Opens in a new tab

INA240A1EDRQ1

AEC-Q100 Current Sense Amp, 20V/V, -4V to 80V CM, Enhanced PWM Rejection, VSSOP-8

8765

Effective Inventory

Image for reference only

Manufacturer Part:

INA240A1EDRQ1

Package:

VSSOP-8 / MSOP-8 (4.9 x 3.0 x 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Other recommendations you may be interested in.

Description

Product Overview

The INA240A1EDRQ1 from Texas Instruments is an AEC-Q100 qualified, -4V to 80V bidirectional current sense amplifier with 20 V/V gain and enhanced PWM rejection, designed for motor drive and solenoid control.

Key Specifications

Type Automotive Current Sense Amplifier with Enhanced PWM Rejection
Gain 20 V/V
Common-Mode Voltage Range -4 V to +80 V
Supply Voltage 2.7 V to 5.5 V
Offset Voltage +/-25 uV (max)
Gain Error 0.20% (max)
Offset Drift 250 nV/C (max)
Gain Error Drift 2.5 ppm/C (max)
DC CMRR 132 dB
AC CMRR @ 50kHz 93 dB
Bandwidth 400 kHz
Supply Current 2.4 mA (max)
Package VSSOP-8 (DGK)
Operating Temperature -40C to +125C (Grade 1)
AEC-Q100 Grade 1 qualified

Features

  • AEC-Q100 Grade 1 qualified (-40C to +125C)
  • -4V to +80V common-mode range (below ground capable)
  • Enhanced PWM rejection for motor drive applications
  • 132 dB DC CMRR for precision measurement
  • +/-25 uV max offset voltage (zero-drift architecture)
  • 0.20% max gain error
  • Functional safety documentation available
  • Bidirectional current sensing with REF pins

Applications

  • Motor drive current sensing with PWM
  • Electronic power steering torque sensing
  • Solenoid and valve current control
  • Battery management system current monitoring
Product Introduction: INA240A1EDRQ1 Product Introduction

The INA240A1EDRQ1 from Texas Instruments is an automotive-qualified bidirectional current sense amplifier with a fixed gain of 20 V/V. The device features an exceptional -4 V to +80 V common-mode voltage range that operates independently of the 2.7-5.5 V supply, enabling current measurement on high-side and low-side shunts as well as below-ground sensing during solenoid flyback periods. The enhanced PWM rejection circuitry suppresses large common-mode transients (dV/dt) from motor drive PWM signals, eliminating output ripple artifacts that plague conventional current sense amplifiers. The zero-drift architecture delivers +/-25 uV max offset voltage with 250 nV/C drift, enabling accurate measurement of very small shunt voltages (down to 10 mV full-scale). AEC-Q100 Grade 1 qualification ensures reliability in automotive environments.

Working Principle: INA240A1EDRQ1 Working Principle

The INA240A1EDRQ1 uses a zero-drift (chopper-stabilized) architecture where the input offset and 1/f noise are continuously corrected by modulating the input signal at a high frequency, passing it through the amplifier, and then demodulating the output. This auto-correction cycle eliminates offset drift and low-frequency noise, achieving +/-25 uV max offset over temperature. The enhanced PWM rejection circuit consists of a specialized input filter and common-mode detection stage that identifies rapid common-mode transitions (such as PWM switching edges) and applies additional suppression during these events. Two reference pins (REF1, REF2) allow setting the output baseline voltage for bidirectional sensing: the output voltage equals VREF + Gain x (IN+ – IN-). The -4 V negative common-mode capability is achieved through a charge-pump circuit that biases the input stage below ground, accommodating the negative flyback voltage across inductive loads.

Pin Description: INA240A1EDRQ1 Pin Definition and Functions
Pin Name Type Function
1 IN- Input Inverting input (shunt low side)
2 IN+ Input Non-inverting input (shunt high side)
3 VS Power Supply voltage (2.7-5.5V)
4 GND Ground Ground
5 REF2 Input Reference voltage input 2
6 REF1 Input Reference voltage input 1
7 OUT Output Amplifier output
8 NC – No connect
Application Scenarios: In which products and applications is INA240A1EDRQ1 used
  • Three-phase BLDC motor phase current sensing with PWM inverter rejection
  • Electric power steering motor current feedback loop
  • 48V battery management system high-side current measurement
  • Solenoid driver current monitoring with negative flyback common-mode
Alternative Models: What chips are recommended as replacements for INA240A1EDRQ1
Manufacturer Part Number Package Notes
TI INA240A2EDRQ1 VSSOP-8 50 V/V gain version
TI INA240A3EDRQ1 VSSOP-8 100 V/V gain version
TI INA240A4EDRQ1 VSSOP-8 200 V/V gain version
TI INA293A1QDRQ1 VSSOP-8 Similar, -4V to 110V CM
ADI AD8418AWHRZ SOIC-8 Automotive, 0-80V CM, 20V/V

Recommend Parts

MCP6S26-I

6-channel PGA, SPI interface, gains 1-32V/V, 10MHz BW, rail-to-rail, 2.5-5.5V, SOIC-14

Brand: MICROCHIP

Package: SOIC-14 (150 mils body width)

IN STOCK: 6800pcs

Cargo cycle: 3-7 Days

The minimum order is 1

W25Q80VSSI

8Mbit Serial Flash, Quad SPI, 104MHz, SOIC-8, 2.7-3.6V

Brand: Winbond

Package: SOIC-8 208mil (5.3×8.0mm)

IN STOCK: 4316pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MM3Z9V1

9.1V 200mW Zener diode, SOD-323, onsemi/Diotec

Brand: ON

Package: SOD-323 (2.5 x 1.25 x 0.85 mm)

IN STOCK: 10735pcs

Cargo cycle: 3-7 Days

The minimum order is 1

AT89S51

8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package: PDIP-40 / TQFP-44 / PLCC-44

IN STOCK: 15000pcs

Cargo cycle: 3-7 Days

The minimum order is 1

GD32F303CBT6

Cortex-M4 32-bit MCU, 120MHz, 128KB Flash, 32KB SRAM, LQFP-48

Brand: gigadevice

Package: LQFP-48 (7x7mm, 0.5mm pitch)

IN STOCK: 3342pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MIC5205-3.3YM5-TR

3.3V 150mA ultra-low-noise LDO, 165mV dropout, 30uVrms noise, SOT-23-5

Brand: MICROCHIP

Package: SOT-23-5 (2.9 x 1.6 x 1.1mm)

IN STOCK: 9858pcs

Cargo cycle: 3-7 Days

The minimum order is 1