Opens in a new tab

IS25LP016D-JNLE-TR

16Mbit SPI NOR Flash, 3V, QSPI/QPI, 133MHz, DTR, SOIC-8 150mil, -40 to 105C, TR

11082

Effective Inventory

Image for reference only

Manufacturer Part:

IS25LP016D-JNLE-TR

Package:

8-SOIC (4.90 x 3.90 x 1.75 mm, 150mil)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The IS25LP016D-JNLE-TR is a ISSI product designed for electronic applications. It features compact design with reliable performance characteristics suitable for various industrial and consumer applications.

Key Specifications

Memory Type SPI NOR Flash
Density 16Mbit (2MB)
Organization 2M x 8
Interface SPI / Dual I/O / Quad I/O / QPI / DTR
Max Clock Frequency 133 MHz
DTR Mode Clock 66 MHz
Supply Voltage 2.3V to 3.6V (3V Typ)
Active Read Current 4 mA (Typ)
Standby Current 5 uA (Typ)
Deep Power Down 1 uA (Typ)
Page Size 256 bytes
Sector/Block Size 4KB / 32KB / 64KB uniform
Program/Erase Cycles 100,000
Data Retention 20 Years
Operating Temperature -40 C to +105 C (Extended)
Package 8-SOIC (150mil / 3.90mm width)
Packaging Tape and Reel (3000 units)
Security 4x256B OTP, 128-bit Unique ID, Power Supply Lock

Features

16Mbit SPI NOR Flash with 3V supply (2.3-3.6V); Supports Standard/Dual/Quad SPI, QPI, and DTR modes; 133MHz clock in Quad I/O; 66MHz DTR for 532 Mbps throughput; Uniform 4KB/32KB/64KB sector/block erase; Program/Erase Suspend and Resume; AutoBoot operation; Configurable drive strength and dummy cycles; QPI mode with 2-cycle instruction; 4×256-byte OTP security area; 128-bit unique ID; Power supply lock protection; Deep power down (1uA); SFDP support; Extended temperature to +105C; Industry-standard SOIC-8 pinout; Tape and reel packaging

Applications

Embedded code storage (XIP); FPGA configuration; IoT devices and sensors; Industrial control systems; Consumer electronics; Smart meters; Communication modules; Automotive body electronics

Product Introduction: IS25LP016D-JNLE-TR Product Introduction

The IS25LP016D-JNLE-TR from ISSI is a 16Mbit (2MB) SPI NOR Flash memory device operating at 3V (2.3V to 3.6V), designed for code and data storage in cost-sensitive embedded applications. The LP designation indicates the 3V voltage family, distinguishing it from the 1.8V WP series. Despite its compact density, the device supports the full range of ISSI SPI interfaces including Standard SPI, Dual I/O, Quad I/O, QPI, and DTR modes, achieving up to 532 Mbps equivalent throughput in QPI mode at 133MHz. The JNLE package code specifies the 8-contact SOIC-8 (150mil / 3.9mm width) package, providing a widely available and cost-effective package choice. The -TR suffix indicates tape and reel packaging with 3000 units per reel for automated SMT production. The device features uniform 4KB, 32KB, and 64KB sector/block erase, program/erase suspend and resume, and AutoBoot for automatic data output after power-on. Security features include 4×256-byte OTP areas, a 128-bit unique device ID, and power supply lock protection. The extended temperature range of -40C to +105C makes it suitable for automotive and industrial environments.

Working Principle: IS25LP016D-JNLE-TR Working Principle

The IS25LP016D-JNLE-TR operates through a 4-wire serial peripheral interface (CS#, SCK, SI/IO0, SO/IO1, with WP#/IO2 and HOLD#/IO3 for multi-I/O modes). In Standard SPI mode, the host sends an 8-bit command followed by a 24-bit address on SI, and data is returned on SO. In Quad I/O mode, all four I/O pins transfer both addresses and data, quadrupling bandwidth. QPI mode uses 4-bit instruction encoding to reduce the command phase to just 2 clock cycles. DTR transfers data on both clock edges for double the per-pin data rate. The memory array is organized as 4KB uniform sectors, with 32KB and 64KB block erase options for efficient bulk operations. Programming loads 1 to 256 bytes into a page buffer before the internal state machine writes to the flash cells. Program/erase suspend allows interrupting a long erase operation to perform a read from a different sector, enabling real-time response in embedded systems. The AutoBoot feature automatically outputs a configured data block after power-on, reducing boot time by eliminating the command overhead. The HOLD# pin pauses serial communication without deselecting the device, useful for sharing the SPI bus with multiple devices.

Pin Description: IS25LP016D-JNLE-TR Pin Definition and Functions
Pin Name Type Function
1 CS# Input Active-low chip select; selects the device for SPI operations
2 SO/IO1 I/O Serial data output in SPI; IO1 in Dual/Quad/QPI modes
3 WP#/IO2 I/O Write protect in SPI; IO2 in Quad/QPI modes
4 VSS Power Ground reference
5 SI/IO0 I/O Serial data input in SPI; IO0 in Dual/Quad/QPI modes
6 SCK Input Serial clock; controls data transfer timing up to 133MHz
7 HOLD#/IO3 I/O Hold in SPI; IO3 in Quad/QPI modes
8 VCC Power Power supply (2.3V to 3.6V)
Application Scenarios: In which products and applications is IS25LP016D-JNLE-TR used
  • Embedded XIP Code Storage: Stores MCU firmware with 133MHz Quad I/O enabling execute-in-place from the flash, eliminating the need to copy code to RAM.
  • FPGA Configuration: Stores FPGA configuration bitstream with AutoBoot for rapid power-on configuration in industrial and consumer applications.
  • IoT Sensor Nodes: Provides 2MB of non-volatile storage for firmware and sensor data with 1uA deep power down and 3V operation from battery or energy harvesting.
  • Industrial Control: Stores PLC and motor controller firmware with program/erase suspend enabling real-time reads during firmware updates.
Alternative Models: What chips are recommended as replacements for IS25LP016D-JNLE-TR
Manufacturer Part Number Package Density Notes
ISSI IS25WP016D-JNLE-TR SOIC-8 16Mbit 1.8V version (1.65-1.95V)
ISSI IS25LP016D-JBLE-TR SOIC-8 208mil 16Mbit Wide SOIC-8 (208mil) package
Macronix MX25L1606EMRI SOIC-8 16Mbit Industry-standard pin-compatible
Winbond W25Q16JVSSIQ SOIC-8 16Mbit Popular pin-compatible alternative

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1