Opens in a new tab

IR21094STRPBF

Infineon IR21094STRPBF half-bridge gate driver with OCP, 600V, 200mA/350mA, SOIC-8

7420

Effective Inventory

Image for reference only

Manufacturer Part:

IR21094STRPBF

Package:

SOIC-8

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The IR21094STRPBF is a high-voltage half-bridge gate driver IC from Infineon Technologies with integrated dead time and overcurrent protection. This 600V driver combines high-side and low-side drive channels in a single SOIC-8 package, designed for efficient and reliable power conversion applications.

Key Specifications

Manufacturer Infineon Technologies
Device Type Half-Bridge Gate Driver w/ OCP
V_OFFSET 600 V (max)
Output Current (Source/Sink) 200 mA / 350 mA (typ)
Supply Voltage Range 10 V to 20 V
UVLO Threshold 8.6 V (on) / 8.2 V (off)
Dead Time 520 ns (typ, internal)
Overcurrent Protection Yes, fault output
Input Logic CMOS / LSTTL compatible
Package SOIC-8
Operating Temperature -40°C to +125°C

Features

  • 600V floating high-side channel (bootstrap)
  • Integrated overcurrent protection (FAULT output)
  • Internal dead time (520ns) prevents shoot-through
  • dV/dt and negative transient tolerant
  • Gate drive supply: 10V to 20V
  • Undervoltage lockout (UVLO)
  • CMOS Schmitt-trigger inputs
  • Matched propagation delay
  • RoHS compliant, compact SOIC-8

Applications

  • Motor drives and inverters
  • Switch-mode power supplies
  • Half-bridge resonant converters
  • UPS systems
  • Ballast and lighting control
  • Industrial power systems
  • DC-DC converters
Product Introduction: IR21094STRPBF Product Introduction

The IR21094STRPBF is a high-voltage half-bridge gate driver with integrated overcurrent protection from Infineon Technologies. This device provides a compact and reliable solution for driving N-channel power MOSFETs and IGBTs in half-bridge configurations, with the added benefit of built-in overcurrent protection with fault reporting. The floating high-side channel uses bootstrap operation and is rated for up to 600V offset voltage. Internal dead time of approximately 520ns ensures safe operation by preventing simultaneous conduction of both power switches. The device’s overcurrent protection feature monitors the voltage across the current sense element and triggers a fault condition when exceeded, providing system-level protection without additional components.

Working Principle: IR21094STRPBF Working Principle

The IR21094STRPBF operates as a half-bridge gate driver with integrated overcurrent protection. The LIN input controls both the high-side and low-side outputs with complementary switching and internal dead time. When LIN is high, the low-side output (LO) is high and the high-side output (HO) is low. When LIN goes low, after the dead time, LO goes low and HO goes high. The overcurrent protection works via the ITrip pin, which monitors a current sense resistor or diode drop. When the voltage at ITrip exceeds the threshold, the driver enters a fault state where both outputs are forced low, and the FLT pin goes low to indicate the fault condition. The fault auto-clears after a reset timeout period.

Pin Description: IR21094STRPBF Pin Definition and Functions
Pin Number Pin Name Function
1 VB High-Side Floating Supply (Bootstrap)
2 HO High-Side Gate Drive Output
3 VS High-Side Floating Return
4 FLT Fault Output (Open Drain, Active Low)
5 COM Common / Ground
6 LO Low-Side Gate Drive Output
7 VCC Low-Side Power Supply (10-20V)
8 LIN Logic Input

Note: ITrip function is accessed through the FLT pin with internal current sense.

Application Scenarios: In which products and applications is IR21094STRPBF used
  • AC motor drives and servo systems
  • Switch-mode power supplies with protection
  • Half-bridge and LLC resonant converters
  • Uninterruptible power supplies
  • Electronic ballasts and lighting
  • Industrial power conversion
  • Isolated DC-DC converters
Alternative Models: What chips are recommended as replacements for IR21094STRPBF
Model Manufacturer Description
IR2109STRPBF Infineon Half-bridge driver without OCP
IR2015STRPBF Infineon Ballast controller with driver
UCC27211 TI Alternative 100V half-bridge driver

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4019PBF

150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 2409pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1