R71C104KA01D uses X7R dielectric ceramic layers for energy storage. (1) MLCC Structure: Multiple thin layers of X7R ceramic dielectric are interleaved with inner electrode layers (typically nickel). The alternating electrodes connect to opposite terminations, creating many parallel capacitor cells within a single package. More layers and thinner dielectric layers increase capacitance in a given volume. (2) X7R Dielectric: The X7R formulation is based on barium titanate (BaTiO3) with additives to stabilize the capacitance over temperature. The ‘X7R’ designation means: X = -55C low temperature, 7 = +125C high temperature, R = +/-10% capacitance change over that range. (3) Decoupling: At high frequencies (above 10MHz), the MLCC’s low ESR and ESL provide a low-impedance path for transient current demands from the IC. The capacitor acts as a local energy reservoir, supplying charge during fast current transients and preventing supply voltage droop. (4) DC Bias Effect: X7R capacitors exhibit capacitance reduction with applied DC voltage due to the ferroelectric nature of barium titanate. At 16V rated voltage, the effective capacitance at full rated voltage may be 30-50% lower than the nominal value.

Pin Description: GRM188R71C104KA01D Pin Definition and Functions
Pin Name Type Function
1 Terminal 1 Termination Capacitor terminal (no polarity)
2 Terminal 2 Termination Capacitor terminal (no polarity)
Application Scenarios: In which products and applications is GRM188R71C104KA01D used
  • Power supply decoupling for digital ICs and microcontrollers at 0.1uF
  • Noise filtering on signal lines and I/O interfaces with low ESR/ESL
  • Timing capacitor for RC oscillators and delay circuits in 0603 footprint
  • AC coupling and DC blocking in signal paths with X7R stability
Alternative Models: What chips are recommended as replacements for GRM188R71C104KA01D
Manufacturer Part Number Package Notes
Samsung CL10B104KB8NNNC 0603 0.1uF 50V, equivalent
TDK C1608X7R1C104K080AC 0603 0.1uF 16V, equivalent
Yageo CC0603KRX7R9BB104 0603 0.1uF 50V, equivalent
KEMET C0603C104K5RACTU 0603 0.1uF 50V, equivalent

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1