Opens in a new tab

H26M41204HPR

4GB eMMC 5.1, HS400, 1.8/3.3V, integrated controller, FBGA-153, -25~85°C

3456

Effective Inventory

Image for reference only

Manufacturer Part:

H26M41204HPR

Package:

FBGA-153 (11.5 x 13 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The H26M41204HPR is a 4GB eMMC (embedded Multi-Media Card) from SK Hynix operating at 1.8V/3.3V I/O with eMMC 5.1 standard and HS400 mode support. The H26M prefix identifies SK Hynix eMMC products. It integrates NAND Flash memory and an intelligent controller in a single FBGA-153 package, providing built-in ECC, wear leveling, and bad block management.

Key Specifications

Density 4GB (32Gbit)
Standard eMMC 5.1
Supply Voltage VCC: 3.3V, VCCQ: 1.8V/3.3V
Interface eMMC (8-bit DAT bus)
Max Mode HS400 (400 MB/s)
Operating Temp -25°C to +85°C
Package FBGA-153 (11.5x13mm)
Part Status Active

Features

  • 4GB eMMC 5.1 with integrated controller
  • HS400 mode: 400 MB/s max throughput
  • Built-in ECC, wear leveling, bad block management
  • Field firmware update (FFU) support
  • Command queuing for random I/O
  • No external NAND controller needed

Applications

  • Smartphone and tablet storage
  • Automotive infotainment
  • Industrial SBC and IoT gateway
  • Consumer electronics OS storage
Product Introduction: H26M41204HPR Product Introduction

The H26M41204HPR is a 4GB eMMC 5.1 from SK Hynix integrating NAND Flash and controller in a single FBGA-153 package. HS400 mode provides up to 400 MB/s throughput. Built-in ECC, wear leveling, and bad block management eliminate the need for an external NAND controller, simplifying system design. The 4GB capacity is suitable for embedded Linux, Android Go, and IoT gateway applications.

Working Principle: H26M41204HPR Working Principle

The eMMC integrates a NAND Flash array and intelligent controller. The controller manages ECC (error correction), wear leveling (distributes writes), and bad block management (maps out failures). Host accesses storage via eMMC command protocol (CMD/DAT bus). HS400 uses DDR signaling on 8-bit DAT bus at 200 MHz for 400 MB/s peak. 1.8V VCCQ reduces I/O power at high speeds.

Pin Description: H26M41204HPR Pin Definition and Functions
Pin Group Interface Function
DAT0-DAT7 I/O 8-bit data bus
CMD I/O Command/response
CLK Input Clock from host
DS Output Data strobe (HS400)
RST_n Input Hardware reset
Application Scenarios: In which products and applications is H26M41204HPR used
  • Embedded Linux rootfs storage (4GB)
  • Automotive infotainment system
  • IoT gateway OS + app storage
  • Consumer electronics main storage
Alternative Models: What chips are recommended as replacements for H26M41204HPR
Manufacturer Part Number Package Notes
Samsung KLM4G1YEND-B041 FBGA-153 4GB eMMC 5.1 alternative
Micron MTFC4GACQAM-4K-AIT FBGA-153 4GB eMMC 5.1 alternative
Kioxia THGBMJG6C8BBAIJ FBGA-153 32GB larger alternative

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4019PBF

150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 2409pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MSP430F247TPMR

TI MSP430 MCU, 16-bit RISC, 92KB Flash, 8KB RAM, 16MHz, LQFP-64

Package: See datasheet

IN STOCK: 13371pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1