Opens in a new tab

IS42S16160J-7TLI

256Mbit SDR SDRAM, 16Mx16, 143MHz, 3.3V, LVTTL, 54-TSOP-II, Industrial

11162

Effective Inventory

Image for reference only

Manufacturer Part:

IS42S16160J-7TLI

Package:

54-TSOP-II (22.22 x 10.16 x 1.0 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The IS42S16160J-7TLI is a ISSI product designed for electronic applications. It features compact design with reliable performance characteristics suitable for various industrial and consumer applications.

Key Specifications

Memory Type SDR SDRAM
Density 256Mbit (32MB)
Organization 16M x 16
Internal Banks 4
Interface LVTTL (Parallel)
Max Clock Frequency 143 MHz (-7 speed grade)
Access Time 5.4 ns
Row Addressing A0-A12 (8192 rows)
Column Addressing A0-A8 (512 columns)
Supply Voltage 3.0V to 3.6V (3.3V Typ)
Programmable CAS Latency 2, 3 clocks
Programmable Burst Length 1, 2, 4, 8, Full Page
Burst Sequence Sequential / Interleave
Refresh 8K cycles / 64ms (Com/Ind/A1)
Operating Temperature -40 C to +85 C (Industrial)
Package 54-TSOP-II (10.16mm width)
Part Status Production

Features

256Mbit SDR SDRAM organized as 16M x 16; 143MHz/166MHz maximum clock frequency; 4 internal banks for concurrent operation; Single 3.3V +/- 0.3V power supply; LVTTL-compatible inputs and outputs; Programmable CAS latency (2, 3 clocks); Programmable burst length (1, 2, 4, 8, full page); Programmable burst sequence (sequential/interleave); Auto precharge function; Auto refresh (CBR); Self refresh mode; All signals referenced to positive clock edge; 54-TSOP-II and 54-BGA package options

Applications

Embedded systems main memory; Industrial control and automation; Networking equipment buffer memory; Consumer electronics; Set-top boxes and digital TVs; Data logging systems; Video frame buffering; Communication equipment

Product Introduction: IS42S16160J-7TLI Product Introduction

The IS42S16160J-7TLI from ISSI is a 256Mbit SDR SDRAM organized as 16M x 16 bits, providing 32MB of synchronous DRAM in a 54-TSOP-II package. The device operates at a maximum clock frequency of 143MHz with 5.4ns access time, suitable for mid-range embedded and industrial memory applications. The quad-bank architecture enables concurrent operation by allowing one bank to be precharged while another is being accessed, hiding precharge latency for sustained throughput. Each of the four 67,108,864-bit banks is organized as 8,192 rows by 512 columns by 16 bits. The device supports programmable CAS latency of 2 or 3 clocks and programmable burst lengths including 1, 2, 4, 8, and full page modes. The -7TLI designation indicates the 143MHz speed grade (7ns tCK), industrial temperature range (-40C to +85C), TSOP-II package with matte tin (Sn) leads, and industrial grade qualification. This device is also available in a 54-ball TF-BGA (8x13mm) package for space-constrained applications.

Working Principle: IS42S16160J-7TLI Working Principle

The IS42S16160J-7TLI operates as a synchronous dynamic RAM where all input signals are registered on the positive edge of the system clock (CLK). The memory array consists of four independent banks, each containing 4M words of 16 bits. Access begins with an ACTIVE command that latches the bank select (BA0-BA1) and row address (A0-A12) to activate a specific row in the selected bank. A subsequent READ or WRITE command provides the column address (A0-A8) with A10 controlling auto precharge. Data is transferred in burst mode starting at the selected column, continuing for the programmed burst length (1, 2, 4, 8, or full page) in either sequential or interleave order. The auto precharge feature initiates row precharge at the end of the burst, reducing the need for explicit PRECHARGE commands. The DQML and DQMH signals provide byte-level data masking during write operations and output enable/disable control during reads. Periodic refresh is required with 8192 cycles every 64ms, performed automatically via auto refresh (CBR) or maintained during low-power states via self refresh mode.

Pin Description: IS42S16160J-7TLI Pin Definition and Functions
Pin Name Type Function
A0-A12 Address Inputs Input Multiplexed address; row (A0-A12) during ACTIVE, column (A0-A8) during READ/WRITE
BA0, BA1 Bank Select Input Selects one of 4 internal banks
DQ0-DQ15 Data I/O I/O 16-bit bidirectional data bus
CLK System Clock Input Master clock; all inputs sampled on rising edge
CKE Clock Enable Input Enables/disables CLK; controls power-down and self refresh entry
CS# Chip Select Input Active-low chip select
RAS# Command Input Input Row address strobe (command encoding with CAS#, WE#)
CAS# Command Input Input Column address strobe (command encoding with RAS#, WE#)
WE# Write Enable Input Write enable (command encoding with RAS#, CAS#)
DQML Lower Byte Mask Input Masks DQ0-DQ7 during writes; enables/disables lower byte outputs
DQMH Upper Byte Mask Input Masks DQ8-DQ15 during writes; enables/disables upper byte outputs
Application Scenarios: In which products and applications is IS42S16160J-7TLI used
  • Embedded System Main Memory: Provides 32MB of SDR SDRAM for microcontrollers, FPGAs, and SoCs in industrial applications requiring moderate bandwidth at 143MHz.
  • Industrial Control: Serves as working memory for PLCs and industrial automation controllers with reliable 3.3V SDR SDRAM interface.
  • Networking Buffer: Packet buffering in network equipment with quad-bank interleaving for sustained throughput during burst transfers.
  • Video Frame Buffer: Stores video frame data in display and imaging systems with 16-bit data bus for efficient pixel access.
Alternative Models: What chips are recommended as replacements for IS42S16160J-7TLI
Manufacturer Part Number Package Density Notes
ISSI IS42S16160J-7BLI 54-TFBGA 256Mbit BGA package variant (8x13mm)
ISSI IS42S16160J-6TLI 54-TSOP-II 256Mbit 166MHz speed grade
Alliance Memory AS4C16M16SA-7TCN 54-TSOP-II 256Mbit Pin-compatible alternative
Winbond W9816G6KH-6 54-TSOP-II 256Mbit Industry-standard alternative

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1