Opens in a new tab

IS43TR16256BL-125KBLI

4Gbit DDR3L SDRAM, 256Mx16, 1600MT/s, CL11, 1.35V/1.5V, 96-BGA, Industrial, AEC-Q100

7118

Effective Inventory

Image for reference only

Manufacturer Part:

IS43TR16256BL-125KBLI

Package:

96-TWBGA (9.0 x 13.0 x 1.2 mm)

Brand:

Quality Commitment

Shipping & Payment

Service & Packaging

Product Manual

Description

Product Overview

The IS43TR16256BL-125KBLI is a ISSI product designed for electronic applications. It features compact design with reliable performance characteristics suitable for various industrial and consumer applications.

Key Specifications

Memory Type DDR3L SDRAM
Density 4Gbit (512MB)
Organization 256M x 16
Internal Banks 8
Interface SSTL-15 (Parallel)
Speed Grade DDR3-1600K (CL=11, tRCD=11, tRP=11)
Data Rate 1600 MT/s
Max Clock Frequency 800 MHz (DDR)
Supply Voltage VDD 1.35V (Low Voltage, backward compatible to 1.5V)
Supply Voltage VDDQ 1.35V (backward compatible to 1.5V)
Operating Current 276 mA (Max)
Refresh Interval 7.8us (8192 cycles/64ms) at -40C to 85C
Prefetch Architecture 8n-bit
Programmable CAS Latency 5, 6, 7, 8, 9, 10, 11
Programmable Burst Length 4, 8 (with on-the-fly switching)
Operating Temperature -40 C to +95 C (Industrial)
Package 96-TWBGA (9.0 x 13.0 mm)
Ball Pitch 0.8 mm

Features

4Gbit DDR3L SDRAM organized as 256M x 16; DDR3-1600 speed grade (CL11); 1.35V low voltage operation, backward compatible to 1.5V; 8 internal banks for concurrent operation; 8n-bit prefetch architecture; Programmable CAS latency (5-11); On-the-fly burst length switching (4/8); Auto self refresh (ASR) with temperature sensor; Self refresh temperature (SRT) compensation; Partial array self refresh; Dynamic ODT (On-Die Termination); OCD (Off-Chip Driver Impedance Adjustment); Write leveling for DDR3 fly-by topology; ZQ calibration; Asynchronous RESET pin; 96-ball BGA (9x13mm) package

Applications

Automotive infotainment and ADAS; Industrial embedded computing; Telecom and networking equipment; Server and datacenter; FPGA memory interface; Video processing and display; Data logging and buffering; High-performance embedded systems

Product Introduction: IS43TR16256BL-125KBLI Product Introduction

The IS43TR16256BL-125KBLI from ISSI is a 4Gbit DDR3L SDRAM organized as 256M x 16 bits, operating at DDR3-1600 speed grade with CL11-11-11 timing. The device supports 1.35V low-voltage operation (DDR3L) while maintaining backward compatibility with standard 1.5V DDR3 voltage. The 8n-bit prefetch architecture and 8-bank design enable high-bandwidth data transfer at 1600 MT/s (800MHz DDR clock). The BL suffix indicates the 1.35V DDR3L variant in 96-ball BGA (9x13mm) package, while the I suffix denotes industrial temperature grade (-40C to +95C). The device incorporates advanced DDR3 features including dynamic ODT for signal integrity, write leveling for fly-by topology board designs, auto self refresh (ASR) with temperature-compensated refresh rate, and ZQ calibration for output driver and ODT impedance accuracy. The 256K speed bin specifies DDR3-1600 with CL=11, tRCD=11, tRP=11 timing parameters.

Working Principle: IS43TR16256BL-125KBLI Working Principle

The IS43TR16256BL-125KBLI operates as a double-data-rate synchronous dynamic RAM where data is transferred on both rising and falling edges of the clock signal, achieving twice the data rate per clock cycle. The 8n-bit prefetch architecture reads 8n bits from the DRAM array per access, where n is the configurable burst length (4 or 8), enabling the high external data rate while keeping the internal array access rate manageable. The DDR3 interface uses SSTL-15 signaling with differential data strobes (DQS/DQS#) for source-synchronous data capture. The fly-by clock/command/address topology (unique to DDR3) requires write leveling, a training sequence where the controller adjusts the DQS timing relative to the clock to compensate for propagation delay differences across the signal group. Dynamic ODT allows the termination value to change between write and read operations without a dedicated mode register set command. Auto self refresh (ASR) uses an internal temperature sensor to adjust the refresh interval automatically: 7.8us at normal temperatures, doubling every 10-20C above 85C to maintain data integrity at elevated temperatures. ZQ calibration uses an external 240-ohm reference resistor to calibrate the output driver and ODT impedance for signal integrity.

