Opens in a new tab

HCPL2530SD

Dual high-speed optocoupler, 10MBd, totem-pole output, 5kVrms, SOIC-8

2971

Effective Inventory

Image for reference only

Manufacturer Part:

HCPL2530SD

Package:

SOIC-8 (5.85 x 7.5 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The HCPL2530SD from Broadcom is a dual-channel high-speed optocoupler with totem-pole output, designed for high-speed logic interface and IPM inverter isolation at 10 MBd data rate.

Key Specifications

Manufacturer Broadcom
Channels 2
Data Rate 10 MBd
Isolation Voltage 5000 Vrms
CTR 20% min @ IF=16mA
Propagation Delay 0.5 µs max
Output Type Totem-pole
Supply Voltage 4.5V to 20V
Package SOIC-8 (SMD)
Operating Temperature -40°C to +85°C
Safety UL, CSA, VDE

Features

  • Dual-channel high-speed optocoupler
  • 10 MBd data rate
  • Totem-pole output (active pull-up)
  • 5000 Vrms isolation
  • Low propagation delay: 0.5 µs
  • Logic gate output compatible
  • UL/CSA/VDE approved

Applications

  • IPM inverter isolation
  • High-speed logic interface
  • Servo motor drive isolation
  • Switching power supply
Product Introduction: HCPL2530SD Product Introduction

The HCPL2530SD from Broadcom is a dual-channel high-speed optocoupler with totem-pole output, rated for 10 MBd data rate and 5000 Vrms isolation. The active totem-pole output provides faster switching than open-collector types, making it suitable for IPM inverter gate drive isolation. Each channel has a GaAsP LED optically coupled to an integrated photodetector with logic gate output.

Working Principle: HCPL2530SD Working Principle

Each channel uses a GaAsP LED coupled to a photodiode and amplifier IC. The photodiode detects the LED light, and the amplifier converts it to a logic output. The totem-pole output stage provides active pull-up and pull-down, enabling faster switching. The integrated detector IC includes a Schmitt trigger for clean logic transitions.

Pin Description: HCPL2530SD Pin Definition and Functions
Pin Name Function
1 Anode 1 Ch1 LED anode
2 Cathode 1 Ch1 LED cathode
3 Anode 2 Ch2 LED anode
4 Cathode 2 Ch2 LED cathode
5 VO2 Ch2 output
6 GND2 Ch2 ground
7 VO1 Ch1 output
8 VCC Output supply
Application Scenarios: In which products and applications is HCPL2530SD used
  • IPM inverter gate drive isolation
  • High-speed logic interface isolation
  • Servo motor drive signal isolation
  • Switching power supply feedback
Alternative Models: What chips are recommended as replacements for HCPL2530SD
Manufacturer Part Number Notes
Broadcom HCPL2531SD Open-collector output
TI ISO7721DR Digital isolator alternative

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1