Opens in a new tab

IR2110PBF

500V high-low side gate driver, 2.5A, bootstrap, PDIP-14

3097

Effective Inventory

Image for reference only

Manufacturer Part:

IR2110PBF

Package:

PDIP-14 (19.3×6.35×4.57 mm, 2.54mm pitch, through-hole)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The IR2110PBF from Infineon Technologies (formerly International Rectifier) is a 500V high and low side gate driver IC with independent output channels for driving N-channel MOSFETs or IGBTs. Featuring 2.5A source/sink output current, 120 ns propagation delay, bootstrap floating channel operation, undervoltage lockout on both channels, and 3.3V logic-compatible inputs with Schmitt triggers in a PDIP-14 package. The matched propagation delays simplify high-frequency half-bridge and full-bridge applications.

Key Specifications

Configuration High and low side (half-bridge)
Voltage Class 500V (offset)
Output Current (source/sink) 2.5A / 2.5A peak
Gate Drive Supply (VCC/VBS) 10V to 20V
Logic Supply (VDD) 3.3V to 20V
Propagation Delay (on/off) 120 ns / 94 ns typical
Delay Matching 10 ns max (IR2110)
Rise/Fall Time 25 ns / 17 ns typical
UVLO Threshold (VBS) 8.6V typical (positive going)
UVLO Threshold (VCC) 8.5V typical (positive going)
Quiescent Current (VBS) 125 µA typical
Logic Input Compatibility CMOS/LSTTL, down to 3.3V
Operating Temperature -40°C to +150°C (junction)
Package PDIP-14 (through-hole)

Features

  • Floating channel for bootstrap operation up to 500V
  • dV/dt immune for rugged high-side operation
  • Undervoltage lockout on both channels
  • 3.3V logic-compatible inputs with CMOS Schmitt triggers
  • Cycle-by-cycle edge-triggered shutdown logic (SD pin)
  • Matched propagation delays for both channels
  • Outputs in phase with inputs
  • Logic and power ground ±5V offset tolerance

Applications

  • Switch-mode power supplies (half-bridge, full-bridge)
  • Motor drives (BLDC, AC induction, stepper)
  • Inverters (solar, UPS, welding)
  • Induction heating and high-intensity discharge lamp ballasts
  • Class-D audio amplifiers
Product Introduction: IR2110PBF Product Introduction

The IR2110PBF from Infineon is a 500V high and low side gate driver IC with 2.5A peak output current, bootstrap floating channel operation, undervoltage lockout on both channels, and 3.3V logic-compatible Schmitt-trigger inputs in a PDIP-14 package. With 120 ns propagation delay and matched channel delays, it is ideal for half-bridge/full-bridge SMPS, motor drives, inverters, and Class-D audio amplifiers.

Working Principle: IR2110PBF Working Principle

The IR2110PBF uses Infineon’s proprietary HVIC (High Voltage Integrated Circuit) and latch-immune CMOS technology. The high-side channel uses a level-shifting circuit to translate ground-referenced logic signals to the floating reference of the high-side MOSFET source. A bootstrap circuit (external diode and capacitor) provides the floating supply voltage (VB-VS) for the high-side driver. When the low-side MOSFET is on, VS is near ground and the bootstrap capacitor charges through the external diode. When the high-side output turns on, VS rises and the bootstrap capacitor maintains the gate drive voltage above VS. The undervoltage lockout (UVLO) monitors both VBS and VCC, disabling the respective output if the supply drops below 8.6V, preventing partially-enhanced MOSFET operation. The SD (shutdown) pin provides cycle-by-cycle edge-triggered shutdown that disables both outputs, useful for overcurrent protection. Matched propagation delays (10 ns max difference) ensure symmetric switching in bridge configurations.

Pin Description: IR2110PBF Pin Definition and Functions
Pin Name Type Function
1 VB Power High-side floating supply (bootstrap capacitor)
2 HO Output High-side gate drive output
3 VS Power High-side floating return (connect to switch node)
4 COM Power Low-side return (power ground)
5 LO Output Low-side gate drive output
6 VCC Power Low-side fixed supply (10-20V)
7 NC — No connect
8 NC — No connect
9 VDD Power Logic supply (3.3-20V)
10 HIN Input High-side logic input (in phase with HO)
11 SD Input Shutdown input (active high, edge-triggered)
12 LIN Input Low-side logic input (in phase with LO)
13 VSS Power Logic ground
14 NC — No connect
Application Scenarios: In which products and applications is IR2110PBF used
  • Half-bridge and full-bridge switch-mode power supplies
  • Motor drives: BLDC, AC induction, stepper motor inverters
  • Solar inverters, UPS, and welding inverters
  • Induction heating and HID lamp ballast circuits
  • Class-D audio amplifier output stages
Alternative Models: What chips are recommended as replacements for IR2110PBF
Manufacturer Part Number Package Notes
Infineon IR2110SPBF SOIC-16W Surface mount version of IR2110
Infineon IR2113PBF PDIP-14 600V version, 20ns delay matching
Infineon IRS2186SPBF SOIC-16 4A output, 600V, higher drive
TI UCC27714DR SOIC-14 600V, 4A, modern alternative
Microchip MIC4103YM-TR SOIC-14 100V, 4A, motor driver

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1