Opens in a new tab

IR21531STRPBF

Infineon IR21531STRPBF self-oscillating half-bridge driver, 600V, 180mA/260mA, SOIC-8

1097

Effective Inventory

Image for reference only

Manufacturer Part:

IR21531STRPBF

Package:

SOIC-8

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The IR21531STRPBF is a self-oscillating 600V half-bridge gate driver IC from Infineon Technologies. With integrated oscillator and both high-side and low-side drivers in a SOIC-8 package, this device provides a compact solution for half-bridge resonant converters, lamp ballasts, and switch-mode power supplies.

Key Specifications

Manufacturer Infineon Technologies
Device Type Self-Oscillating Half-Bridge Driver
V_OFFSET 600 V (max)
Output Current (Source/Sink) 180 mA / 260 mA (typ)
Oscillator Frequency Range Programmable via RT/CT
Dead Time 0.6 µs (typ)
VCC Zener Clamp 15.4 V (typ)
Micropower Startup Yes
Shutdown Feature CT pin, non-latched
Package SOIC-8
Operating Temperature -40°C to +125°C

Features

  • Integrated 600V half-bridge driver
  • CT/RT programmable oscillator (555-like)
  • 15.4V Zener clamp on VCC
  • Micropower startup current
  • Non-latched shutdown on CT pin
  • Internal bootstrap FET (IRS21531D variant)
  • Internal dead time: 0.6µs typical
  • dV/dt immunity: 50 V/ns
  • RoHS compliant, SOIC-8 package

Applications

  • Electronic lamp ballasts
  • Half-bridge resonant converters
  • DC-DC converters
  • EV charging systems
  • Power tools
  • Motor control
  • Domestic robotics
  • Switch-mode power supplies
Product Introduction: IR21531STRPBF Product Introduction

The IR21531STRPBF is an improved version of the popular IR2153 self-oscillating half-bridge gate driver from Infineon Technologies. This device incorporates a high-voltage half-bridge gate driver with a front-end oscillator similar to the industry-standard CMOS 555 timer, all in a single SOIC-8 package. Compared to previous generations, the IR21531 features better noise immunity through lower peak di/dt gate drivers and increased UVLO hysteresis. A shutdown feature on the CT pin allows both gate driver outputs to be disabled with a low-voltage control signal. The device maintains constant HO and LO pulse widths at startup for more stable frequency vs time profile. With micropower startup and 15.4V Zener clamp on VCC, the IR21531S is ideal for offline half-bridge applications including electronic ballasts and resonant converters.

Working Principle: IR21531STRPBF Working Principle

The IR21531STRPBF integrates an RT/CT programmable oscillator with a high-voltage half-bridge driver. The oscillator operates similarly to a 555 timer, with the timing capacitor (CT) charging between 1/3 and 2/3 of VCC through the timing resistor (RT). The oscillator alternately drives the high-side (HO) and low-side (LO) outputs with approximately 50% duty cycle. Internal dead time of approximately 0.6µs prevents shoot-through. The high-side driver uses bootstrap technique to operate at up to 600V offset voltage. The CT pin doubles as a shutdown input – pulling CT below 1/6 VCC disables both outputs. Micropower startup circuitry allows the device to be powered directly from the high-voltage bus through a startup resistor.

Pin Description: IR21531STRPBF Pin Definition and Functions
Pin Number Pin Name Function
1 VCC Supply Voltage (with 15.4V Zener clamp)
2 HO High-Side Gate Drive Output
3 VB Floating High-Side Supply (Bootstrap)
4 RT Oscillator Timing Resistor
5 CT Oscillator Timing Capacitor / Shutdown
6 SD/SD Shutdown Pin (variant dependent)
7 COM Common / Ground
8 LO Low-Side Gate Drive Output

Note: Pinout follows standard IR215x half-bridge driver convention with RT/CT oscillator pins.

Application Scenarios: In which products and applications is IR21531STRPBF used
  • Compact fluorescent lamp (CFL) ballasts
  • Half-bridge resonant LLC converters
  • DC-DC converter topologies
  • EV charging power stages
  • Power tool motor drives
  • Motor control circuits
  • Domestic appliance power modules
  • Offline switch-mode power supplies
Alternative Models: What chips are recommended as replacements for IR21531STRPBF
Model Manufacturer Description
IR2153STRPBF Infineon Standard IR2153 version
IRS21531DSTRPBF Infineon With integrated bootstrap diode
IR2156STRPBF Infineon Full ballast controller version

Recommend Parts

ISL95855HRTZ-T

IMVP8 3+2+1 phase buck controller, R3 technology, 4.5-25V input, 48-TQFN

Brand: Renesas

Package: 48-TQFN (6×6 mm, exposed pad)

IN STOCK: 2156pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4019PBF

150V N-Channel HEXFET Power MOSFET, 47A, 34 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 2409pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

PIC32MX795F512L-80I/PF

32-bit PIC32MX MCU with Ethernet/CAN/USB, 80MHz, 512KB Flash, TQFP-100, industrial

Brand: MICROCHIP

Package: TQFP-100 (14 x 14 mm)

IN STOCK: 7912pcs

Cargo cycle: 3-7 Days

The minimum order is 1