Pin Description: IS43TR16256BL-125KBLI Pin Definition and Functions
Pin Group Name Type Function
A0-A14 Address Inputs Input Multiplexed row/column address; row during ACTIVATE, column during READ/WRITE
BA0-BA2 Bank Select Input Selects one of 8 internal banks
DQ0-DQ15 Data I/O I/O 16-bit bidirectional data bus
DQS0/DQS0#, DQS1/DQS1# Data Strobe I/O Differential data strobe for source-synchronous data capture
DM0, DM1 Data Mask Input Data mask for write operations; masks corresponding byte lane
CK, CK# Differential Clock Input Differential system clock; commands sampled on rising edge
CKE Clock Enable Input Enables/disables clock; controls power-down and self refresh
CS# Chip Select Input Active-low chip select
ODT On-Die Termination Input Enables/disables internal termination resistance on DQ/DQS pins
RESET# Asynchronous Reset Input Active-low asynchronous reset; clears internal state
ZQ Calibration Reference Reference Connects to external 240-ohm resistor for impedance calibration
Application Scenarios: In which products and applications is IS43TR16256BL-125KBLI used
  • Automotive Infotainment: Provides 512MB of DDR3L memory for infotainment ECUs with 1.35V low power operation and industrial temperature range.
  • Industrial Embedded Computing: Serves as main memory for FPGA and SoC-based industrial controllers with DDR3-1600 bandwidth for real-time data processing.
  • Telecom/Networking: Packet buffering and data plane memory in switches and routers with 1600 MT/s throughput and dynamic ODT for signal integrity.
  • Video Processing: Frame buffer memory for video processing and display systems with high bandwidth and write leveling for multi-DIMM configurations.
Alternative Models: What chips are recommended as replacements for IS43TR16256BL-125KBLI
Manufacturer Part Number Package Density Notes
ISSI IS43TR16256B-125KBL 96-BGA 4Gbit 1.5V only variant (no L)
ISSI IS46TR16256BL-125KBLI 96-BGA 4Gbit Automotive grade (A1-A3 temp)
Micron MT41K256M16TW-107 96-BGA 4Gbit Pin-compatible DDR3L alternative
ISSI IS43TR16256BL-107MBLI 96-BGA 4Gbit Same density, DDR3-1866 speed grade

Recommend Parts

ISO1176TDWR

Isolated RS-485 transceiver, 40Mbps, integrated transformer driver, SOIC-16

Brand: TI

Package: SOIC-16 (DW, wide-body, 10.3 x 10.3 mm)

IN STOCK: 6874pcs

Cargo cycle: 3-7 Days

The minimum order is 1

IRFB4020PBF

200V N-Channel HEXFET Power MOSFET, 31A, 68 mΩ RDS(on), TO-220AB

Brand: infineon

Package: TO-220AB

IN STOCK: 14149pcs

Cargo cycle: 3-7 Days

The minimum order is 1

NRF52832-QFAA-T

Nordic BLE SoC, ARM Cortex-M4 @ 64MHz, 64KB Flash, 32KB RAM, QFN-48

Package: See datasheet

IN STOCK: 10958pcs

Cargo cycle: 3-7 Days

The minimum order is 1

UCC28740DR

CVCC Flyback Controller, 700V startup, opto feedback, <10mW no-load, SOIC-7

Brand: TI

Package: SOIC-7 (4.9 x 3.9 x 1.75 mm)

IN STOCK: 4840pcs

Cargo cycle: 3-7 Days

The minimum order is 1

MMUN2211LT1G

NPN digital transistor, R1=10kΩ R2=10kΩ, 50V, 100mA, SOT-23-3, pre-biased BRT switch

Brand: Onsemi

Package: SOT-23-3 (TO-236, SC-59)

IN STOCK: 8500pcs

Cargo cycle: 3-7 Days

The minimum order is 1

TMS320F2810PBKA

C2000 Delfino DSP controller, 150MHz, 128KB Flash, BGA-179

Brand: TI

Package: BGA-179 (16 x 16 mm, PBK package)

IN STOCK: 3124pcs

Cargo cycle: 3-7 Days

The minimum order is 1