Opens in a new tab

INA195AIDBVR

Current shunt monitor, 80V, G=20, SOT-23-5

3480

Effective Inventory

Image for reference only

Manufacturer Part:

INA195AIDBVR

Package:

SOT-23-5 (2.9 x 1.6 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The INA195AIDBVR from Texas Instruments is a current shunt monitor with 80V common-mode range and fixed gain of 20 in a SOT-23-5 package. With 0.5% max gain error, 1mV max offset, and 250kHz bandwidth, it provides accurate current measurement for power supply and battery monitoring.

Key Specifications

Common-Mode Range -16V to +80V
Gain 20V/V (fixed)
Gain Error 0.5% max
Offset Voltage 1mV max
Bandwidth 250kHz
Supply Voltage 2.7V to 13.5V
Iq 700uA typical
Output Swing 50mV to (VS-100mV)
Operating Temp -40 to +125 C (I grade)
Package SOT-23-5 (2.9 x 1.6 mm)

Features

  • 80V wide common-mode range
  • Fixed gain of 20V/V with 0.5% accuracy
  • 1mV max offset voltage
  • 250kHz bandwidth for transient capture
  • 700uA low supply current
  • SOT-23-5 tiny package

Applications

  • Power supply current monitoring
  • Battery charge/discharge current sensing
  • Motor drive current feedback
  • Server rack power monitoring
Product Introduction: INA195AIDBVR Product Introduction

The INA195AIDBVR from Texas Instruments is a current shunt monitor with 80V common-mode range and fixed gain of 20 in a SOT-23-5 package. With 0.5% max gain error, 1mV max offset, and 250kHz bandwidth, it provides accurate current measurement for power supply and battery monitoring.

Working Principle: INA195AIDBVR Working Principle

The INA195AIDBVR operates as described in the product overview. Key subsystems include the input stage, processing/gain stage, output stage, and protection circuitry as detailed in the datasheet.

Pin Description: INA195AIDBVR Pin Definition and Functions
Pin Name Type Description
1 OUT Output Amplifier output
2 GND Power Ground
3 IN+ Input Non-inverting (shunt high side)
4 IN- Input Inverting (shunt low side)
5 VS Power Supply (2.7-13.5V)
Application Scenarios: In which products and applications is INA195AIDBVR used
  • Power supply current monitoring
  • Battery charge/discharge current sensing
  • Motor drive current feedback
  • Server rack power monitoring
Alternative Models: What chips are recommended as replacements for INA195AIDBVR
Model Manufacturer Package Notes
INA196AIDBVR TI SOT-23-5 Gain=50 version
INA197AIDBVR TI SOT-23-5 Gain=100 version
INA180A1IDBVR TI SOT-23-5 Gain=20, lower Vcm=26V
MAX9938TAUK+T ADI SOT-23-5 Gain=20, 28V

Recommend Parts

0751.0505

Schurter fuse, 0751.0505

Brand: schurter

Package: See datasheet

IN STOCK: 6768pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TL062CDR

Low-power JFET-input dual op-amp, 1MHz GBW, 30pA Ibias, SOIC-8, ±3.5V to ±18V

Brand: TI

Package: SOIC-8 (3.9 x 4.9 x 1.75mm)

IN STOCK: 11576pcs

Cargo cycle: 3-7 Days

The minimum order is 1

P89LPC922FN

8-bit 80C51 MCU, 8KB Flash, 256B RAM, 20-SSOP

Brand: NXP

Package: SSOP-20 (7.2 x 5.3 mm)

IN STOCK: 12628pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AC0603JR-070RL

Chip Resistor, 0Ω (Zero Ohm Jumper), ±5%, 0603 (1608 Metric), 1/10W (100mW)

Brand: Yageo

Package: 0603 (1608 Metric)

IN STOCK: 100000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

LMR34206FSC5RNXRQ1

42V 2A sync buck, 5V fixed, 2.2MHz, 18uA Iq, AEC-Q100, SOT-563

Brand: TI

Package: SOT-563 (1.6 x 1.2 x 0.55mm)

IN STOCK: 6500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AO3402

30V N-channel trench MOSFET, SOT-23, 4A, RDS(on) 52m ohm max @ 10V, Qg 10nC, 2.5V gate drive capable, -55C to +150C.

Brand: aosmd

Package: SOT-23 (2.9 x 1.6 x 1.25mm)

IN STOCK: 14066pcs

Cargo cycle: 3-7 Days

The minimum order is 1