Opens in a new tab

IRF840PBF

N-Channel MOSFET, 500V, 8A, 0.85 Ohm, TO-220AB

10940

Effective Inventory

Image for reference only

Manufacturer Part:

IRF840PBF

Package:

TO-220AB (10.54 x 4.69 x 15.24 mm, through-hole)

Brand:

Product Categories:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The IRF840PBF from Infineon is an N-channel power MOSFET rated at 500V VDSS with 8A drain current and 0.85 Ohm RDS(on). In TO-220AB package, this HEXFET device is widely used in high-voltage switching applications.

Key Specifications

VDSS 500V
ID 8A @ TC=25C
RDS(on) 0.85 Ohm max
VGS(th) 2.0 to 4.0V
Qg 63nC typical
PD 125W @ TC=25C
Package TO-220AB

Features

  • HEXFET power MOSFET technology
  • 500V breakdown for off-line applications
  • Fully avalanche rated
  • Dynamic dv/dt rated
  • Lead-free, RoHS compliant

Applications

  • Switch-mode power supplies
  • Motor drive inverters
  • High-voltage DC-DC converters
  • Power factor correction circuits
Product Introduction: IRF840PBF Product Introduction

The IRF840PBF is a classic N-channel enhancement-mode power MOSFET from the Infineon HEXFET family. With 500V drain-source rating and 8A continuous current, it is a workhorse device in off-line SMPS, motor drives, and power conversion systems. The 0.85 Ohm on-resistance and 63nC gate charge suit moderate-frequency switching. TO-220AB package provides 125W dissipation when heatsinked.

Working Principle: IRF840PBF Working Principle

The IRF840PBF operates as a voltage-controlled N-channel MOSFET. (1) Off: No channel exists when VGS is below threshold, blocking up to 500V. (2) On: VGS above threshold creates inversion layer, RDS(on) = 0.85 Ohm max. (3) Switching: Qg=63nC must be supplied/removed for transitions. (4) Avalanche: Fully rated to absorb inductive kickback energy without external clamping.

Pin Description: IRF840PBF Pin Definition and Functions
Pin Name Function
1 Gate Gate control input
2 Drain Drain terminal (tab)
3 Source Source terminal
Application Scenarios: In which products and applications is IRF840PBF used
  • Off-line SMPS: 500V rating for 110V/220V AC-input power supplies
  • Motor drive: 8A capability for small BLDC/PMSM motors
  • HV DC-DC converters: Forward and flyback topologies for telecom power
  • Lighting ballasts: High-voltage fluorescent and HID lamp circuits
Alternative Models: What chips are recommended as replacements for IRF840PBF
Manufacturer Part Number Package Notes
Infineon IRF840LPBF D2PAK SMD version
ST STW8NM50 TO-247 500V, 8A, lower RDS(on)
Vishay IRF840A TO-220AB Direct equivalent
Infineon IRFP460PBF TO-247 500V, 20A, higher current

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1